尼龙612
Nylon 6/12
CAS: 26098-55-5
Molecular Formula: C54H102N6O6X2
尼龙612 - Names and Identifiers
尼龙612 - Physico-chemical Properties
| Molecular Formula | C54H102N6O6X2 |
| Molar Mass | 931.42 |
| Density | 1.3g/mLat 25°C(lit.) |
| Melting Point | 218°C(lit.) |
| Solubility | strong proton donor solvents, acetic acid and phenols: soluble |
| Appearance | pellets |
| Storage Condition | 室温 |
| MDL | MFCD00134001 |
尼龙612 - Risk and Safety
| WGK Germany | 3 |
尼龙612 - Introduction
Nylon 6/12 is a synthetic polymer with the following properties:
1. Physical properties: Nylon 6/12 has a high melting point and heat resistance, the melting point is about 180°C, and it has good wear resistance and impact resistance.
2. chemical properties: nylon 6/12 has certain resistance to acid, alkali, solvent and grease, but is sensitive to ultraviolet light and oxygen.
3. Mechanical properties: nylon 6/12 has high tensile strength and stiffness, and also has certain elasticity and ductility.
Nylon 6/12 has a wide range of uses, mainly in the following aspects:
1. Textiles: nylon 6/12 fiber can be used to make high-strength ropes, fishing lines, fishing nets and other textiles, and can also be used to make sportswear and outdoor products.
2. Industrial applications: Nylon 6/12 is widely used in various industrial products, such as light mechanical parts, auto parts, tools and equipment accessories.
3. film and coating: nylon 6/12 can be made into film for food packaging, pharmaceutical industry and other packaging fields, and can also be used for coating materials to increase the wear resistance and corrosion resistance of products.
The preparation method of nylon 6/12 generally adopts polymerization reaction, in which the synthesis of nylon 6/12 is mainly obtained by condensation reaction of caprolactam (Nylon 6) and laurolactam (Nylon 12).
Regarding safety information, nylon 6/12 is a relatively safe material, but the following points should be paid attention to during its preparation and use:
1. High melting point, potential fire risk: Follow safe operating procedures during processing and use to prevent high temperature from causing fire.
2. UV-sensitive: Nylon 6/12 is sensitive to UV rays and is prone to degradation under long-term or excessive exposure to UV rays. Therefore, when used outdoors, it should be protected from shading.
3. may release toxic gases: when nylon 6/12 burns, it may release toxic gases. Keep away from combustion sources and maintain a well-ventilated environment.
In general, nylon 6/12 is a multifunctional synthetic polymer with a wide range of applications and good performance, but it is necessary to follow safe operating procedures during use to ensure safe use.
1. Physical properties: Nylon 6/12 has a high melting point and heat resistance, the melting point is about 180°C, and it has good wear resistance and impact resistance.
2. chemical properties: nylon 6/12 has certain resistance to acid, alkali, solvent and grease, but is sensitive to ultraviolet light and oxygen.
3. Mechanical properties: nylon 6/12 has high tensile strength and stiffness, and also has certain elasticity and ductility.
Nylon 6/12 has a wide range of uses, mainly in the following aspects:
1. Textiles: nylon 6/12 fiber can be used to make high-strength ropes, fishing lines, fishing nets and other textiles, and can also be used to make sportswear and outdoor products.
2. Industrial applications: Nylon 6/12 is widely used in various industrial products, such as light mechanical parts, auto parts, tools and equipment accessories.
3. film and coating: nylon 6/12 can be made into film for food packaging, pharmaceutical industry and other packaging fields, and can also be used for coating materials to increase the wear resistance and corrosion resistance of products.
The preparation method of nylon 6/12 generally adopts polymerization reaction, in which the synthesis of nylon 6/12 is mainly obtained by condensation reaction of caprolactam (Nylon 6) and laurolactam (Nylon 12).
Regarding safety information, nylon 6/12 is a relatively safe material, but the following points should be paid attention to during its preparation and use:
1. High melting point, potential fire risk: Follow safe operating procedures during processing and use to prevent high temperature from causing fire.
2. UV-sensitive: Nylon 6/12 is sensitive to UV rays and is prone to degradation under long-term or excessive exposure to UV rays. Therefore, when used outdoors, it should be protected from shading.
3. may release toxic gases: when nylon 6/12 burns, it may release toxic gases. Keep away from combustion sources and maintain a well-ventilated environment.
In general, nylon 6/12 is a multifunctional synthetic polymer with a wide range of applications and good performance, but it is necessary to follow safe operating procedures during use to ensure safe use.
Last Update：2024-04-10 22:41:30
