Vinylformic acid
Acrylic acid
CAS: 79-10-7
Molecular Formula: C3H4O2
Vinylformic acid - Names and Identifiers
| Name | Acrylic acid |
| Synonyms | AA Propensαure Acrylic acid Propenoic acid vinylformicacid 2-PROPENOIC ACID Vinylformic acid rcrawastenumberu008 acrylic acid anhydrous Rcra waste number U008 ETHYLENECARBOXYLIC ACID |
| CAS | 79-10-7 |
| EINECS | 201-177-9 |
| InChI | InChI=1/C3H4O2/c1-2-3(4)5/h2H,1H2,(H,4,5) |
Vinylformic acid - Physico-chemical Properties
| Molecular Formula | C3H4O2 |
| Molar Mass | 72.06 |
| Density | 1.051 g/mL at 25 °C (lit.) |
| Melting Point | 13 °C (lit.) |
| Boling Point | 139 °C (lit.) |
| Flash Point | 130°F |
| Water Solubility | MISCIBLE |
| Solubility | 1000g/l |
| Vapor Presure | 4 mm Hg ( 20 °C) |
| Vapor Density | 2.5 (vs air) |
| Appearance | Liquid |
| Color | Clear |
| Odor | Acrid odor |
| Exposure Limit | TLV-TWA 10 ppm (30 mg/m3) (ACGIH). |
| Maximum wavelength(λmax) | 231nm(lit.) |
| Merck | 14,130 |
| BRN | 635743 |
| pKa | 4.25(at 25℃) |
| PH | 3.68(1 mM solution);3.14(10 mM solution);2.63(100 mM solution); |
| Storage Condition | Store at +15°C to +25°C. |
| Stability | Stability Unstable - may contain p-methoxyphenol as an inhibitor. Prone to hazardous polymerization. Combustible. Incompatible with strong oxidizing agents, strong bases, amines. Contact with oxidizer |
| Sensitive | Air Sensitive |
| Explosive Limit | 3.9-19.8%(V) |
| Refractive Index | n20/D 1.421 |
| Physical and Chemical Properties | Characteristics of colorless liquid, irritating odor. melting point 13.5 ℃ boiling point 141 ℃ relative density 1.052 refractive index 1.4185 flash point 68.3 ℃ solubility: soluble in water, ethanol and ether. |
| Use | Preparation of high polymers by homopolymerization or copolymerization, used in coatings, adhesives, solid resins, molding compounds, etc. |
Vinylformic acid - Risk and Safety
| Risk Codes | R10 - Flammable R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. R35 - Causes severe burns R50 - Very Toxic to aquatic organisms |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 2218 8/PG 2 |
| WGK Germany | 1 |
| RTECS | AS4375000 |
| FLUKA BRAND F CODES | 8-13 |
| TSCA | Yes |
| HS Code | 29161110 |
| Hazard Class | 8 |
| Packing Group | II |
| Toxicity | LD50 orally in rats: 2.59 g/kg (Smyth) |
Vinylformic acid - Upstream Downstream Industry
Vinylformic acid - Nature
Open Data Verified Data
colorless liquid with pungent odor. Strong acidity, serious corrosion. Melting point 13.5 °c. Boiling point of 141 deg C (101. 3kPa). The relative density was 1. 052. Flash point (Open Cup) 68.3 °c. Refractive index 4185. Soluble in water, ethanol and ether, easy polymerization.
Last Update：2024-01-02 23:10:35
Vinylformic acid - Preparation Method
Open Data Verified Data
- propylene oxidation propylene is oxidized to produce acrylic acid in two steps under the action of molybdenum catalyst, and then absorbed by water, solvent extraction and vacuum distillation to obtain a finished product. The reaction conditions were as follows: the reaction temperature in the first stage was 330-430 ℃, and the reaction temperature in the second stage was 280-360℃.
- acrylonitrile hydrolysis method acrylonitrile in the presence of sulfuric acid catalyst, hydrolysis reaction is carried out, the first step hydrolysis to generate acrylamide sulfate, and then the direct hydrolysis of water vapor to generate acrylic acid, and then reduced pressure distillation to obtain the finished product.
