3,6-DIMETHYLOCTANE - Names and Identifiers
3,6-DIMETHYLOCTANE - Physico-chemical Properties
| Molecular Formula | C10H22
|
| Molar Mass | 142.28 |
| Density | 0.7320 |
| Melting Point | -53.99°C |
| Boling Point | 160.81°C |
| Water Solubility | 86.93ug/L(temperature not stated) |
| Refractive Index | 1.4115 |
| Physical and Chemical Properties | EPA Chemical Information Octane, 3,6-dimethyl- (15869-94-0) |
3,6-DIMETHYLOCTANE - Upstream Downstream Industry
3,6-DIMETHYLOCTANE - Introduction
3,6-Dimethyloctane (3,6-dimethyloctane) is an organic compound with the molecular formula C10H22 and a structure containing an 8-carbon skeleton, there is a methyl group on each of carbons 3 and 6.
The following are the properties of 3,6-dimethyloctane:
-Appearance: colorless liquid
-Density: approx. 0.73g/cm³
-Melting point: About -102 ° C
-Boiling point: About 157-159 ° C
-Solubility: Soluble with many non-polar organic solvents, such as ethers, alkanes and chlorinated alkanes.
The main use of 3,6-dimethyloctane is as a solvent in organic synthesis. Due to its low polarity and high melting point, it can be used to dissolve oils, resins and colloids. In addition, it can also be used as a component of coatings and adhesives.
The preparation of 3,6-dimethyloctane is usually achieved using the reduction reaction of a diazonium salt. First, a suitable crown ether is reacted with cyclohexanone to form a diazonium salt, followed by reduction of O-xylene to give 3,6-dimethyloctane.
Regarding the safety information of 3,6-dimethyloctane, the following matters need to be noted:
-It is flammable, avoid contact with open flame or high temperature.
-Store in a closed container, away from heat sources and oxidants.
-Wear appropriate protective gloves and safety glasses when using.
-Avoid inhaling its vapor and ensure that it is operated in a well-ventilated place.
-Do not pour it into the drainage system or soil to avoid pollution to the environment.
-If a leak occurs, it should be removed immediately, and appropriate measures should be taken for treatment and disposal. For further guidance, please refer to the relevant safety data sheet (SDS).
Last Update：2024-04-10 22:29:15