S-2,2,2-TRIFLUORO-1-(METHYL)ETHYLAMINE HYDROCHLORIDE
(S)-1,1,1-TRIFLUOROISOPROPYLAMINE HYDROCHLORIDE
CAS: 125353-44-8
Molecular Formula: C3H7ClF3N
S-2,2,2-TRIFLUORO-1-(METHYL)ETHYLAMINE HYDROCHLORIDE - Names and Identifiers
S-2,2,2-TRIFLUORO-1-(METHYL)ETHYLAMINE HYDROCHLORIDE - Physico-chemical Properties
| Molecular Formula | C3H7ClF3N |
| Molar Mass | 149.54 |
| Boling Point | 116°C at 760 mmHg |
| Flash Point | 23.9°C |
| Vapor Presure | 17.1mmHg at 25°C |
| Storage Condition | under inert gas (nitrogen or Argon) at 2-8°C |
S-2,2,2-TRIFLUORO-1-(METHYL)ETHYLAMINE HYDROCHLORIDE - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. |
| Hazard Note | Irritant |
S-2,2,2-TRIFLUORO-1-(METHYL)ETHYLAMINE HYDROCHLORIDE - Introduction
(S)-1,1, 1-trifluoroisopropylamine hydrochloride (also known as Trifluoroisopropylamine hydrochloride) is an organic compound. Its chemical formula is C3H7F3N · HCl.
The properties of the compound are as follows:
-Appearance: colorless crystalline solid;
-Melting point: about 70-80 degrees Celsius;
-Boiling point: about 148-150 degrees Celsius;
-Density: about 1.32g/cm3;
-Solubility: Soluble in water and some organic solvents.
(S)-1,1, 1-trifluoroisopropylamine hydrochloride has a wide range of uses in organic synthesis, including as a catalyst, ligand or intermediate. It is widely used in synthetic drugs, fine chemicals and pesticide industries.
The compound can be obtained by the following preparation method:
(S)-1,1, 1-trifluoroisopropylamine reacts with hydrochloric acid to produce (S)-1,1, 1-trifluoroisopropylamine hydrochloride. In particular, hydrochloric acid solution may be added dropwise to a cooled mixture of (S)-1,1, 1-trifluoroisopropylamine, followed by washing with dilute hydrochloric acid and purification by crystallization.
Regarding safety information, you need to pay attention to the following points:
-The compound may cause irritation to the eyes, skin and respiratory system, so care should be taken to wear appropriate protective equipment, such as gloves, protective glasses and protective masks;
-Avoid inhaling the dust or gas of the compound, and operate in a well-ventilated place;
-Keep away from heat and fire sources during storage and handling to reduce the risk of fire or explosion;
-If you come into contact with this compound, rinse immediately with plenty of water and seek medical help.
Please note that when using chemicals, follow safety procedures and refer to the safety data sheet (SDS) of the chemical for detailed safety information.
The properties of the compound are as follows:
-Appearance: colorless crystalline solid;
-Melting point: about 70-80 degrees Celsius;
-Boiling point: about 148-150 degrees Celsius;
-Density: about 1.32g/cm3;
-Solubility: Soluble in water and some organic solvents.
(S)-1,1, 1-trifluoroisopropylamine hydrochloride has a wide range of uses in organic synthesis, including as a catalyst, ligand or intermediate. It is widely used in synthetic drugs, fine chemicals and pesticide industries.
The compound can be obtained by the following preparation method:
(S)-1,1, 1-trifluoroisopropylamine reacts with hydrochloric acid to produce (S)-1,1, 1-trifluoroisopropylamine hydrochloride. In particular, hydrochloric acid solution may be added dropwise to a cooled mixture of (S)-1,1, 1-trifluoroisopropylamine, followed by washing with dilute hydrochloric acid and purification by crystallization.
Regarding safety information, you need to pay attention to the following points:
-The compound may cause irritation to the eyes, skin and respiratory system, so care should be taken to wear appropriate protective equipment, such as gloves, protective glasses and protective masks;
-Avoid inhaling the dust or gas of the compound, and operate in a well-ventilated place;
-Keep away from heat and fire sources during storage and handling to reduce the risk of fire or explosion;
-If you come into contact with this compound, rinse immediately with plenty of water and seek medical help.
Please note that when using chemicals, follow safety procedures and refer to the safety data sheet (SDS) of the chemical for detailed safety information.
Last Update：2024-04-09 20:49:11
Supplier List
Product Name: (S)-2-Amino-1,1,1-trifluoropropane hydrochloride Request for quotation
CAS: 125353-44-8
Tel: 0086-13605431940
Email: xuli678323@126.com
Mobile: +86-13605431940
QQ: 56860987
Wechat: 13605431940
WhatsApp: 13605431940
CAS: 125353-44-8
Tel: 0086-13605431940
Email: xuli678323@126.com
Mobile: +86-13605431940
QQ: 56860987
Wechat: 13605431940
WhatsApp: 13605431940
Product Name: (S)-2-Amino-1,1,1-trifluoropropane hydrochloride Request for quotation
CAS: 125353-44-8
Tel: 0086-13605431940
Email: xuli678323@126.com
Mobile: +86-13605431940
QQ: 56860987
Wechat: 13605431940
WhatsApp: 13605431940
CAS: 125353-44-8
Tel: 0086-13605431940
Email: xuli678323@126.com
Mobile: +86-13605431940
QQ: 56860987
Wechat: 13605431940
WhatsApp: 13605431940
View History