Last Update：2022-01-01 10:31:15
Vinylformic acid - Use
Open Data Verified Data
important organic chemical raw materials, but also important synthetic resin monomer. Its main derivatives are various acrylates and acrylates. The most famous esters and salts are methyl acrylate, ethyl ester, butyl ester, isooctyl Ester, Hydroxyethyl Ester, hydroxypropyl Ester and sodium acrylate. Because the molecule of acrylic acid has unsaturated double bonds and carboxyl functional groups, it can be copolymerized and homopolymerized with many monomers, and used as raw materials for coatings, adhesives and various additives. It is widely used in chemical industry, light industry, textile, building materials and pharmaceutical industries and fields.
Last Update：2022-01-01 10:31:15
Vinylformic acid - Safety
Open Data Verified Data
- This product has strong corrosion, moderate toxicity. Its aqueous solution or high concentration of vapor can irritate the skin and mucous membranes. The oral LD50 of rats was 590mg/kg. Care should not be taken to contact with acrylic acid solution or steam, and work clothes and work caps, protective glasses and rubber gloves should be worn during operation. Production equipment should be closed. Work and storage sites should have good ventilation conditions.
- It is packed in a polyethylene-lined iron drum, weighing 200kg per barrel, and a stainless steel or carbon steel storage tank can be used, but moisture and moisture must be prevented to prevent the polymerization of acrylic acid caused by rust. 200 x 10-6 of the polymerization inhibitor was added during storage and transportation. According to the "corrosive chemicals" storage and transportation.
Last Update：2022-01-01 10:31:16
Vinylformic acid - Introduction
Acrylic acid, chemical formula C3H4O2, is a colorless liquid with a pungent odor. The following is a brief introduction to the nature, use, formulation and safety information of Acrylic acid.
Nature:
1. Acrylic acid is a strong irritating organic acid, can react violently with water.
2. With high volatility, it can quickly volatilize into colorless and irritating vapor at room temperature.
3. Acrylic acid can be polymerized with many substances to prepare Poly Acrylic acid and its copolymers.
Use:
1. Acrylic acid is widely used in the chemical industry to prepare polymer materials such as Poly Acrylic acid, Acrylic acid ester and its copolymers.
2. Acrylic acid and its derivatives are also used in the preparation of adhesives, plastics, coatings and inks.
3. Acrylic acid can also be used as a rubber dispersant and textile finishing agent.
Preparation Method:
Acrylic acid can be obtained by hydrolysis of acrylonitrile. First, acrylonitrile is added to the alkaline aqueous solution, and acrylonitrile is converted to Acrylic acid by hydrolysis reaction.
Safety Information:
1. Acrylic acid is irritating. Contact with skin and eyes will cause burning sensation and may cause tissue damage.
2. Need to operate in a well-ventilated place to avoid inhalation of Acrylic acid vapor.
3. In the operation and storage, attention should be paid to prevent the Acrylic acid from coming into contact with the fire source or oxidant, so as not to cause fire or explosion.
4. Use personal protective equipment, such as chemical goggles, protective gloves, and protective clothing.
Nature:
1. Acrylic acid is a strong irritating organic acid, can react violently with water.
2. With high volatility, it can quickly volatilize into colorless and irritating vapor at room temperature.
3. Acrylic acid can be polymerized with many substances to prepare Poly Acrylic acid and its copolymers.
Use:
1. Acrylic acid is widely used in the chemical industry to prepare polymer materials such as Poly Acrylic acid, Acrylic acid ester and its copolymers.
2. Acrylic acid and its derivatives are also used in the preparation of adhesives, plastics, coatings and inks.
3. Acrylic acid can also be used as a rubber dispersant and textile finishing agent.
Preparation Method:
Acrylic acid can be obtained by hydrolysis of acrylonitrile. First, acrylonitrile is added to the alkaline aqueous solution, and acrylonitrile is converted to Acrylic acid by hydrolysis reaction.
