ChemBK
  • Home
  • Product Category


Reactive Green Blue K-GL

Reactive Blue 14

CAS: 12236-85-0

Molecular Formula:

  1. Home
  2. Product Category
  3. Dyes and pigments
  4. Pigment
  5. Reactive Green Blue K-GL

Reactive Green Blue K-GL - Names and Identifiers

Name Reactive Blue 14
Synonyms Reactive Blue 14
Turqoise Blue K-GR
C.I.Reactive Blue 14
Reactive Green Blue K-GL
Reactive Blue Green K-GL
Reactive Turq. Blue K-GL
Reactive Emerald Blue K-GL
Reactive Brilliant Blue K-GL
Cibacron Brilliant Blue FC-4GP
CAS 12236-85-0

Reactive Green Blue K-GL - Physico-chemical Properties

Physical and Chemical PropertiesLake blue powder. The solubility in water (50 °c) was 130g/L. The aqueous solution was blue, and the color remained unchanged after adding 1mol/L sodium hydroxide, followed by adding sodium hydrosulfite and warming, turning purple, adding sodium perborate to return to light blue. It is green in concentrated sulfuric acid and blue after dilution; Bright blue in concentrated nitric acid and light blue after dilution.

Reactive Green Blue K-GL - Reference Information

Brief introduction Reactive blue 14 is also called reactive green blue K-GL, gray-blue powder. The aqueous solution was a lake-blue solution. It is green in concentrated sulfuric acid, and turns blue after dilution. It is obtained by condensation of aniline 2, 5-bissulfonic acid with cyanuric chloride, condensation with ethylenediamine, and finally condensation with chlorosulfonated copper titanium cyanine for the third time.
Use reactive Alexandrite K-GL is suitable for pad dyeing cotton with low affinity. In addition to a single color, it can also be combined with a reactive yellow dye to dye Green. It is also suitable for direct, anti-dyeing and discharge printing of cotton fabric, direct printing of cotton fabric and two-bath dyeing of polyester cotton fabric.
It is mainly used for cotton and silk fabric printing, not for viscose fiber
production method with copper phthalocyanine blue, aniline -2, 5-disulfonic acid, cyanuric chloride, ethylenediamine, chlorosulfonic acid as the main raw material, the first condensation of cyanuric chloride with aniline -2, 5-disulfonic acid, and then the second condensation with ethylenediamine; then, the product obtained by reacting copper phthalocyanine blue with chlorosulfonic acid is refined, and then subjected to a third condensation with the above-mentioned two-time condensation product, followed by salting out, filtration and drying to obtain a finished product.. 342kg chlorosulfonic acid (95%) and 60.5kg copper phthalocyanine blue (95%) were added to the reaction pot, heated to 130 °c ± 2 °c, kept for 4H, then cooled to 65 °c, stable for 2H. Then add 95kg thionyl chloride (100%) Dropwise, add the end of heating to 65-70 deg C, heat preservation 30min after heating to 90 deg C, heat preservation 30min, then rise to 100-105 deg C, heat preservation 30min. Dilute with ice water and filter to get filter cake. 45.2kg of aniline -2, 5-disulfonic acid (100%) was reacted with 35kg of cyanuric chloride (industrial product) at pH = 6-6.5, 5-10 °c for about 8H, and filtered to obtain the first condensation product. The first condensation product was reacted with 9.7kg of ethylenediamine (100 °c) at 30-35 °c for 6h to give a second condensation product. In the third condensation pot first add 400L ice water, 0 ℃, add all the chlorosulfonated filter cake, beating 20min, slowly add 10-20kg of sodium bicarbonate (Industrial), adjust pH = 6-7, several times to add ammonia (about 22L), heated to 15-20 ° C., 1H. The second condensation product was then added, warmed to 30-35 °c, added dropwise with 10% sodium hydroxide solution, adjusted to pH = 9-10, and incubated for 4H, then with 18% hydrochloric acid (about 10-30kg). pH = 6.5-7 was adjusted. Finally, 25%-30% of the volume of the reaction mass is added to the refined salt for salting out, and the product is filtered. After drying, grinding, and mixing with the powder, it is the finished product.
Last Update:2024-04-09 21:04:16
Supplier List
SKYRUN INDUSTRIAL CO.,LTD
Spot supply
Product Name: Reactive turquoise blue K-GL Visit Supplier Webpage Request for quotation
CAS: 12236-85-0
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
SKYRUN INDUSTRIAL CO.,LTD
Spot supply
Product Name: Reactive turquoise blue K-GL Visit Supplier Webpage Request for quotation
CAS: 12236-85-0
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
View History
Reactive Green Blue K-GL
P-ISOPROPYLHEXAHYDROBENZOIC ACID
CIS- AND TRANS-L-MERCAPTO-P-MENTHAN-3-ONE
irtran1
Senecioic acid citronellyl ester
2-二叔丁基膦-1-苯基吲哚
5-METHYLISOXAZOLE-3-CARBONYL CHLORIDE
非诺贝特酸杂质F
彩钢板清洗剂
H-D-2-AMINOCAPROIC ACID
  • Home
  • Product Category

© 2015, 2023 ChemBK.com All Rights Reserved | Build: 20230617001