1-Naphthaldehyde, 2-hydroxy-
2-Hydroxy-1-naphthaldehyde
CAS: 708-06-5
Molecular Formula: C11H8O2
1-Naphthaldehyde, 2-hydroxy- - Names and Identifiers
| Name | 2-Hydroxy-1-naphthaldehyde |
| Synonyms | TIMTEC-BB SBB003835 1-Formyl-2-naphthol 2-Hyroxy-1-Naphthyldhyd 2-Hydroxy-1-phthaldehyde 2-hydroxy-1-naphthaldehyd 2-Hydroxy-1-naphthaldehyde 2-Hydroxy-1-naphthalaldehyde 1-Naphthaldehyde, 2-hydroxy- 1-formyl-2-hydroxynaphthalene 1-Formyl-2-hydroxy-naphthalene 1-Hydroxy-2-naphthalenecarboxaldehyde |
| CAS | 708-06-5 |
| EINECS | 211-902-0 |
| InChI | InChI=1/C11H8O2/c12-7-10-9-4-2-1-3-8(9)5-6-11(10)13/h1-7,13H |
1-Naphthaldehyde, 2-hydroxy- - Physico-chemical Properties
| Molecular Formula | C11H8O2 |
| Molar Mass | 172.18 |
| Density | 1.1153 (rough estimate) |
| Melting Point | 76-80 °C (lit.) |
| Boling Point | 192 °C/27 mmHg (lit.) |
| Flash Point | 191-193°C/27mm |
| Water Solubility | Soluble in water (40 g/L at 20°C). |
| Solubility | Chloroform, Methanol |
| Vapor Presure | 0.002Pa at 20℃ |
| Appearance | Crystalline powder |
| Color | Yellow |
| BRN | 742777 |
| pKa | 8.27±0.50(Predicted) |
| Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
| Sensitive | Air Sensitive |
| Refractive Index | 1.5500 (estimate) |
| MDL | MFCD00004005 |
| Physical and Chemical Properties | Colorless needle-like or prismatic crystals. The melting point of 82 deg C, boiling point of 192 deg C (3.6kPa). Soluble in ethanol, ether and petroleum, insoluble in water, soluble in aqueous alkali solution, soluble in concentrated sulfuric acid yellow. Slightly volatile in the steam, iron chloride Brown. Preparation Method: from 2-naphthol and chloroform reaction derived. Ethanol and 2-naphthol were added to the reaction pot, and the mixture was heated to 40 ° C. And stirred for 0.5 hours. Then 30% sodium hydroxide solution was added, and the temperature was raised to 75 °c. Chloroform was added dropwise to control the reaction temperature to 78 °c. After the addition, the temperature was maintained at 78 °c for 2H. Then, the temperature was raised to 90 ° C., and ethanol and excess chloroform were distilled off. After steaming, the mixture was cooled to below 30 ° C., and allowed to stand for 6 hours. The filtrate was filtered, stirred with water, heated to 60 °c and neutralized with hydrochloric acid to a pH of 2-3. Cooling, filtration, drying of the filter cake below 60 °c, to obtain the finished product. Purposes: the product is an intermediate in organic synthesis, but also for the determination of palladium, beryllium Analytical reagents. The fluorescent whitening agent PEB can be synthesized by the ring formation of 2-hydroxy-1-naphthalene formaldehyde and diethyl malonate in the presence of acetic anhydride. Add 28 kg2-hydroxy -1-naphthalene formaldehyde, 29kg of diethyl malonate and 50kg of acetic anhydride into the reaction pot, stir, heat to 130 ℃, Reflux 8H. Heating was stopped and stirring was continued for 1H. It was cooled to 80 °c and allowed to stand for 24h. Filter with suction, wash the cake with 10% soda ash solution, and then wash the cake to Neutral with clear water. The filter cake was then added to 40kg of alcohol and dissolved by heating. Cooling, filtration. The filter cake was washed with a small amount of ethanol, dried at 60 ° C., and pulverized to obtain a standard of 36kg of fluorescent whitening agent PEB. The fluorescent whitening agent PEB is mainly used for the whitening of white materials such as selurolo White Material, polyvinyl chloride, acetic acid fiber and the brightening of coloring materials. |
| Use | Used as dye, fluorescent whitening agent Intermediate |
1-Naphthaldehyde, 2-hydroxy- - Risk and Safety
| Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin. R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S60 - This material and its container must be disposed of as hazardous waste. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. S24/25 - Avoid contact with skin and eyes. S37 - Wear suitable gloves. |
| UN IDs | UN 3077 9/PG 3 |
| WGK Germany | 2 |
| RTECS | QJ0300000 |
| TSCA | Yes |
| HS Code | 29124990 |
| Hazard Class | 9 |
1-Naphthaldehyde, 2-hydroxy- - Reference Information
| LogP | 6 at 23℃ and pH8 |
| NIST chemical information | information provided by: webbook.nist.gov (external link) |
| EPA chemical substance information | information provided by: ofmpeb.epa.gov (external link) |
| purpose | This product is an intermediate in organic synthesis and an analytical reagent for the determination of palladium and beryllium. The fluorescent whitening agent PEB can be synthesized by the ring formation of 2-hydroxy-1-naphthalene formaldehyde and diethyl malonate in the presence of acetic anhydride. 28kg of 2-hydroxy-1-naphthalene formaldehyde, 29kg of diethyl malonate and 50kg of acetic anhydride were added into the reaction pot, stirred, heated to 130 ° C., and refluxed for 8 hours. Heating was stopped and stirring was continued for 1H. It was cooled to 80 °c and allowed to stand for 24h. Filter with suction, wash the cake with 10% soda ash solution, and then wash the cake to Neutral with clear water. The filter cake was then added to 40kg of alcohol and dissolved by heating. Cooling, filtration. The filter cake was washed with a small amount of ethanol, dried at 60 ° C., and pulverized to obtain a standard of 36kg of fluorescent whitening agent PEB. The fluorescent whitening agent PEB is mainly used for the whitening of white materials such as selurolo White Material, polyvinyl chloride, acetic acid fiber and the brightening of coloring materials. used as intermediate of dye and fluorescent brightener |
