Name | Acid Blue 80 |
Synonyms | CI 61585 C.I. 61585 ACID BLUE 80 Acid Blue 80 Acid Blue 80 C.I. Acid Blue 80 Acid Blue 80 (C.I.) acid blue 80 (C.I. 61585) Weakl Acid Brilliant Blue RAW 4,6-trimethyl-)bis(disodiumsalt 4,4'-(1,4-anthraquinonylenediimino)di-2-mesitylenesulfonicacidisodiums sodium 3,3-(9,10-dioxoanthracene-1,4-diyldiimino)bis(2,4,6-trimethylbenzenesulphonate) 3,3'-[(9,10-dioxo-9,10-dihydroanthracene-1,4-diyl)diimino]bis(2,4,6-trimethylbenzenesulfonic acid) disodium 3,3'-[(9,10-dioxo-9,10-dihydroanthracene-1,4-diyl)diimino]bis(2,4,6-trimethylbenzenesulfonate) |
CAS | 4474-24-2 |
EINECS | 224-748-4 |
InChI | InChI=1/C32H30N2O8S2/c1-15-13-17(3)31(43(37,38)39)19(5)27(15)33-23-11-12-24(26-25(23)29(35)21-9-7-8-10-22(21)30(26)36)34-28-16(2)14-18(4)32(20(28)6)44(40,41)42/h7-14,33-34H,1-6H3,(H,37,38,39)(H,40,41,42) |
InChIKey | UHXQPQCJDDSMCB-UHFFFAOYSA-L |
Molecular Formula | C32H31N2NaO8S2 |
Molar Mass | 658.72 |
Density | 1.537[at 20℃] |
Melting Point | >300°C(lit.) |
Water Solubility | 10.95g/L at 20℃ |
Storage Condition | Room Temprature |
Refractive Index | 1.679 |
Physical and Chemical Properties | Blue powder. Soluble in water, aqueous solution was concentrated blue, hydrochloric acid or sodium hydroxide were Magenta. Red Blue in concentrated sulfuric acid, diluted to Green Blue; Brown in concentrated nitric acid. |
Hazard Symbols | Xi - Irritant |
Risk Codes | 36 - Irritating to the eyes |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39 - Wear suitable gloves and eye/face protection |
WGK Germany | 2 |
RTECS | DB6083000 |
color index | 61585 |
LogP | -1.304 at 20℃ |
EPA chemical information | Information provided by: ofmpub.epa.gov (external link) |
introduction | acid blue 80 is a blue powder, easily soluble in water, the aqueous solution is thick blue, and the addition of hydrochloric acid or sodium hydroxide is magenta. The dye is red and blue in concentrated sulfuric acid, and turns to green and blue after dilution; it is brown in concentrated nitric acid. Acid blue 80 is a typical dye with refractory anthraquinone functional group. At present, activated carbon method, aerobic and anaerobic biological method are usually used to treat its dye wastewater. Acid blue 80 index ("ABI") is carbon The relative measure of the amount of material adsorbed acid blue 80 from standard solution. |
use | weak acid brilliant blue RAW is mainly used for dyeing wool, silk, nylon and their blended fabrics, and direct printing of wool and silk fabrics. It is used for dyeing wool, silk thick, nylon and their blended fabrics, and can also be printed directly on wool and silk thick fabrics. Used for dyeing wool, silk, nylon and their blended fabrics |
Production method | It is obtained by condensation of 1,4 dihydroxyanthraquinone and trimethylaniline, then sulfonated with fuming sulfuric acid and salted out. Raw material consumption (kg/t) trimethylaniline (98%) 7021, 4-dihydroxyanthraquinone (98%) 304 fuming sulfuric acid (20% SO3) 2960 using 1, 4-dihydroxyanthraquinone and trimethylaniline (2,4, 6-trimethylaniline) as raw materials, the two are first condensed, then sulfonated with fuming sulfuric acid and then neutralized to obtain the product. The finished product is salted out, filtered, dried and crushed.. It is also possible to use 1, 4-dichloroanthraquinone and trimethylaniline condensation, sulfonation, neutralization to obtain the product. 5.9 parts of trimethylaniline, 1.37 parts of hydrochloric acid, 1 part of 1, 4-dihydroxyanthraquinone, 1.24 parts of boric acid and 3.7 parts of glacial acetic acid were added into the reaction kettle, CO2 was immediately introduced, 0.4 parts of zinc powder were added when heated to 85 ℃, the temperature was continued to 115 ℃ for reaction for 20h, then the reaction solution was poured into 112g of 98% sulfuric acid preheated to 70 ℃, heated and refluxed for 1h, filtered, and washed with water until neutral. The filter cake 103-105g was refined with Na2CO3 solution. Take 30g of the above filter cake and add 210g of 20% fuming sulfuric acid to the reactor, react at 50 ℃ for 2h, and treat with salt, soda ash and sodium bisulfite to obtain the dye finished product. |