Molecular Formula | C19H22ClNO |
Molar Mass | 315.84 |
Melting Point | 187-189°C |
Boling Point | 413.3°C at 760 mmHg |
Flash Point | 9℃ |
Water Solubility | Soluble in water (100 mM), chloroform (1:2), alcohol (1:1), methanol, and DMSO. |
Solubility | 1 M HCl: 50mg/mL |
Vapor Presure | 4.87E-07mmHg at 25°C |
Appearance | White to off-white powder |
Color | white to off-white |
Maximum wavelength(λmax) | ['298nm(lit.)'] |
Merck | 14,3435 |
Storage Condition | 2-8°C |
Stability | Store in Freezer at -20°C |
Use | This product is for scientific research only and shall not be used for other purposes. |
In vitro study | Doxepin inhibits the reuptake of serotonin and norepinephrine. It has negligible reuptake of dopamine. Doxepin has an antagonistic effect on various receptors, including H1,H2,5-HT1,5-HT2, α1-adrenergic, and mACh. |
Risk Codes | R25 - Toxic if swallowed R39/23/24/25 - R23/24/25 - Toxic by inhalation, in contact with skin and if swallowed. R11 - Highly Flammable |
Safety Description | S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S36/37 - Wear suitable protective clothing and gloves. S16 - Keep away from sources of ignition. |
UN IDs | UN 2811 6.1/PG 3 |
WGK Germany | 3 |
RTECS | HQ4375000 |
HS Code | 29329990 |
Hazard Class | 6.1(b) |
Packing Group | III |
Toxicity | LD50 oral in rat: 147mg/kg |
Reference Show more | 1. [IF=5.909] Xi He et al."One-pot synthesis of C-doping and defects co-modified g-C3N4 for enhanced visible-light photocatalytic degradation of bisphenol A."J Environ Chem Eng. 2021 Dec;:106911 |
This product is a cis-trans isomer mixture of N, n-dimethyl-3-dibenzo [6,e] oxaphene-11 (6h) subunit-1-propylamine hydrochloride. The content of C19H21NO. HC1 shall be between 98.0% and 102.0% based on the dry product.
The melting point of this product (General rule 0612 first method) is 185~191°C.
take 0.10g of this product, Add 10ml of water to dissolve, and measure according to law (General rule 0631). The pH value should be 4.5~6.5.
take this product, add mobile phase to dissolve and dilute to make each lml containing l. 0 mg of the solution, as the test solution; Take 2ml of precision, put in a 100ml measuring flask, dilute to the scale with mobile phase, shake, Take 5ml of precision, put in a 50ml measuring flask, dilute to the scale with the mobile phase, shake, and serve as a control solution. According to the chromatographic conditions under the content determination item, 20ul of the control solution and the test solution are respectively injected into the liquid chromatograph, and the chromatogram is recorded to 2 times of the retention time of the main component peak. If there are impurity peaks in the chromatogram of the test solution, the area of a single impurity peak shall not be greater than the sum of the two main peaks of doxepin in the control solution (0.2% ) , the sum of each impurity peak area shall not be greater than 2.5 times (0.5%) of the sum of the two main peak areas of doxepin in the control solution.
According to the determination method under the content determination item, the cis isomer (Z) contained in the sample shall be 17.0% ~ 23.0% calculated by the peak area according to the external standard method.
take this product, dry to constant weight at 105°C, weight loss shall not exceed 1.0% (General rule 0831).
take l.Og of this product and check it according to law (General rule 0841). The residue left shall not exceed 0.1%.
The residue left under the item of taking the ignition residue shall not contain more than 20 parts per million of heavy metal when examined by law (General rule 0821, Law II).
measured by high performance liquid chromatography (General 0512).
silica gel bonded with octylsilane as filler; 0.1% mol/L sodium dihydrogen phosphate solution-methanol (65:35) containing 0.2 triethylamine (adjusted to pH 2.5 with 2mol/L phosphoric acid) mobile phase; Detection wavelength was 254nm; Column temperature was 50°C. The theoretical plate number is not less than 1500 based on the cis isomer (Z), and the resolution of the trans isomer (E) and the cis isomer (Z) peaks should meet the requirements.
take this product, precision weighing, plus mobile phase dissolution and dilution made in each lml containing about 0. The solution of lmg was accurately measured and 20m1 was injected into the human liquid chromatograph, and the chromatogram was recorded. The reference substance of doxepin hydrochloride was taken and determined by the same method. According to the external standard method to doxepin two peak area and calculation, that is obtained.
antidepressants.
light shielding, sealed storage.
This product contains doxepin hydrochloride calculated as doxepin (C19H21NO), which should be 90.0% ~ 110.0% of the labeled amount.
This product is sugar-coated tablet or film-coated tablet, white to yellowish after removing the coating.
Take 20 tablets of this product, remove the coating, precision weighing, fine grinding, precision weighing an appropriate amount (about 50mg equivalent to doxepin), put it in a 100ml measuring flask, add appropriate amount of mobile phase and ultrasound to dissolve doxepin hydrochloride and dilute to the scale, shake well, filter, take 10ml of continuous filtrate accurately, put it in 50ml measuring flask, add mobile phase to dissolve and dilute to the scale, as a test solution. The results were obtained by multiplying the results by 0.8846 as determined under determination of doxepin hydrochloride.
Same as doxepin hydrochloride.
25mg (based on C19H21NO)
light shielding, sealed storage.