SILICA, IMPAQ RG 1080 C8
ZORBAX LP 100/40 C4
CAS: 68584-80-5
Molecular Formula: C10H23ClO2Si2
SILICA, IMPAQ RG 1080 C8 - Names and Identifiers
SILICA, IMPAQ RG 1080 C8 - Physico-chemical Properties
| Molecular Formula | C10H23ClO2Si2 |
| Molar Mass | 266.91242 |
SILICA, IMPAQ RG 1080 C8 - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36 - Irritating to the eyes |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. |
| WGK Germany | 3 |
SILICA, IMPAQ RG 1080 C8 - Introduction
Chlorodimethylbutylsilane is a colorless liquid with a pungent odor. Its hydrolysis products are dimethylsilyl and dichlorobutane. Dimethylsilyl alcohol is a colorless liquid that can be oxidized by oxygen and water to form silica. Dichlorobutane is a colorless liquid with a pungent odor. Silica is a colorless powdery solid.
The main purpose of monochlorodimethylbutylsilane is as a crosslinking agent for silicone rubber, which can improve the heat resistance and chemical resistance of rubber. It can also be used to manufacture sealing materials, waterproof coatings, synthetic resins, etc.
The production method of monochlorodimethylbutylsilane can be obtained by reacting dimethyldichlorosilane with butyllithium, or by reacting trichlorosilane with butyllithium and copper oxide.
Chlorodimethylbutylsilane has certain safety risks. It is irritating to skin and eyes and may cause allergic reactions. Avoid direct contact during operation and wear protective gloves, goggles and gas masks if necessary. At the same time, it should be operated in a well-ventilated environment to avoid inhaling its vapor. In the event of an accident, appropriate emergency measures should be taken immediately and professional assistance should be sought.
The main purpose of monochlorodimethylbutylsilane is as a crosslinking agent for silicone rubber, which can improve the heat resistance and chemical resistance of rubber. It can also be used to manufacture sealing materials, waterproof coatings, synthetic resins, etc.
The production method of monochlorodimethylbutylsilane can be obtained by reacting dimethyldichlorosilane with butyllithium, or by reacting trichlorosilane with butyllithium and copper oxide.
Chlorodimethylbutylsilane has certain safety risks. It is irritating to skin and eyes and may cause allergic reactions. Avoid direct contact during operation and wear protective gloves, goggles and gas masks if necessary. At the same time, it should be operated in a well-ventilated environment to avoid inhaling its vapor. In the event of an accident, appropriate emergency measures should be taken immediately and professional assistance should be sought.
Last Update：2024-04-09 21:11:58
