AMMONIUM ZINC SULFATE HYDRATE
Ammonium zinc sulfate hydrate
CAS: 77998-33-5
Molecular Formula: H7NO5SZn
AMMONIUM ZINC SULFATE HYDRATE - Names and Identifiers
| Name | Ammonium zinc sulfate hydrate |
| Synonyms | Ammonium sulfate hydrate azanium,zinc,sulfate,hydrate Ammonium zinc sulfate hydrate AMMONIUM ZINC SULFATE HYDRATE |
| CAS | 77998-33-5 |
AMMONIUM ZINC SULFATE HYDRATE - Physico-chemical Properties
| Molecular Formula | H7NO5SZn |
| Molar Mass | 198.5 |
| Density | 1,931 g/cm3 |
| Physical and Chemical Properties | Colorless monoclinic crystal |
| Use | For pharmaceutical applications |
AMMONIUM ZINC SULFATE HYDRATE - Risk and Safety
| Risk Codes | R36/38 - Irritating to eyes and skin. R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S22 - Do not breathe dust. S25 - Avoid contact with eyes. S60 - This material and its container must be disposed of as hazardous waste. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN3077 |
| TSCA | Yes |
| Hazard Class | 9 |
| Packing Group | III |
AMMONIUM ZINC SULFATE HYDRATE - Introduction
Ammonium zinc sulfate hydrate(Ammonium zinc sulfate hydrate) is an inorganic compound with the chemical formula (NH4)2Zn(SO4)2 · xH2O, where x represents the degree of hydration. It is a white crystalline powder at room temperature.
Ammonium zinc sulfate hydrate is stable at room temperature, and will lose crystal water and decompose into ammonium sulfate and zinc sulfate above 80 ℃. It has high solubility in water and can be dissolved in hot water and sulfuric acid with appropriate concentration, but is insoluble in ethanol.
Ammonium zinc sulfate hydrate main uses include:
1. As an additive to the electroplating solution for galvanizing the metal surface.
2. for the preparation of other zinc compounds, such as zinc salt, anhydrous zinc sulfate, etc.
3. Used as a buffer to control the pH of the solution in the laboratory.
The preparation method of Ammonium zinc sulfate hydrate is usually obtained by reaction. A common preparation method is to heat and dissolve zinc sulfate and ammonium sulfate according to a specific ratio, and then cool and crystallize to obtain a Ammonium zinc sulfate hydrate.
About the safety information of Ammonium zinc sulfate hydrate, it is a kind of respirable dust, avoid contact with eyes and skin. Pay attention to personal protective measures during use to ensure good ventilation. At the same time, store in a dry, cool place, away from combustibles and oxidants. In case of any accident, it is still necessary to follow the relevant regulations on chemical leakage and disposal.
Ammonium zinc sulfate hydrate is stable at room temperature, and will lose crystal water and decompose into ammonium sulfate and zinc sulfate above 80 ℃. It has high solubility in water and can be dissolved in hot water and sulfuric acid with appropriate concentration, but is insoluble in ethanol.
Ammonium zinc sulfate hydrate main uses include:
1. As an additive to the electroplating solution for galvanizing the metal surface.
2. for the preparation of other zinc compounds, such as zinc salt, anhydrous zinc sulfate, etc.
3. Used as a buffer to control the pH of the solution in the laboratory.
The preparation method of Ammonium zinc sulfate hydrate is usually obtained by reaction. A common preparation method is to heat and dissolve zinc sulfate and ammonium sulfate according to a specific ratio, and then cool and crystallize to obtain a Ammonium zinc sulfate hydrate.
About the safety information of Ammonium zinc sulfate hydrate, it is a kind of respirable dust, avoid contact with eyes and skin. Pay attention to personal protective measures during use to ensure good ventilation. At the same time, store in a dry, cool place, away from combustibles and oxidants. In case of any accident, it is still necessary to follow the relevant regulations on chemical leakage and disposal.
Last Update：2024-04-10 22:29:15
