9-bbn-nopol benzyl ether adduct, 0.5m in tetrahydrofuran solution - Names and Identifiers
9-bbn-nopol benzyl ether adduct, 0.5m in tetrahydrofuran solution - Physico-chemical Properties
Molecular Formula | C26H39BO
|
Molar Mass | 378.4 |
Density | 0.911g/mLat 25°C(lit.) |
Flash Point | 1°F |
9-bbn-nopol benzyl ether adduct, 0.5m in tetrahydrofuran solution - Risk and Safety
Risk Codes | R11 - Highly Flammable
R19 - May form explosive peroxides
R22 - Harmful if swallowed
R36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S16 - Keep away from sources of ignition.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S27 - Take off immediately all contaminated clothing.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
UN IDs | UN 1993 3/PG 2 |
WGK Germany | 3 |
Hazard Class | 3.1 |
Packing Group | II |
9-bbn-nopol benzyl ether adduct, 0.5m in tetrahydrofuran solution - Introduction
nb-enantrane (nb-enantrane) is a compound that has the following properties:
1. Structure: nb-enantrane is a bicyclic compound containing boron atoms, which is composed of two parts: nonane and nopol benzyl ether.
2. physical properties: nb-enantrane is a solid, yellow crystalline at room temperature. Its melting point and boiling point are high, and its solubility is poor.
3. chemical properties: nb-enantrane in the air stability, not easy to be oxidized. It can be thermally decomposed in an organic solvent.
The main use of nb-enantrane is as a reagent and catalyst in chemical synthesis. It can be used in various reactions in organic synthesis, such as reduction reaction, catalytic reaction and so on. Due to its special structure, nb-enantrane has high activity and selectivity in some specific chemical reactions.
The nb-enantrane preparation method can be achieved by chemical synthesis. A commonly used method is a heating reaction of nonane and nopol benzyl ether in an appropriate solvent, followed by isolation and purification to obtain the target product.
When using and handling nb-enantrane, you need to pay attention to the following safety information:
1. nb-enantrane should be operated in a well-ventilated laboratory environment, avoiding contact with skin, eyes and respiratory tract.
2. in the operation or storage of nb-enantrane, should avoid contact with strong oxidants and fire, in case of fire or explosion.
3. nb-enantrane may decompose at high temperatures to produce harmful gases, so excessive heating should be avoided.
4. When handling nb-enantrane waste, comply with local and national regulatory requirements.
Important note: The above information is for reference only. Please strictly abide by the safety guidelines and relevant regulations when using and handling the nb-enantrane.
Last Update:2024-04-09 21:21:28