Dichloro(1,1-bis(diphenylphosphino)ferrocene)palladiuM(II) aceto
[1,1'-Bis(diphenylphosphino)ferrocene]palladium(II) chloride acetone adduct
CAS: 851232-71-8
Molecular Formula: 2C17H14P.CH2Cl2.Cl2Pd.Fe
Dichloro(1,1-bis(diphenylphosphino)ferrocene)palladiuM(II) aceto - Names and Identifiers
| Name | [1,1'-Bis(diphenylphosphino)ferrocene]palladium(II) chloride acetone adduct |
| Synonyms | Dichloro(1,1-bis(diphenylphosphino)ferrocene)palladiuM(II) aceto dichloro(1,1-bis(diphenylphosphino)ferrocene)palladium(ii) acetone adduct Dichloro(1,1-bis(diphenylphosphino)ferrocene)palladium(II) acetone adduct [1,1'-Bis(diphenylphosphino)ferrocene]palladium(II) chloride acetone adduct 1,1-Bis(diphenylphosphino)ferrocene palladium(II) dichloride acetone adduct [1,1'-Bis(diphenylphosphino)ferrocene]palladium(II) chloride acetone adduct [1,1'-Bis(diphenylphosphino)ferrocene]palladium(Ⅱ) chloride, complex with acetone |
| CAS | 851232-71-8 |
Dichloro(1,1-bis(diphenylphosphino)ferrocene)palladiuM(II) aceto - Physico-chemical Properties
| Molecular Formula | 2C17H14P.CH2Cl2.Cl2Pd.Fe |
| Molar Mass | 816.647 |
| Melting Point | 280℃ |
| Storage Condition | 2-8℃ |
| Sensitive | Air sensitive |
| MDL | MFCD00792899 |
Dichloro(1,1-bis(diphenylphosphino)ferrocene)palladiuM(II) aceto - Risk and Safety
| Hazard Symbols | Xn - Harmful |
| HS Code | 28439000 |
Dichloro(1,1-bis(diphenylphosphino)ferrocene)palladiuM(II) aceto - Introduction
[1,1 '-Bis(diphenylphosphino)ferrocene]palladium(II) chloride acetone adduct belongs to the coordination compound, the chemical formula is [PdCl(κ2-dppf)]· CH3COCH3. where [PdCl(κ2-dppf)] denotes a palladium (II) chloride complex with 1,1 ′-bis (biphenylphosphino) ferrocene (commonly referred to as dppf) in coordination with palladium and forms a coordinate bond with palladium through a chlorine atom, CH3COCH3 denotes an acetone solvent molecule.
The compound has the following properties:
1. appearance: usually orange crystal or powder.
2. Solubility: Soluble in polar solvents such as methanol, dimethylformamide (DMF) and dichloromethane.
3. stability: stable in the air, but need to avoid light preservation to prevent decomposition.
4. Melting point: about 220-225°C.
The main use of this compound is as a catalyst and is often used in organic synthesis reactions.
The method for preparing the compound is as follows:
First, palladium (II) chloride is reacted with 1,1 '-bis (biphenylphosphino) ferrocene in a suitable solvent, usually dichloromethane or chloroform. Under appropriate conditions, the resulting compound can be purified by crystallization to give a single crystal or powder form.
As far as safety information is concerned, the specific toxicity and harmfulness of this compound have not been widely reported. However, like most metal catalysts, it can be hazardous to the environment and health. During operation, appropriate safety measures such as gloves, goggles and laboratory ventilation should be taken to avoid contact with skin, eyes or inhalation of vapors. Always follow the instructions in the operating manual and chemical safety data sheet. If you need further safety information about this compound, please consult the relevant safety data sheet.
The compound has the following properties:
1. appearance: usually orange crystal or powder.
2. Solubility: Soluble in polar solvents such as methanol, dimethylformamide (DMF) and dichloromethane.
3. stability: stable in the air, but need to avoid light preservation to prevent decomposition.
4. Melting point: about 220-225°C.
The main use of this compound is as a catalyst and is often used in organic synthesis reactions.
The method for preparing the compound is as follows:
First, palladium (II) chloride is reacted with 1,1 '-bis (biphenylphosphino) ferrocene in a suitable solvent, usually dichloromethane or chloroform. Under appropriate conditions, the resulting compound can be purified by crystallization to give a single crystal or powder form.
As far as safety information is concerned, the specific toxicity and harmfulness of this compound have not been widely reported. However, like most metal catalysts, it can be hazardous to the environment and health. During operation, appropriate safety measures such as gloves, goggles and laboratory ventilation should be taken to avoid contact with skin, eyes or inhalation of vapors. Always follow the instructions in the operating manual and chemical safety data sheet. If you need further safety information about this compound, please consult the relevant safety data sheet.
Last Update：2024-04-10 22:29:15
Supplier List
Product Name: [1,1-Bis(Diphenylphosphino)Ferrocene]Palladium(II) Chloride, Complex With Acetone, Pd Visit Supplier Webpage Request for quotation
CAS: 851232-71-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 851232-71-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: [1,1-Bis(Diphenylphosphino)Ferrocene]Palladium(II) Chloride, Complex With Acetone, Pd Visit Supplier Webpage Request for quotation
CAS: 851232-71-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 851232-71-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History