Butanoic acid, 2-Methylene-, ethyl ester
ETHYL 2-ETHYLACRYLATE
CAS: 3070-65-3
Molecular Formula: C7H12O2
Butanoic acid, 2-Methylene-, ethyl ester - Names and Identifiers
| Name | ETHYL 2-ETHYLACRYLATE |
| Synonyms | ETHYL 2-ETHYLACRYLATE ETHYL 2-ETHYLACRYLATE 96 ethyl 2-Methylenebutyrate ETHYL 2-ETHYLACRYLATE 96 ethyl 2-methylenebutanoate Butanoic acid, 2-Methylene-, ethyl ester |
| CAS | 3070-65-3 |
| InChIKey | OUGJKAQEYOUGKG-UHFFFAOYSA-N |
Butanoic acid, 2-Methylene-, ethyl ester - Physico-chemical Properties
| Molecular Formula | C7H12O2 |
| Molar Mass | 128.17 |
| Density | 0.902 g/mL at 25 °C (lit.) |
| Boling Point | 139-145 °C (lit.) |
| Flash Point | 89°F |
| Storage Condition | 2-8°C |
| Refractive Index | n20/D 1.421(lit.) |
Butanoic acid, 2-Methylene-, ethyl ester - Risk and Safety
| Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin. R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R11 - Highly Flammable |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 - After contact with skin, wash immediately with plenty of soap-suds. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 1993 3/PG 3 |
| WGK Germany | 2 |
Butanoic acid, 2-Methylene-, ethyl ester - Upstream Downstream Industry
| Downstream Products | Ethyl 3-oxobutanoate sodium salt 2-ETHYLACRYLIC ACID 98 Ethyl tiglate |
Butanoic acid, 2-Methylene-, ethyl ester - Introduction
ETHYL 2-ETHYLACRYLATE, also known as ETHYL acetovinylate or vinyl acetate, is a colorless liquid with the chemical formula C7H12O2. The following is a description of the nature, use, preparation and safety information of ETHYL 2-ETHYLACRYLATE:
Nature:
-Appearance: colorless liquid
-Density: approx. 0.90g/cm³
-Boiling point: About 122-124 ° C
-Melting point: About -81 ° C
-Solubility: Soluble in many organic solvents such as alcohols, ethers and ketones
Use:
- ETHYL 2-ETHYLACRYLATE is widely used in the polymer industry to prepare polymers and resins. It can be used as a raw material for synthetic adhesives, coatings, plastics and rubbers.
-At the same time, it can also be used as a plasticizer, synergist and synthetic intermediate of other organic compounds in coatings.
Method:
ETHYL 2-ETHYLACRYLATE can be prepared by the following steps:
1. Acetic acid and chloroacetic acid react under alkaline conditions to generate ethyl 2-chloroacetate.
2. ETHYL 2-ETHYLACRYLATE is generated by Wittig reaction between ETHYL 2-chloroacetate and ethylene.
Safety Information:
- ETHYL 2-ETHYLACRYLATE is a flammable liquid, which may burn when exposed to open flame, high heat or oxidant, and should be stored away from the source of fire.
-Use with care to avoid contact with skin, eyes and mucous membranes. In case of contact, rinse immediately with plenty of water and seek medical help.
-During use, a good ventilation environment should be maintained and combustible gas and steam should be avoided.
-storage should avoid contact with oxidants, nitric acid, alkali and other harmful substances.
Nature:
-Appearance: colorless liquid
-Density: approx. 0.90g/cm³
-Boiling point: About 122-124 ° C
-Melting point: About -81 ° C
-Solubility: Soluble in many organic solvents such as alcohols, ethers and ketones
Use:
- ETHYL 2-ETHYLACRYLATE is widely used in the polymer industry to prepare polymers and resins. It can be used as a raw material for synthetic adhesives, coatings, plastics and rubbers.
-At the same time, it can also be used as a plasticizer, synergist and synthetic intermediate of other organic compounds in coatings.
Method:
ETHYL 2-ETHYLACRYLATE can be prepared by the following steps:
1. Acetic acid and chloroacetic acid react under alkaline conditions to generate ethyl 2-chloroacetate.
2. ETHYL 2-ETHYLACRYLATE is generated by Wittig reaction between ETHYL 2-chloroacetate and ethylene.
Safety Information:
- ETHYL 2-ETHYLACRYLATE is a flammable liquid, which may burn when exposed to open flame, high heat or oxidant, and should be stored away from the source of fire.
-Use with care to avoid contact with skin, eyes and mucous membranes. In case of contact, rinse immediately with plenty of water and seek medical help.
-During use, a good ventilation environment should be maintained and combustible gas and steam should be avoided.
-storage should avoid contact with oxidants, nitric acid, alkali and other harmful substances.
Last Update：2024-04-10 22:29:15
Supplier List
View History
Downstream Products for Butanoic acid, 2-Methylene-, ethyl ester