2-(3-FLUOROPHENYL)ETHANOL
3-Fluorophenethyl alcohol
CAS: 52059-53-7
Molecular Formula: C8H9FO
2-(3-FLUOROPHENYL)ETHANOL - Names and Identifiers
| Name | 3-Fluorophenethyl alcohol |
| Synonyms | 3-Fluorobenzeneethanol 3-Fluorophenethyl alcohol 2-(3-FLUOROPHENYL)ETHANOL 3-Fluorophenethylealcohol 2-(M-FLUOROPHENYL)ETHANOL 2-(3-Fluorophenyl)ethan-1-ol 2-(3-Fluorophenyl)ethyl Alcohol 3-Fluorophenethyl Alcohol |
| CAS | 52059-53-7 |
| InChI | InChI=1/C8H9FO/c9-8-3-1-2-7(6-8)4-5-10/h1-3,6,10H,4-5H2 |
2-(3-FLUOROPHENYL)ETHANOL - Physico-chemical Properties
| Molecular Formula | C8H9FO |
| Molar Mass | 140.15 |
| Density | 1.125 g/mL at 25 °C (lit.) |
| Boling Point | 90 °C/3 mmHg (lit.) |
| Flash Point | 225°F |
| Vapor Presure | 0.157mmHg at 25°C |
| Appearance | Liquid |
| Color | Clear colorless |
| pKa | 14.76±0.10(Predicted) |
| Storage Condition | Sealed in dry,Room Temperature |
| Refractive Index | n20/D 1.509(lit.) |
| MDL | MFCD00045998 |
2-(3-FLUOROPHENYL)ETHANOL - Risk and Safety
| Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin. R21/22 - Harmful in contact with skin and if swallowed. R34 - Causes burns |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S27 - Take off immediately all contaminated clothing. |
| UN IDs | 2810 |
| WGK Germany | 3 |
| HS Code | 29062990 |
2-(3-FLUOROPHENYL)ETHANOL - Introduction
3-Fluorophenethyl alcohol is an organic compound with the chemical formula C8H9FO. It is a colorless liquid with a special aromatic smell. The following is detailed information about 3-Fluorophenethyl alcohol:
Nature:
-Appearance: colorless liquid
-Boiling point: 216-218 degrees Celsius
-Melting point:-27 degrees Celsius
-Density: 1.138g/cm3
-Molecular weight: 138.16g/mol
-Solubility: Soluble in most organic solvents, such as ethanol, ether and chlorinated hydrocarbons
Use:
3-Fluorophenethyl alcohol is used industrially as an intermediate for the synthesis of other compounds. It also has a wide range of applications in the pharmaceutical industry, with common uses including:
-Synthetic pesticides and insecticides
-Synthetic drug intermediates, such as the antipsychotic drug alfadone amine
-Used as reagent and solvent for organic synthesis reaction
Preparation Method:
3-Fluorophenethyl alcohol can be prepared by the following methods:
-3-fluorostyrene can be obtained by fluorination reaction of styrene, and then reduced by hydrogen addition reaction to obtain 3-Fluorophenethyl alcohol.
-3-Fluorophenethyl alcohol can be obtained by reacting 3-fluorophenylacetic acid with a reducing agent (such as disodium hydrogen phosphite).
Safety Information:
3-Fluorophenethyl alcohol is usually relatively safe under normal conditions of use, but the following matters still need to be paid attention:
-It may have an irritating effect on the eyes, skin and respiratory tract. Use should be careful to avoid contact.
-Avoid contact with oxidants and flammable materials during use and storage.
-Storage should be kept in a closed container, away from fire and high temperature environment.
-If inhaled or ingested, seek medical attention immediately and show the chemical name and safety data sheet of the compound.
Nature:
-Appearance: colorless liquid
-Boiling point: 216-218 degrees Celsius
-Melting point:-27 degrees Celsius
-Density: 1.138g/cm3
-Molecular weight: 138.16g/mol
-Solubility: Soluble in most organic solvents, such as ethanol, ether and chlorinated hydrocarbons
Use:
3-Fluorophenethyl alcohol is used industrially as an intermediate for the synthesis of other compounds. It also has a wide range of applications in the pharmaceutical industry, with common uses including:
-Synthetic pesticides and insecticides
-Synthetic drug intermediates, such as the antipsychotic drug alfadone amine
-Used as reagent and solvent for organic synthesis reaction
Preparation Method:
3-Fluorophenethyl alcohol can be prepared by the following methods:
-3-fluorostyrene can be obtained by fluorination reaction of styrene, and then reduced by hydrogen addition reaction to obtain 3-Fluorophenethyl alcohol.
-3-Fluorophenethyl alcohol can be obtained by reacting 3-fluorophenylacetic acid with a reducing agent (such as disodium hydrogen phosphite).
Safety Information:
3-Fluorophenethyl alcohol is usually relatively safe under normal conditions of use, but the following matters still need to be paid attention:
-It may have an irritating effect on the eyes, skin and respiratory tract. Use should be careful to avoid contact.
-Avoid contact with oxidants and flammable materials during use and storage.
-Storage should be kept in a closed container, away from fire and high temperature environment.
-If inhaled or ingested, seek medical attention immediately and show the chemical name and safety data sheet of the compound.
Last Update：2024-04-09 19:05:50
Supplier List
Product Name: 3-Fluorophenethyl Alcohol Visit Supplier Webpage Request for quotation
CAS: 52059-53-7
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 52059-53-7
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: 3-Fluorophenethyl Alcohol Visit Supplier Webpage Request for quotation
CAS: 52059-53-7
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 52059-53-7
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History