4-Fluorobenzylzinc chloride, 0.5M solution in THF, AcroSeal - Names and Identifiers
4-Fluorobenzylzinc chloride, 0.5M solution in THF, AcroSeal - Physico-chemical Properties
Molecular Formula | C7H6ClFZn
|
Molar Mass | 209.96 |
Density | 0.952g/mLat 25°C |
Flash Point | 1°F |
Appearance | Solution |
Color | Yellow to orange to brown |
Storage Condition | 2-8°C |
Sensitive | Air Sensitive |
4-Fluorobenzylzinc chloride, 0.5M solution in THF, AcroSeal - Risk and Safety
Risk Codes | R11 - Highly Flammable
R14 - Reacts violently with water
R19 - May form explosive peroxides
R22 - Harmful if swallowed
R36/37/38 - Irritating to eyes, respiratory system and skin.
R40 - Limited evidence of a carcinogenic effect
R36/37 - Irritating to eyes and respiratory system.
|
Safety Description | S16 - Keep away from sources of ignition.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S33 - Take precautionary measures against static discharges.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S36/37 - Wear suitable protective clothing and gloves.
|
UN IDs | UN 2056 3/PG 2 |
WGK Germany | 1 |
HS Code | 29319090 |
Hazard Note | Flammable |
Hazard Class | 4.3 |
4-Fluorobenzylzinc chloride, 0.5M solution in THF, AcroSeal - Introduction
4-Fluorobenzylzinc chloride(4-Fluorobenzylzinc chloride) is an organic compound with the chemical formula C7H6ClFZn. The following is a description of some properties, uses, preparation and safety information about the compound:
Nature:
-Appearance: Colorless to yellow crystal or powder
-Melting point: about 120-130°C
-Solubility: Soluble in most organic solvents
Use:
- 4-Fluorobenzylzinc chloride can be used as a reagent in organic synthesis, for example, as an aryl zinc reagent in the reduction of aldehydes or ketones.
-The compound can also be used to construct complex structures of organic molecules, such as synthetic drugs, hormones and pesticides.
Preparation Method:
- 4-Fluorobenzylzinc chloride can be prepared by reacting 4-fluorobromobenzene and zinc chloride in an appropriate solvent.
Safety Information:
- 4-Fluorobenzylzinc chloride is irritating and should avoid contact with skin and eyes.
-During the operation, it should be carried out in a well-ventilated place to avoid inhalation or intake of compounds.
-During use or storage, care should be taken to prevent the generation of toxic gases and avoid contact with oxidants and strong acids.
Please note that when using or handling chemicals, you should strictly follow the laboratory safety operating procedures and use them under the guidance of laboratory consulting professionals.
Last Update:2024-04-09 15:18:01