Safety Information:
1. Acrylic acid is irritating. Contact with skin and eyes will cause burning sensation and may cause tissue damage.
2. Need to operate in a well-ventilated place to avoid inhalation of Acrylic acid vapor.
3. In the operation and storage, attention should be paid to prevent the Acrylic acid from coming into contact with the fire source or oxidant, so as not to cause fire or explosion.
4. Use personal protective equipment, such as chemical goggles, protective gloves, and protective clothing.
Last Update：2024-04-10 22:29:15
Supplier List
Featured ProductsMultiple SpecificationsSpot supply
Product Name: Acrylic acid Request for quotationCAS: 79-10-7
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3787852685
Featured ProductsMultiple Specifications
Product Name: Acrylic acid Request for quotationCAS: 79-10-7
Tel: 17505222756
Email: pules.cn@gmail.com
Mobile: +86-17551318830
Wechat: 17505222756
Multiple SpecificationsSpot supply
Product Name: Acrylic acid Request for quotationTel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865
Multiple SpecificationsSpot supply
Product Name: *Sugammadex Impurity 64 Visit Supplier Webpage Request for quotationCAS: 79-10-7
Tel: 0714-3999186
Email: 2853786052@qq.com
Mobile: 86+15671228036
QQ: 2853786052
Wechat: 15671228036
Product Name: Acrylic acid Request for quotation
CAS: 79-10-7
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 0086 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
CAS: 79-10-7
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 0086 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
Product Name: Acrylic acid Request for quotation
CAS: 79-10-7
Tel: +86-21-56795779
Email: charles7788@worldyachem.com
Mobile: +86-13651600618
QQ: 2850607228
Wechat: 13651600618
WhatsApp: +8613651600618
CAS: 79-10-7
Tel: +86-21-56795779
Email: charles7788@worldyachem.com
Mobile: +86-13651600618
QQ: 2850607228
Wechat: 13651600618
WhatsApp: +8613651600618
Spot supply
Product Name: Acrylic acid Request for quotationCAS: 79-10-7
Tel:
Email: sales2@promisechemical.com
Mobile: +8618369999171
WhatsApp: +8618369999171
Featured ProductsMultiple SpecificationsSpot supply
Product Name: Acrylic acid Request for quotationCAS: 79-10-7
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3787852685
Featured ProductsMultiple Specifications
Product Name: Acrylic acid Request for quotationCAS: 79-10-7
Tel: 17505222756
Email: pules.cn@gmail.com
Mobile: +86-17551318830
Wechat: 17505222756
Multiple SpecificationsSpot supply
Product Name: Acrylic acid Request for quotationTel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865
Multiple SpecificationsSpot supply
Product Name: *Sugammadex Impurity 64 Visit Supplier Webpage Request for quotationCAS: 79-10-7
Tel: 0714-3999186
Email: 2853786052@qq.com
Mobile: 86+15671228036
QQ: 2853786052
Wechat: 15671228036
Product Name: Acrylic acid Request for quotation
CAS: 79-10-7
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 0086 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
CAS: 79-10-7
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 0086 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
Product Name: Acrylic acid Request for quotation
CAS: 79-10-7
Tel: +86-21-56795779
Email: charles7788@worldyachem.com
Mobile: +86-13651600618
QQ: 2850607228
Wechat: 13651600618
WhatsApp: +8613651600618
CAS: 79-10-7
Tel: +86-21-56795779
Email: charles7788@worldyachem.com
Mobile: +86-13651600618
QQ: 2850607228
Wechat: 13651600618
WhatsApp: +8613651600618
Spot supply
Product Name: Acrylic acid Request for quotationCAS: 79-10-7
Tel:
Email: sales2@promisechemical.com
Mobile: +8618369999171
WhatsApp: +8618369999171
View History
Raw Materials for Vinylformic acid
Downstream Products for Vinylformic acid
hydroxypropyl acrylate, mixture of isomers
Butyl Acrylate
methylacrylate
2-Ethylhexyl acrylate
trimethylolpropane ethoxylate (1 eo|oh) triacrylate
Acrylic acid Polymers
Butyl Acrylate
methylacrylate
2-Ethylhexyl acrylate
trimethylolpropane ethoxylate (1 eo|oh) triacrylate
Acrylic acid Polymers