Decanedioic acid, ditridecyl ester
ditridecyl sebacate
CAS: 2741-62-0
Molecular Formula: C36H70O4
Decanedioic acid, ditridecyl ester - Names and Identifiers
| Name | ditridecyl sebacate |
| Synonyms | ditridecyl sebacate DITRIDECYL DECANEDIOATE Sebacic acid ditridecyl ester Decanedioic acid, ditridecyl ester |
| CAS | 2741-62-0 |
| EINECS | 220-373-5 |
Decanedioic acid, ditridecyl ester - Physico-chemical Properties
| Molecular Formula | C36H70O4 |
| Molar Mass | 566.95 |
Decanedioic acid, ditridecyl ester - Introduction
Ditridecyl sebacate (also known as DTS) is an important ester compound. Its chemical formula is C30H58O4 and its molecular weight is about 482.78g/mol. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: Colorless to light yellow oily liquid.
-Melting point: approximately -32°C.
-Boiling point: about 370 ℃.
-Relative density: about 0.92-0.94g/cm³.
-solubility: miscible with a variety of organic solvents.
Use:
-Plasticizer: DTS is commonly used as a plasticizer to increase the flexibility, workability and cold resistance of plastics.
-Lubricants: Due to its excellent lubricating properties, DTS is also widely used in lubricants, metal processing lubricants and other fields.
-Light stabilizer: It can be used in various polymers and coatings to improve its resistance to UV degradation.
Method:
The preparation method of DTS is usually obtained by esterification of stearic acid (tridecanoic acid) and adipic acid (sebacic acid). The reaction may be carried out under acid-catalyzed conditions and using a suitable solvent and catalyst.
Safety Information:
- DTS is considered to be a relatively safe compound under normal use conditions.
-Eye contact: In case of eye contact, immediately rinse with plenty of water for at least 15 minutes and seek medical advice if necessary.
-Skin contact: In case of skin contact, wash thoroughly with soap and water immediately. If skin irritation or discomfort occurs, seek medical advice.
-Inhalation: If you inhale too much aerosol or gas, please quickly move to a well-ventilated place, rest and keep warm. If breathing difficulties persist, please seek medical attention immediately.
-Ingestion: Do not induce vomiting if ingestion occurs. Seek medical attention immediately.
Please note that the above content is for reference only. Please follow the relevant safety operation specifications when using and handling DTS, and refer to specific technical and safety materials.
Nature:
-Appearance: Colorless to light yellow oily liquid.
-Melting point: approximately -32°C.
-Boiling point: about 370 ℃.
-Relative density: about 0.92-0.94g/cm³.
-solubility: miscible with a variety of organic solvents.
Use:
-Plasticizer: DTS is commonly used as a plasticizer to increase the flexibility, workability and cold resistance of plastics.
-Lubricants: Due to its excellent lubricating properties, DTS is also widely used in lubricants, metal processing lubricants and other fields.
-Light stabilizer: It can be used in various polymers and coatings to improve its resistance to UV degradation.
Method:
The preparation method of DTS is usually obtained by esterification of stearic acid (tridecanoic acid) and adipic acid (sebacic acid). The reaction may be carried out under acid-catalyzed conditions and using a suitable solvent and catalyst.
Safety Information:
- DTS is considered to be a relatively safe compound under normal use conditions.
-Eye contact: In case of eye contact, immediately rinse with plenty of water for at least 15 minutes and seek medical advice if necessary.
-Skin contact: In case of skin contact, wash thoroughly with soap and water immediately. If skin irritation or discomfort occurs, seek medical advice.
-Inhalation: If you inhale too much aerosol or gas, please quickly move to a well-ventilated place, rest and keep warm. If breathing difficulties persist, please seek medical attention immediately.
-Ingestion: Do not induce vomiting if ingestion occurs. Seek medical attention immediately.
Please note that the above content is for reference only. Please follow the relevant safety operation specifications when using and handling DTS, and refer to specific technical and safety materials.
Last Update：2024-04-10 22:29:15
