Bis(trimethylsilyl)bisphenol A - monomer for substitution polymerization
N,N-bis(3-Trimethoxysilylpropyl)urea
CAS: 18418-53-6
Molecular Formula: C13H32N2O7Si2
Bis(trimethylsilyl)bisphenol A - monomer for substitution polymerization - Names and Identifiers
| Name | N,N-bis(3-Trimethoxysilylpropyl)urea |
| Synonyms | Bis(trimethylsilyl)bisphenol N,N-bis(3-Trimethoxysilylpropyl)urea 1,3-bis[3-(trimethoxysilyl)propyl]urea Urea, N,N'-bis[3-(trimethoxysilyl)propyl]- 18418-53-6 N,N-bis(3-Trimethoxysilylpropyl)urea Bis(trimethylsilyl)bisphenol A - monomer for substitution polymerization |
| CAS | 18418-53-6 |
| InChI | InChI=1/C13H32N2O7Si2/c1-17-23(18-2,19-3)11-7-9-14-13(16)15-10-8-12-24(20-4,21-5)22-6/h7-12H2,1-6H3,(H2,14,15,16) |
Bis(trimethylsilyl)bisphenol A - monomer for substitution polymerization - Physico-chemical Properties
| Molecular Formula | C13H32N2O7Si2 |
| Molar Mass | 384.57 |
| Density | 1.1 |
| Boling Point | 414.5±30.0 °C(Predicted) |
| Flash Point | >110°C (>230°F) |
| Vapor Presure | 4.44E-07mmHg at 25°C |
| Specific Gravity | 1.10 |
| pKa | 14.29±0.46(Predicted) |
| Sensitive | 7: reacts slowly with moisture/water |
| Refractive Index | 1.4488 |
Bis(trimethylsilyl)bisphenol A - monomer for substitution polymerization - Introduction
N,N-bis(3-Trimethoxysilylpropyl)urea is a urea compound containing a methoxysilyl-propyl substituent. The following is a description of the properties, uses, preparation and safety information of the compound:
Nature:
-Appearance: N,N-bis(3-Trimethoxysilylpropyl)urea is a colorless or pale yellow liquid.
-Solubility: Soluble in a variety of organic solvents, such as alcohols, ethers and chlorinated hydrocarbons.
-Melting point: No specific value provided.
-Stability: The compound is relatively stable at room temperature.
Use:
N,N-bis(3-Trimethoxysilylpropyl)urea is commonly used as a catalyst and crosslinking agent.
-Catalyst: This compound can be used as a catalyst in organic chemical reactions, such as condensation reactions, Cyclization Reactions, etc.
-Crosslinking agent: Due to the good crosslinking properties of the methoxysilyl group, N,N-bis(3-Trimethoxysilylpropyl)urea can be used for crosslinking modification of rubber, plastics and other materials.
Method:
N, the preparation method of N-bis(3-Trimethoxysilylpropyl)urea can be carried out by the following steps:
1. First, trimethoxysilyl propyl isocyanate is reacted with diisocyanate to generate N,N'-bis (3-trimethoxysilyl propyl) urea.
2. Then, the product was purified and crystallized to obtain the final N,N-bis (3-trimethoxylpropyl) urea product.
Safety Information:
Regarding N, the safety data of N-bis(3-Trimethoxysilylpropyl)urea is limited, so you need to be cautious during use.
-Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical help.
-Wear appropriate protective equipment such as gloves and goggles when using.
-When storing, the compound should be stored in a sealed container to avoid contact with fire and oxidizing agents.
-During use, please make sure to operate in a well-ventilated place and avoid inhaling its gas or steam.
Nature:
-Appearance: N,N-bis(3-Trimethoxysilylpropyl)urea is a colorless or pale yellow liquid.
-Solubility: Soluble in a variety of organic solvents, such as alcohols, ethers and chlorinated hydrocarbons.
-Melting point: No specific value provided.
-Stability: The compound is relatively stable at room temperature.
Use:
N,N-bis(3-Trimethoxysilylpropyl)urea is commonly used as a catalyst and crosslinking agent.
-Catalyst: This compound can be used as a catalyst in organic chemical reactions, such as condensation reactions, Cyclization Reactions, etc.
-Crosslinking agent: Due to the good crosslinking properties of the methoxysilyl group, N,N-bis(3-Trimethoxysilylpropyl)urea can be used for crosslinking modification of rubber, plastics and other materials.
Method:
N, the preparation method of N-bis(3-Trimethoxysilylpropyl)urea can be carried out by the following steps:
1. First, trimethoxysilyl propyl isocyanate is reacted with diisocyanate to generate N,N'-bis (3-trimethoxysilyl propyl) urea.
2. Then, the product was purified and crystallized to obtain the final N,N-bis (3-trimethoxylpropyl) urea product.
Safety Information:
Regarding N, the safety data of N-bis(3-Trimethoxysilylpropyl)urea is limited, so you need to be cautious during use.
-Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical help.
-Wear appropriate protective equipment such as gloves and goggles when using.
-When storing, the compound should be stored in a sealed container to avoid contact with fire and oxidizing agents.
-During use, please make sure to operate in a well-ventilated place and avoid inhaling its gas or steam.
Last Update：2024-04-09 21:54:55
Supplier List
Product Name: N,N-bis(3-Trimethoxysilylpropyl)urea Visit Supplier Webpage Request for quotation
CAS: 18418-53-6
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 18418-53-6
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: N,N-bis(3-Trimethoxysilylpropyl)urea Visit Supplier Webpage Request for quotation
CAS: 18418-53-6
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 18418-53-6
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History