| Name | Spining lubricant agent |
| Synonyms | wool oil Spining lubricant agent |
| PH | 6~7 |
| Physical and Chemical Properties | Chemical quality This product is milky white or yellow viscous liquid. |
| Use | Use 1, this product is mainly used for wool combing oil. The ratio of oil to water can be determined by the working fluid according to the rehydration of wool and oil. 2, for pure wool and other synthetic fiber spinning |
Store in a cool and shaded area, away from sources of ignition. Protect from sunlight and rain during transportation.
1. Put Span-6060kg and Tween-6090kg into the reaction kettle in sequence and stir evenly. Gradually add 850kq mineral oil within 0.5h and stir for 0.5-1.0h. Take 31.8% of this liquid, add 68.2% water, quickly stir evenly, and continue stirring for 0.5-1.0 hours to prepare the finished product.
2. Put 40 portions of the mixture into the reaction kettle, add 100L of water, heat to boiling to dissolve the mixture, and slowly add 80 portions of sodium alkyl sulfonate (No. 601). Quickly stir until milky white. Then, within 15 minutes, add 320 parts of the spindle oil dropwise, stir while adding, and finally add water to 1000 parts. Mix well to obtain the finished product.
3. Put 70kg of No.7 spindle oil and 20kg of oleic acid into a reaction kettle in sequence, heat them to 60-80 ℃, and keep them warm for 20 minutes under stirring. In addition, put 10kg of triethanolamine into a dissolution tank and add 30kg of water to dissolve it. Slowly add triethanolamine aqueous solution to the reaction kettle under stirring, and keep it at 60 ℃ for 0.5~1h to prepare the finished product.
4. Put 6kg of polyoxyethylene castor oil, 30kg of Taikoo oil, and 10kg of spindle oil into the reaction kettle in sequence, and mix well. Add 290kg of spindle oil and 225L of water dropwise, and stir for 40min to obtain the finished product.
put Span -60 60kg and Tween -60 90kg into the reaction kettle in turn and stir evenly. 850 kg of mineral oil was gradually added dropwise within 0.5 h, and then stirred for 0.5~1.0 h. Take the 31.8% of this liquid, add water 68.2%, quickly stir evenly, continue to stir for 0.5~1.0 h to make the finished product.
Put 40 parts of flat plus O into the reaction kettle, add 100 L of water, heat to boiling to dissolve flat plus, then slowly add 80 parts of sodium alkyl sulfonate (601), and quickly stir until milky white. Then add 320 parts of spindle oil dropwise within 15 min, stir while adding and finally add water to 1,000 parts. And even to get the finished product.
70 kg7 spindle oil and 20 kg oleic acid are successively put into the reaction kettle, heated to 60~80 ℃, kept warm for 20 min under stirring, in addition, 10 kg triethanolamine is put into the dissolution tank, and 30 kg of water is added to dissolve it. The triethanolamine aqueous solution was slowly added into the reaction kettle under stirring, and the temperature was kept at 60 ℃ for 0.5~1 h to obtain the finished product.
6 kg of polyoxyethylene castor oil, 30 kg of arche oil and 10 kg of spindle oil were successively put into the reaction kettle and stirred and mixed evenly. Add 290 kg of spindle oil dropwise, 225 L of water, and stir for 40 min to obtain the finished product.