TETRABUTYLAMMONIUM DICHROMATE
Bis(tetrabutylammonium) dichromate
CAS: 56660-19-6
Molecular Formula: C32H72Cr2N2O7
TETRABUTYLAMMONIUM DICHROMATE - Names and Identifiers
TETRABUTYLAMMONIUM DICHROMATE - Physico-chemical Properties
| Molecular Formula | C32H72Cr2N2O7 |
| Molar Mass | 700.92 |
| Melting Point | 139-143 °C (lit.) |
| Water Solubility | Soluble in water. |
| Storage Condition | Room Temprature |
| MDL | MFCD00013104 |
TETRABUTYLAMMONIUM DICHROMATE - Risk and Safety
| Risk Codes | R49 - May cause cancer by inhalation R8 - Contact with combustible material may cause fire R43 - May cause sensitization by skin contact R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S53 - Avoid exposure - obtain special instructions before use. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S60 - This material and its container must be disposed of as hazardous waste. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 1479 5.1/PG 2 |
| WGK Germany | 2 |
| FLUKA BRAND F CODES | 8 |
| HS Code | 29319090 |
| Hazard Class | 5.1 |
| Packing Group | III |
TETRABUTYLAMMONIUM DICHROMATE - Introduction
Bis (Tetrabuutylammonium) dichromate is an inorganic compound with the chemical formula [(C4H9)4N]2Cr2O7. The following is a description of the properties, uses, preparation and safety information of the compound:
Nature:
Bis (tetrabuutylammonium) dichromate is an orange-red crystal, soluble in organic solvents such as alcohols and ethers, but insoluble in water. It is relatively stable to heat and light, but may decompose at high temperatures.
Use:
Bis (tetrabuutylammonium) dichromate is often used as an oxidant in chemical laboratories to oxidize organic matter into ketones, aldehydes, acids, etc. It is also used for the preparation of oxidation products in organic synthesis.
Method:
The preparation of Bis(tetrabutylammonium) dichuromate can usually be obtained by the reaction of sodium chromate and tetrabutylammonium bromide. In the reaction, sodium chromate and tetrabutylammonium bromide react in an organic solvent to produce a precipitate of Bis(tetrabutylammonium) dichuromate. After slight purification, the product can be obtained.
Safety Information:
Bis(tetrabutylammonium) dichromate has certain toxicity, should avoid inhalation, intake and contact with skin. When used in the laboratory, wear appropriate personal protective equipment such as gloves, protective glasses and laboratory coats. At the same time, safe operating procedures should be followed during operation and adequate ventilation should be provided. Due to its oxidation, it is necessary to avoid contact with flammable substances. When stored, should be stored in a sealed container, away from combustibles and flammable materials, in a cool and dry location. If necessary, refer to the Chemical Safety Data Sheet for further information.
Nature:
Bis (tetrabuutylammonium) dichromate is an orange-red crystal, soluble in organic solvents such as alcohols and ethers, but insoluble in water. It is relatively stable to heat and light, but may decompose at high temperatures.
Use:
Bis (tetrabuutylammonium) dichromate is often used as an oxidant in chemical laboratories to oxidize organic matter into ketones, aldehydes, acids, etc. It is also used for the preparation of oxidation products in organic synthesis.
Method:
The preparation of Bis(tetrabutylammonium) dichuromate can usually be obtained by the reaction of sodium chromate and tetrabutylammonium bromide. In the reaction, sodium chromate and tetrabutylammonium bromide react in an organic solvent to produce a precipitate of Bis(tetrabutylammonium) dichuromate. After slight purification, the product can be obtained.
Safety Information:
Bis(tetrabutylammonium) dichromate has certain toxicity, should avoid inhalation, intake and contact with skin. When used in the laboratory, wear appropriate personal protective equipment such as gloves, protective glasses and laboratory coats. At the same time, safe operating procedures should be followed during operation and adequate ventilation should be provided. Due to its oxidation, it is necessary to avoid contact with flammable substances. When stored, should be stored in a sealed container, away from combustibles and flammable materials, in a cool and dry location. If necessary, refer to the Chemical Safety Data Sheet for further information.
Last Update：2024-04-10 22:29:15
