1-3-fluorobenzene

1-3-fluorobenzene - Names and Identifiers

Name	1-(dibromomethyl)-3-fluorobenzene
Synonyms	ALPH 1-3-fluorobenzene 3-FLUOROBENZAL BROMIDE 1-(dibromomethyl)-3-fluorobenzene meta-(Dibromomethyl)fluorobenzene 1-(DIBROMOMETHYL)-3-FLUOROBENZENE Fluorobenzene, meta-(dibromomethyl)-
CAS	455-34-5
InChI	InChI=1/C7H5Br2F/c8-7(9)5-2-1-3-6(10)4-5/h1-4,7H

1-3-fluorobenzene - Physico-chemical Properties

Molecular Formula	C7H5Br2F
Molar Mass	267.92
Density	1.915g/mLat 25°C(lit.)
Boling Point	108-110°C8mm Hg(lit.)
Flash Point	>230°F
Vapor Presure	0.101mmHg at 25°C
Specific Gravity	1.915
Storage Condition	Room Temprature
Refractive Index	n20/D 1.587(lit.)
MDL	MFCD00010354

1-3-fluorobenzene - Risk and Safety

Hazard Symbols	C - Corrosive
Risk Codes	R34 - Causes burns R36/37 - Irritating to eyes and respiratory system.
Safety Description	S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S27 - Take off immediately all contaminated clothing. S28 - After contact with skin, wash immediately with plenty of soap-suds. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
UN IDs	UN 3265 8/PG 2
WGK Germany	3
Hazard Note	Corrosive/Lachrymator
Hazard Class	8
Packing Group	III

1-3-fluorobenzene - Introduction

1-(dibromomethyl)-3-fluorobenzene is an organic compound with the molecular formula C7H5Br2F and the structural formula C6H4CH(F)Br2. The specific nature is as follows:

1. Appearance: 1-(dibromomethyl)-3-fluorobenzene is a colorless to pale yellow liquid.

2. Density: The density of this compound is 1.99g/cm³.

3. melting point and boiling point: 1-(dibromomethyl)-3-fluorobenzene has a melting point of 11-12 ℃ and a boiling point of 126-128 ℃.

4. Solubility: 1-(dibromomethyl)-3-fluorobenzene is soluble in common organic solvents, such as ether, methanol and dichloromethane.

5. Uses: 1-(dibromomethyl)-3-fluorobenzene is an important organic synthesis intermediate, which has a wide range of uses in the fields of pharmaceuticals and pesticides. It can be used as a raw material for the synthesis of other compounds such as pharmaceuticals and pesticides.

6. Preparation method: A common preparation method is to prepare 1-(dibromomethyl)-3-fluorobenzene by fluorination and methylation of benzene.

7. Safety information: When handling 1-(dibromomethyl)-3-fluorobenzene, care should be taken to avoid contact with skin and eyes, and to ensure that the operation is carried out in a well-ventilated place. In addition, the substance may cause adverse effects on the environment and waste should be handled and disposed of with care. When using or handling the compound, it is necessary to comply with relevant safety practices.

Last Update：2024-04-09 20:52:54