(3-Morpholinylmethyl)carbamic acid 1,1-dimethylethyl ester - Names and Identifiers
Name | 3-N-Boc-aminomethylmorpholine
|
Synonyms | 3-N-Boc-aminomethylmorpholine tert-Butyl (morpholin-3-ylmethyl)carbamate tert-butyl N-(Morpholin-3-ylMethyl)carbaMate (3-Morpholinylmethyl)carbamic acid 1,1-dimethylethyl ester Carbamic acid, (3-morpholinylmethyl)-, 1,1-dimethylethyl ester (9CI)
|
CAS | 169750-75-8
|
InChI | InChI=1/C10H20N2O3/c1-10(2,3)15-9(13)12-6-8-7-14-5-4-11-8/h8,11H,4-7H2,1-3H3,(H,12,13) |
(3-Morpholinylmethyl)carbamic acid 1,1-dimethylethyl ester - Physico-chemical Properties
Molecular Formula | C10H20N2O3
|
Molar Mass | 216.28 |
Density | 1.032±0.06 g/cm3(Predicted) |
Boling Point | 334.0±17.0 °C(Predicted) |
Flash Point | 155.8°C |
Vapor Presure | 0.000131mmHg at 25°C |
pKa | 12?+-.0.46(Predicted) |
Storage Condition | 2-8°C(protect from light) |
Refractive Index | 1.452 |
(3-Morpholinylmethyl)carbamic acid 1,1-dimethylethyl ester - Introduction
It is an organic compound with the chemical formula C10H21NO2.
Properties: M3MT is a colorless or light yellow liquid with a special amide odor. It is soluble in alcohol, ether and some organic solvents, insoluble in water. It has a lower vapor pressure and a higher boiling point.
Uses: M3MT is mainly used as a light stabilizer, which can prevent the decomposition of ultraviolet light in materials such as polymers, plastics and rubber, thereby extending its service life and stability. In addition, M3MT can also be used for antioxidants, lubricants and preservatives of polymer materials.
Preparation Method: The preparation of M3MT is usually carried out by reacting an amino acid with an acid chloride. Specifically, morpholine and tert-Butyl formate are reacted with an appropriate amount of amino acid in an appropriate solvent, and the target product can be obtained through steps such as crystallization and purification after the reaction.
Safety information: The toxicity of M3MT is low, but it is still necessary to pay attention to safe operation. Avoid inhaling, swallowing, or contact with skin and eyes. Personal protective equipment such as protective gloves, goggles and protective clothing should be worn during operation. Storage should be kept away from fire and oxidizing agents, keep the container sealed, and the storage temperature should be less than 40 degrees Celsius. If splashed on the skin or eyes, rinse immediately with water and seek medical help. Follow the relevant safety guidelines and regulations.
Last Update:2024-04-10 22:29:15