| production method | results from the reaction of 2-naphthol with chloroform. Ethanol and 2-naphthol were added to the reaction pot, and the mixture was heated to 40 ° C. And stirred for 0.5 hours. Then 30% sodium hydroxide solution was added, and the temperature was raised to 75 °c. Chloroform was added dropwise to control the reaction temperature to 78 °c. After the addition, the temperature was maintained at 78 °c for 2H. Then, the temperature was raised to 90 ° C., and ethanol and excess chloroform were distilled off. After steaming, the mixture was cooled to below 30 ° C., and allowed to stand for 6 hours. The filtrate was filtered, stirred with water, heated to 60 °c and neutralized with hydrochloric acid to a pH of 2-3. Cooling, filtration, drying of the filter cake below 60 °c, to obtain the finished product. Purposes: the product is an intermediate in organic synthesis, but also for the determination of palladium, beryllium Analytical reagents. The fluorescent whitening agent PEB can be synthesized by the ring formation of 2-hydroxy-1-naphthalene formaldehyde and diethyl malonate in the presence of acetic anhydride. 28kg of 2-hydroxy-1-naphthalene formaldehyde, 29kg of diethyl malonate and 50kg of acetic anhydride were added into the reaction pot, stirred, heated to 130 ° C., and refluxed for 8 hours. Heating was stopped and stirring was continued for 1H. It was cooled to 80 °c and allowed to stand for 24h. Filter with suction, wash cake with 10% soda ash solution, The filter cake was then washed with clear water until neutral. The filter cake was then added to 40kg of alcohol and dissolved by heating. Cooling, filtration. The filter cake was washed with a small amount of ethanol, dried at 60 ° C., and pulverized to obtain a standard of 36kg of fluorescent whitening agent PEB. The fluorescent whitening agent PEB is mainly used for the whitening of white materials such as selurolo White Material, polyvinyl chloride, acetic acid fiber and the brightening of coloring materials. |
Last Update：2024-04-09 21:11:58
Supplier List
Spot supply
Product Name: CFL-137 Visit Supplier Webpage Request for quotationCAS: 708-06-5
Tel: 609-228-6898
Email: sales@medchemexpress.com
tech@medchemexpress.com
Mobile: 609-228-6898
Spot supply
Product Name: 2-Hydroxy-1-naphthaldehyde Visit Supplier Webpage Request for quotationCAS: 708-06-5
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185
Wechat: chinaskyrun
Spot supply
Product Name: 2-Hydroxy-1-naphthaldehyde Visit Supplier Webpage Request for quotationCAS: 708-06-5
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922
Wechat: 18621343501
WhatsApp: +86-18621343501
Spot supply
Product Name: 2-Hydroxy-1-naphthaldehyde Visit Supplier Webpage Request for quotationCAS: 708-06-5
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Spot supply
Product Name: 2-Hydroxy-1-naphthaldehyde Visit Supplier Webpage Request for quotationCAS: 708-06-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Spot supply
Product Name: CFL-137 Visit Supplier Webpage Request for quotationCAS: 708-06-5
Tel: 609-228-6898
Email: sales@medchemexpress.com
tech@medchemexpress.com
Mobile: 609-228-6898
Spot supply
Product Name: 2-Hydroxy-1-naphthaldehyde Visit Supplier Webpage Request for quotationCAS: 708-06-5
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185
Wechat: chinaskyrun
Spot supply
Product Name: 2-Hydroxy-1-naphthaldehyde Visit Supplier Webpage Request for quotationCAS: 708-06-5
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922
Wechat: 18621343501
WhatsApp: +86-18621343501
Spot supply
Product Name: 2-Hydroxy-1-naphthaldehyde Visit Supplier Webpage Request for quotationCAS: 708-06-5
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Spot supply
Product Name: 2-Hydroxy-1-naphthaldehyde Visit Supplier Webpage Request for quotationCAS: 708-06-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
View History
1-Naphthaldehyde, 2-hydroxy-
Methanone, (2,3,5,6-tetramethyl-1,4-phenylene)bis[(4-aminophenyl)- (9CI)
反-2-,顺-6-壬二烯醛
1,2-乙二胺与氮丙啶的聚合物
2-[(4-氯苯基)(吡啶-2-基)甲氧基]-N,N-二甲基乙胺
无水氨噻肟酸
四氟代硼酸根
NICOTINAMIDE CHLOROMETHYLATE
4,4'-BIS(2-AMINO-6-METHYLPYRIMIDYL) DISULFIDE
(2-溴-4-甲基苯基)甲醇
Methanone, (2,3,5,6-tetramethyl-1,4-phenylene)bis[(4-aminophenyl)- (9CI)
反-2-,顺-6-壬二烯醛
1,2-乙二胺与氮丙啶的聚合物
2-[(4-氯苯基)(吡啶-2-基)甲氧基]-N,N-二甲基乙胺
无水氨噻肟酸
四氟代硼酸根
NICOTINAMIDE CHLOROMETHYLATE
4,4'-BIS(2-AMINO-6-METHYLPYRIMIDYL) DISULFIDE
(2-溴-4-甲基苯基)甲醇