BROMOXYNIL-METHYL ETHER - Names and Identifiers
BROMOXYNIL-METHYL ETHER - Physico-chemical Properties
Molecular Formula | C8H5Br2NO
|
Molar Mass | 290.94 |
Melting Point | 115-117°C |
Flash Point | 4°C |
Storage Condition | APPROX 4°C |
BROMOXYNIL-METHYL ETHER - Risk and Safety
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin.
R67 - Vapors may cause drowsiness and dizziness
R65 - Harmful: May cause lung damage if swallowed
R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R38 - Irritating to the skin
R11 - Highly Flammable
R43 - May cause sensitization by skin contact
R26 - Very Toxic by inhalation
R25 - Toxic if swallowed
R63 - Possible risk of harm to the unborn child
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S61 - Avoid release to the environment. Refer to special instructions / safety data sheets.
S60 - This material and its container must be disposed of as hazardous waste.
S33 - Take precautionary measures against static discharges.
S16 - Keep away from sources of ignition.
S63 -
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S36/37 - Wear suitable protective clothing and gloves.
S28 - After contact with skin, wash immediately with plenty of soap-suds.
S27 - Take off immediately all contaminated clothing.
|
UN IDs | UN1262 3/PG 2 |
BROMOXYNIL-METHYL ETHER - Introduction
3, is an organic compound with the chemical formula C9H6Br2NO. The following is a detailed description of its nature, use, preparation and safety information:
Nature:
-Appearance: Colorless crystalline solid
-Melting point: 82-84 ° C
-Boiling Point: 380-381 ° C
-Density: 1.86g/cm³
Use:
3. It is mainly used as an intermediate in organic synthesis and can be used as a precursor for drugs, pesticides and dyes. Its application in the field of medicine is mainly focused on the research and development of new drugs and the manufacture of active ingredients.
Preparation Method:
3, the preparation of fluorides is generally carried out by the following steps:
1. Add 4-methoxybenzonitrile to the solvent.
2. Add bromine to the solvent.
3. The reaction is carried out under appropriate conditions, such as controlling temperature and reaction time.
4. Filtration or crystallization to give the desired product.
Safety Information:
3, is a potentially toxic compound that is irritating to the eyes, skin and respiratory tract. When using or handling the compound, relevant safety practices should be observed, including wearing appropriate personal protective equipment, ensuring good ventilation and avoiding contact. At the same time, the compound must be stored and disposed of properly to prevent environmental pollution and harm to human health. When handling this compound, it is recommended to refer to the relevant safety data sheets and operating instructions.
Last Update:2024-04-09 21:11:58