6-ETHOXY-6-OXOHEXYLZINC BROMIDE, 0.5MSOL UTION IN TETRAHYDROFURAN
6-Ethoxy-6-oxohexylzinc bromide
CAS: 312693-01-9
Molecular Formula: C8H15BrO2Zn
6-ETHOXY-6-OXOHEXYLZINC BROMIDE, 0.5MSOL UTION IN TETRAHYDROFURAN - Names and Identifiers
6-ETHOXY-6-OXOHEXYLZINC BROMIDE, 0.5MSOL UTION IN TETRAHYDROFURAN - Physico-chemical Properties
| Molecular Formula | C8H15BrO2Zn |
| Molar Mass | 288.5 |
| Density | 0.98g/mLat 25°C |
| Flash Point | 1°F |
| Exposure Limit | ACGIH: TWA 50 ppm; STEL 100 ppm (Skin)OSHA: TWA 200 ppm(590 mg/m3)NIOSH: IDLH 2000 ppm; TWA 200 ppm(590 mg/m3); STEL 250 ppm(735 mg/m3) |
| Storage Condition | 2-8°C |
| Sensitive | Air Sensitive |
6-ETHOXY-6-OXOHEXYLZINC BROMIDE, 0.5MSOL UTION IN TETRAHYDROFURAN - Risk and Safety
| Risk Codes | R11 - Highly Flammable R14 - Reacts violently with water R19 - May form explosive peroxides R22 - Harmful if swallowed R36/37/38 - Irritating to eyes, respiratory system and skin. R40 - Limited evidence of a carcinogenic effect R36/37 - Irritating to eyes and respiratory system. |
| Safety Description | S16 - Keep away from sources of ignition. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S33 - Take precautionary measures against static discharges. S36 - Wear suitable protective clothing. S36/37 - Wear suitable protective clothing and gloves. |
| UN IDs | UN 2056 3/PG 2 |
| WGK Germany | 1 |
| Hazard Class | 4.3 |
6-ETHOXY-6-OXOHEXYLZINC BROMIDE, 0.5MSOL UTION IN TETRAHYDROFURAN - Introduction
6-Ethoxy-6-oxohexylzinc bromide is an organic zinc compound. Its molecular formula is C10H20BrO2Zn and its molecular weight is 314.43g/mol. The following is information about the properties, use, preparation and safety of the compound:
Nature:
- 6-Ethoxy-6-oxohexylzinc bromide is a colorless to pale yellow liquid with a pungent odor.
-Its density is 1.18 g/mL, boiling point is 160-170°C, and melting point is unknown.
-The compound is insoluble in water, but can be dissolved in organic solvents such as dimethylformamide (DMF) and dichloromethane.
Use:
- 6-Ethoxy-6-oxohexylzinc bromide is often used as a reagent in organic synthesis, especially in the reaction of building carbon-carbon bonds.
-It can be used to synthesize long-chain fatty alcohols, alkylation reagents and biologically active compounds.
Preparation Method:
The preparation of-6-Ethoxy-6-oxohexylzinc bromide is usually obtained by reacting zinc bromide with 6-ethoxy-6-oxohexyl bromide.
-The reaction conditions can be adjusted according to specific experimental requirements, and are generally carried out at low temperature.
Safety Information:
- 6-Ethoxy-6-oxohexylzinc bromide is an organometallic compound with certain toxicity. Pay attention to safety when using it.
-Wear protective glasses and gloves during operation and ensure good ventilation.
-Avoid contact with skin, eyes and respiratory tract.
-Keep away from fire and combustibles during use and storage.
-Waste disposal shall be carried out in accordance with local regulations. It is recommended that professional bodies be consulted on the treatment.
Nature:
- 6-Ethoxy-6-oxohexylzinc bromide is a colorless to pale yellow liquid with a pungent odor.
-Its density is 1.18 g/mL, boiling point is 160-170°C, and melting point is unknown.
-The compound is insoluble in water, but can be dissolved in organic solvents such as dimethylformamide (DMF) and dichloromethane.
Use:
- 6-Ethoxy-6-oxohexylzinc bromide is often used as a reagent in organic synthesis, especially in the reaction of building carbon-carbon bonds.
-It can be used to synthesize long-chain fatty alcohols, alkylation reagents and biologically active compounds.
Preparation Method:
The preparation of-6-Ethoxy-6-oxohexylzinc bromide is usually obtained by reacting zinc bromide with 6-ethoxy-6-oxohexyl bromide.
-The reaction conditions can be adjusted according to specific experimental requirements, and are generally carried out at low temperature.
Safety Information:
- 6-Ethoxy-6-oxohexylzinc bromide is an organometallic compound with certain toxicity. Pay attention to safety when using it.
-Wear protective glasses and gloves during operation and ensure good ventilation.
-Avoid contact with skin, eyes and respiratory tract.
-Keep away from fire and combustibles during use and storage.
-Waste disposal shall be carried out in accordance with local regulations. It is recommended that professional bodies be consulted on the treatment.
Last Update：2024-04-10 22:29:15
