Name | cyclohexanone peroxide |
Synonyms | Cyclohexanone peroxi CYCLOHEXANONE PEROXIDE cyclohexanone peroxide Cyclohexanone peroxide solution 1-Hydroperoxycyclohexyl-1-hydroxycyclohexyl peroxide (1R,2S,3r,4R,5S,6r)-1,2,3,4,5,6-hexachlorocyclohexane 1-HYDROPEROXYCYCLOHEXYL-1-HYDROXY CYCLOHEXYL PEROXIDE 1-Hydroperoxycyclohexyl-1-hydroxycyclohexyl peroxide 12262-58-7 |
CAS | 12262-58-7 |
EINECS | 235-527-7 |
InChI | InChI=1/C6H6Cl6/c7-1-2(8)4(10)6(12)5(11)3(1)9/h1-6H/t1-,2-,3-,4+,5+,6+ |
Molecular Formula | C12H22O5 |
Molar Mass | 246.3 |
Density | 1.15[at 20℃] |
Melting Point | 65-70 °C |
Boling Point | 287.999°C at 760 mmHg |
Flash Point | 157.495°C |
Water Solubility | 9.3g/L at 25℃ |
Vapor Presure | 2.16Pa at 25℃ |
Refractive Index | 1.533 |
Use | Used as a curing agent for hand-laid FRP products, cast and coated products |
Risk Codes | R60 - May impair fertility R61 - May cause harm to the unborn child R3 - Extreme risk of explosion by shock, friction, fire or other sources of ignition R7 - May cause fire R22 - Harmful if swallowed R34 - Causes burns |
Safety Description | S53 - Avoid exposure - obtain special instructions before use. S3/7 - S14 - Keep away from ... (a list of incompatible materials will follow). S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S35 - This material and its container must be disposed of in a safe way. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
UN IDs | UN 2117/2118/2119/2896 |
Raw Materials | Hydrogen peroxide Cyclohexanone Dimethyl phthalate |
LogP | 1.2 at 29℃ |
EPA chemical substance information | information provided by: ofmpeb.epa.gov (external link) |
Introduction | cyclohexanone peroxide, white or light yellow needle crystal or powder, soluble in alcohol, benzene, acetic acid, petroleum ether, acetone, insoluble in water, with strong oxidation. It is mainly used as a crosslinking agent and an initiator for the synthesis of rubber and plastics. |
Application | used as a curing agent for hand-laid FRP products, cast and coated articles synthetic crosslinking agents and initiators for rubber and plastics. |
production method | 1.196.3G of cyclohexanone and 30% of hydrogen peroxide were respectively cooled to below 10 °c, and the hydrogen peroxide was added to cyclohexanone under stirring, and the feed temperature was controlled to be ≤ 15 °c. Add 24ml 2mol/L hydrochloric acid at 15 ℃, control the temperature not to exceed 30 ℃, gradually solidify the material, and stir constantly to avoid caking. Add 400ml distilled water, wash and suction filter, filter cake is washed with distilled water 2~3 times, with distilled water 400ml to paste, add 10% NaOK to pH 8, suction filter, water, it was dried by pressing and air-dried to obtain cyclohexanone peroxide. 2. Preparation Method: Add freshly distilled cyclohexanone (2)980G (10mol) into enamel basin, cool to below 5 ℃ in ice bath, 28% L(10mol) of 1.2 hydrogen peroxide cooled to below 5 °c was added with stirring, and the reaction was exothermic and raised to 40 °c. After cooling to below 15 ℃, there may be crystallization. 200ml of 2mol/L hydrochloric acid was added slowly with stirring, and the reaction exothermic temperature was raised to about 30 °c. Cooling with stirring, Suction filtration, washing 2 times with 2L distilled water, then stirring into slurry with 2L water, neutralizing to pH 6 with 4% sodium hydroxide, Suction filtration, washing 2 times, air drying, compound (1) was obtained in an amount of 1.05-1.1, mp77 -79 °c, and a yield of 85%-89%. [1] |