6-QUINOLINYL TRIFLUOROMETHANESULFOTE
6-QUINOLINYL TRIFLUOROMETHANESULFONATE
CAS: 173089-80-0
Molecular Formula: C10H6F3NO3S
6-QUINOLINYL TRIFLUOROMETHANESULFOTE - Names and Identifiers
| Name | 6-QUINOLINYL TRIFLUOROMETHANESULFONATE |
| Synonyms | 6-Quinolinyl triflate 6-(Triflyloxy)quinoline 6-QUINOLINYL TRIFLUOROMETHANESULFOTE 6-QUINOLINYL TRIFLUOROMETHANESULFONATE Quinolin-6-yl trifluoromethanesulfonate trifluoromethanesulfonic acid 6-quinolinyl ester Methanesulfonic acid, 1,1,1-trifluoro-, 6-quinolinyl ester |
| CAS | 173089-80-0 |
| InChI | InChI=1/C10H6F3NO3S/c11-10(12,13)18(15,16)17-8-3-4-9-7(6-8)2-1-5-14-9/h1-6H |
6-QUINOLINYL TRIFLUOROMETHANESULFOTE - Physico-chemical Properties
| Molecular Formula | C10H6F3NO3S |
| Molar Mass | 277.22 |
| Density | 1.555±0.06 g/cm3(Predicted) |
| Melting Point | 34-38°C(lit.) |
| Boling Point | 354.7±42.0 °C(Predicted) |
| Flash Point | >230°F |
| Vapor Presure | 0mmHg at 25°C |
| pKa | 3.59±0.10(Predicted) |
| Storage Condition | Sealed in dry,Room Temperature |
| Refractive Index | 1.56 |
| Physical and Chemical Properties | WGK Germany:3 |
6-QUINOLINYL TRIFLUOROMETHANESULFOTE - Risk and Safety
| Hazard Symbols | T - Toxic |
| Risk Codes | R25 - Toxic if swallowed R36/38 - Irritating to eyes and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37 - Wear suitable protective clothing and gloves. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| UN IDs | UN 2811 6.1/PG 2 |
| WGK Germany | 3 |
6-QUINOLINYL TRIFLUOROMETHANESULFOTE - Introduction
6-QUINOLINYL TRIFLUOROMETHANESULFONATE, also known as TfO-6-quinolinyl ester, is an organic compound. The following is a description of its nature, use, formulation and safety information:
Nature:
6-QUINOLINYL TRIFLUOROMETHANESULFONATE is a colorless to light yellow liquid with high solubility. It has good solubility in water and some common organic solvents.
Use:
6-QUINOLINYL TRIFLUOROMETHANESULFONATE has a wide range of applications in the field of organic synthesis. It is often used as a ligand for strong acid catalysts, which can improve the reaction rate and yield. In addition, it can also be used in the synthesis of fumarates, acid-catalyzed condensation reactions, and other organic reactions that require acidic conditions.
Method:
The preparation of 6-QUINOLINYL TRIFLUOROMETHANESULFONATE is usually obtained by reacting trifluoromethanesulfonic acid with 6-quinoline ester. The specific method of synthesis may vary depending on laboratory conditions and requirements.
Safety Information:
6-QUINOLINYL TRIFLUOROMETHANESULFONATE is relatively safe under general conditions of use, but it still needs to comply with laboratory operating specifications. It is an irritant substance and may be irritating to the eyes, skin and respiratory system. Therefore, care should be taken to wear appropriate protective equipment such as gloves and goggles during use. At the same time, it should also be stored in a dry, well-ventilated place, away from fire and oxidants. In the case of accidental contact with skin or eyes, rinse immediately with plenty of water and seek medical help. Relevant safe operating procedures and procedures shall also be followed during handling and storage.
Nature:
6-QUINOLINYL TRIFLUOROMETHANESULFONATE is a colorless to light yellow liquid with high solubility. It has good solubility in water and some common organic solvents.
Use:
6-QUINOLINYL TRIFLUOROMETHANESULFONATE has a wide range of applications in the field of organic synthesis. It is often used as a ligand for strong acid catalysts, which can improve the reaction rate and yield. In addition, it can also be used in the synthesis of fumarates, acid-catalyzed condensation reactions, and other organic reactions that require acidic conditions.
Method:
The preparation of 6-QUINOLINYL TRIFLUOROMETHANESULFONATE is usually obtained by reacting trifluoromethanesulfonic acid with 6-quinoline ester. The specific method of synthesis may vary depending on laboratory conditions and requirements.
Safety Information:
6-QUINOLINYL TRIFLUOROMETHANESULFONATE is relatively safe under general conditions of use, but it still needs to comply with laboratory operating specifications. It is an irritant substance and may be irritating to the eyes, skin and respiratory system. Therefore, care should be taken to wear appropriate protective equipment such as gloves and goggles during use. At the same time, it should also be stored in a dry, well-ventilated place, away from fire and oxidants. In the case of accidental contact with skin or eyes, rinse immediately with plenty of water and seek medical help. Relevant safe operating procedures and procedures shall also be followed during handling and storage.
Last Update：2024-04-09 21:11:58
