Silanol, 1-(1E)-1-hepten-1-yl-1,1-bis(1-methylethyl)-

Silanol, 1-(1E)-1-hepten-1-yl-1,1-bis(1-methylethyl)- - Names and Identifiers

Name	(1E)-hept-1-en-1-yl(dipropan-2-yl)silanol
Synonyms	LogP (E)-HEPTENYLDIISOPROPYLSILANOL (1E)-hept-1-en-1-yl(dipropan-2-yl)silanol Silanol, 1-(1E)-1-hepten-1-yl-1,1-bis(1-methylethyl)-
CAS	261717-41-3
InChI	InChI=1/C13H28OSi/c1-6-7-8-9-10-11-15(14,12(2)3)13(4)5/h10-14H,6-9H2,1-5H3/b11-10+

Silanol, 1-(1E)-1-hepten-1-yl-1,1-bis(1-methylethyl)- - Physico-chemical Properties

Molecular Formula	C13H28OSi
Molar Mass	228.45
Density	0.843±0.06 g/cm3(Predicted)
Boling Point	88°C/0.1mmHg
Flash Point	129.379°C
Vapor Presure	0mmHg at 25°C
Specific Gravity	0.877
pKa	14.32±0.53(Predicted)
Sensitive	4: no reaction with water under neutral conditions
Refractive Index	1.4640

Silanol, 1-(1E)-1-hepten-1-yl-1,1-bis(1-methylethyl)- - Risk and Safety

TSCA

Silanol, 1-(1E)-1-hepten-1-yl-1,1-bis(1-methylethyl)- - Introduction

(1E)-hept-1-en-1-yl(dipropan-2-yl)silanol is an organosilicon compound with the chemical formula C13H28OSi. Its main properties are as follows:

1. Appearance: colorless to yellowish liquid or solid.
2. Solubility: dissolved in common organic solvents.
3. Melting Point: About -80 to -70 ℃.
4. Boiling point: about 120 to 125 ℃.
5. Density: about 0.838 to 0.843g/cm³.
6. Refractive index: about 1.442.

(1E)-hept-1-en-1-yl(dipropan-2-yl)silanol is mainly used as follows:

1. Construction of organosilicon compounds: As an intermediate in organic synthesis, it can be used to synthesize other organosilicon compounds, such as organosilicon polymers, Silanes, etc.
2. Surfactant: Due to its hydrophobic and hydrophilic structure, it can be used as a surfactant to improve the performance of coatings, plastics, rubber and other materials.
3. Cosmetics and skin care additives: can be used to adjust the texture and consistency of cosmetics and skin care products.
4. Pharmaceutical field: Application in the research and development of drugs and drug delivery systems.

The synthesis of (1E)-hept-1-en-1-yl(dipropan-2-yl)silanol can be obtained by the reaction of Heptene with diisopropyl silicon oxide catalyzed by Raybrook acid catalyst.

Regarding safety information, this compound is relatively safe under normal use conditions, but the following matters still need to be paid attention:

1. Storage: should be stored in a dry, well-ventilated place, away from fire and oxidant.
2. Use: Wear appropriate protective equipment, such as chemical goggles, gloves and protective clothing.
3. Avoid inhalation: Avoid inhaling its vapor or mist. If it does not adapt, immediately remove it from the place and seek medical help.
4. Avoid skin contact: avoid prolonged contact with the skin, such as accidental contact should immediately rinse with plenty of water, and seek medical attention.

Last Update：2024-04-09 21:21:28