TRIFLUOROMETHANESULFONIC ACID TIN(II) SALT
stannous trifluoromethanesulfonate
CAS: 62086-04-8
Molecular Formula: C2F6O6S2Sn
TRIFLUOROMETHANESULFONIC ACID TIN(II) SALT - Names and Identifiers
TRIFLUOROMETHANESULFONIC ACID TIN(II) SALT - Physico-chemical Properties
| Molecular Formula | C2F6O6S2Sn |
| Molar Mass | 416.85 |
| Melting Point | ≥300 °C (lit.) |
| Boling Point | 162°C at 760 mmHg |
| Water Solubility | Insoluble in water. |
| Vapor Presure | 1.14mmHg at 25°C |
| Appearance | Powder |
| Color | White to yellow |
| Storage Condition | Inert atmosphere,2-8°C |
| Stability | hygroscopic |
| Sensitive | Moisture Sensitive |
| MDL | MFCD00191251 |
TRIFLUOROMETHANESULFONIC ACID TIN(II) SALT - Risk and Safety
| Risk Codes | R34 - Causes burns R36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S37/39 - Wear suitable gloves and eye/face protection |
| UN IDs | UN 3146 6.1/PG 3 |
| WGK Germany | 3 |
| FLUKA BRAND F CODES | 1-10 |
| TSCA | No |
| HS Code | 29049090 |
| Hazard Note | Corrosive |
| Hazard Class | 6.1 |
| Packing Group | III |
TRIFLUOROMETHANESULFONIC ACID TIN(II) SALT - Introduction
stannous trifluoromethanesulfonate (chemical formula: Sn(CF3SO3)2), also known as stannous fluoromethanesulfonate, is an inorganic compound. The following is its nature, use, preparation and safety information:
1. nature:
-Appearance: stannous trifluoromethanesulfonate are colorless crystals or white solids.
-melting point: around 140-145 ℃.
-Solubility: Soluble in organic solvents such as ethanol and ether.
2. use:
-Catalyst: stannous trifluoromethanesulfonate can be used as catalysts in organic synthesis reactions, such as esterification, etherification, condensation reactions, etc.
-Electronics industry: It can also be used for the preparation of dyes and the synthesis of plastics.
3. Preparation method:
stannous trifluoromethanesulfonate can be prepared by the following steps:
-First, dissolve fluoromethanesulfonic acid (CF3SO3H) in an appropriate amount of solvent.
-Then, add stannous acid salt to the solution and stir to react.
-Finally, the stannous trifluoromethanesulfonate is obtained through the steps of crystallization, filtration and drying.
4. Safety Information:
- stannous trifluoromethanesulfonate has a stimulating effect on the skin and eyes, you need to pay attention to avoid contact.
-In handling and storage, appropriate safety measures should be taken, such as wearing protective gloves, safety glasses, etc.
-During use, care should be taken to avoid inhaling its dust or steam to avoid harm to the respiratory system.
-It should be stored in a closed container, away from fire sources and oxidants to avoid fire or explosion.
-If accidentally inhaled or ingested, seek medical attention immediately.
-When disposing of waste, it should be disposed of in accordance with local regulations.
Please note that the above information is for reference only. Relevant literature and chemical safety data sheets should be carefully read before specific operation and use.
1. nature:
-Appearance: stannous trifluoromethanesulfonate are colorless crystals or white solids.
-melting point: around 140-145 ℃.
-Solubility: Soluble in organic solvents such as ethanol and ether.
2. use:
-Catalyst: stannous trifluoromethanesulfonate can be used as catalysts in organic synthesis reactions, such as esterification, etherification, condensation reactions, etc.
-Electronics industry: It can also be used for the preparation of dyes and the synthesis of plastics.
3. Preparation method:
stannous trifluoromethanesulfonate can be prepared by the following steps:
-First, dissolve fluoromethanesulfonic acid (CF3SO3H) in an appropriate amount of solvent.
-Then, add stannous acid salt to the solution and stir to react.
-Finally, the stannous trifluoromethanesulfonate is obtained through the steps of crystallization, filtration and drying.
4. Safety Information:
- stannous trifluoromethanesulfonate has a stimulating effect on the skin and eyes, you need to pay attention to avoid contact.
-In handling and storage, appropriate safety measures should be taken, such as wearing protective gloves, safety glasses, etc.
-During use, care should be taken to avoid inhaling its dust or steam to avoid harm to the respiratory system.
-It should be stored in a closed container, away from fire sources and oxidants to avoid fire or explosion.
-If accidentally inhaled or ingested, seek medical attention immediately.
-When disposing of waste, it should be disposed of in accordance with local regulations.
Please note that the above information is for reference only. Relevant literature and chemical safety data sheets should be carefully read before specific operation and use.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: Tin(II) trifluoromethanesulfonate Visit Supplier Webpage Request for quotationCAS: 62086-04-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Spot supply
Product Name: Tin(II) trifluoromethanesulfonate Visit Supplier Webpage Request for quotationCAS: 62086-04-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History