Aniline-13C6 hydrochloride
Aniline-13C6 hydrochloride
CAS: 89059-38-1
Molecular Formula: C6H8ClN
Aniline-13C6 hydrochloride - Names and Identifiers
| Name | Aniline-13C6 hydrochloride |
| Synonyms | Aniline-13C6 hydrochloride Aniline hydrochloride 13C6 Aniline-13C6 hydrochloride [U-Ring-13C6]-Aniline hydrochloride |
| CAS | 89059-38-1 |
Aniline-13C6 hydrochloride - Physico-chemical Properties
| Molecular Formula | C6H8ClN |
| Molar Mass | 135.64142 |
| Flash Point | 194°C |
| Solubility | DMSO |
| Appearance | Solid |
| Color | White |
| Storage Condition | 2-8°C |
Aniline-13C6 hydrochloride - Risk and Safety
| Risk Codes | R23/24/25 - Toxic by inhalation, in contact with skin and if swallowed. R40 - Limited evidence of a carcinogenic effect R41 - Risk of serious damage to eyes R43 - May cause sensitization by skin contact R48/23/24/25 - R50 - Very Toxic to aquatic organisms R68 - Possible risk of irreversible effects |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S27 - Take off immediately all contaminated clothing. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. S63 - |
| UN IDs | UN 1548 6.1/PG 3 |
| RTECS | CY0875000 |
Aniline-13C6 hydrochloride - Introduction
Aniline-13C6 hydrochloride is a chemical substance in which 6 hydrogen atoms in the benzene ring in its chemical structure are replaced by 13C isotopes, while forming the structure of hydrochloride with hydrochloric acid. The following is a description of some of the properties, uses, formulation and safety information of Aniline-13C6 hydrochloride:
Nature:
-Appearance: Aniline-13C6 hydrochloride common form is white crystalline powder.
-Solubility: Aniline-13C6 hydrochloride has a certain solubility in water.
Use:
-Marker: Aniline-13C6 hydrochloride is usually used as a marker in experiments such as mass spectrometry analysis, used to label compounds or study the dynamic changes of substances during the reaction.
Method:
The preparation of Aniline-13C6 hydrochloride is generally carried out by the following steps:
1. First, aniline is reacted with a compound labeled with 13C isotope to replace the hydrogen atom in the benzene ring with 13C isotope to obtain aniline -13C6.
2. Then, aniline -13C6 is reacted with hydrochloric acid to generate Aniline-13C6 hydrochloride.
Safety Information:
-use should pay attention to safety measures, avoid direct contact with the skin and inhalation.
-In case of contact with skin or eyes, rinse immediately with plenty of water.
-use process should pay attention to protective measures, such as wearing gloves, wear protective glasses.
-Avoid contact with oxidants and strong acids during storage to avoid dangerous chemical reactions.
-Use and storage should be away from flammable and high temperature environment.
It should be noted that the above information is for reference only. When using and handling chemical substances, please refer to specific chemical safety data and experimental operation guidelines, and follow relevant safety regulations and operation requirements.
Nature:
-Appearance: Aniline-13C6 hydrochloride common form is white crystalline powder.
-Solubility: Aniline-13C6 hydrochloride has a certain solubility in water.
Use:
-Marker: Aniline-13C6 hydrochloride is usually used as a marker in experiments such as mass spectrometry analysis, used to label compounds or study the dynamic changes of substances during the reaction.
Method:
The preparation of Aniline-13C6 hydrochloride is generally carried out by the following steps:
1. First, aniline is reacted with a compound labeled with 13C isotope to replace the hydrogen atom in the benzene ring with 13C isotope to obtain aniline -13C6.
2. Then, aniline -13C6 is reacted with hydrochloric acid to generate Aniline-13C6 hydrochloride.
Safety Information:
-use should pay attention to safety measures, avoid direct contact with the skin and inhalation.
-In case of contact with skin or eyes, rinse immediately with plenty of water.
-use process should pay attention to protective measures, such as wearing gloves, wear protective glasses.
-Avoid contact with oxidants and strong acids during storage to avoid dangerous chemical reactions.
-Use and storage should be away from flammable and high temperature environment.
It should be noted that the above information is for reference only. When using and handling chemical substances, please refer to specific chemical safety data and experimental operation guidelines, and follow relevant safety regulations and operation requirements.
Last Update：2024-04-09 21:01:54
Supplier List
Product Name: Aniline-13C6 hydrochloride Visit Supplier Webpage Request for quotation
CAS: 89059-38-1
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 89059-38-1
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: Aniline-13C6 hydrochloride Visit Supplier Webpage Request for quotation
CAS: 89059-38-1
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 89059-38-1
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History