Name | Zinc Nitrate Hexahydrate |
Synonyms | ZN(NO3)2 Zinc nitrate zinc dinitrate ZINC NITRATE 6H2O Zinc nitrate hydrate ZINC NITRATE, 6-HYDRATE Zincnitrate(metalsbasis) Zinc Nitrate Hexahydrate ZINC NITRATE-6-HYDRATE PURE ZINC ICP STANDARD, ZN(NO3)2 |
CAS | 10196-18-6 |
EINECS | 600-255-3 |
InChI | InChI=1/NO3.6H2O.Zn/c2-1(3)4;;;;;;;/h;6*1H2;/q-1;;;;;;;+2 |
InChIKey | JGPSMWXKRPZZRG-UHFFFAOYSA-N |
Molecular Formula | H12N2O12Zn |
Molar Mass | 297.49 |
Density | 2.065g/mLat 25°C(lit.) |
Melting Point | 36°C(lit.) |
Water Solubility | 1800 G/L (20 ºC) |
Solubility | water: soluble(lit.) |
Appearance | Solid |
Specific Gravity | 2.07 |
Color | White |
Merck | 14,10144 |
PH | pH(100g/l, 25℃) : 3.5~5.4 |
Sensitive | Hygroscopic |
Physical and Chemical Properties | Character: colorless tetragonal crystals. melting point 36.4 ℃ relative density 2.065(14 ℃) soluble in water and ethanol. Its aqueous solution is acidic. |
Use | Mainly used for bicycle parts zinc plating, Preparation of steel phosphating agent |
Risk Codes | R8 - Contact with combustible material may cause fire R22 - Harmful if swallowed R36/37/38 - Irritating to eyes, respiratory system and skin. R38 - Irritating to the skin |
Safety Description | S17 - Keep away from combustible material. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S24/25 - Avoid contact with skin and eyes. |
UN IDs | UN 1514 5.1/PG 2 |
WGK Germany | 3 |
RTECS | ZH4775000 |
TSCA | Yes |
HS Code | 28342990 |
Hazard Class | 5.1 |
Packing Group | II |
Raw Materials | Zinc hypoxide Nitric acid Zinc oxide |
toxicity | its dust has damage to upper respiratory tract, trachea and bronchial mucosa. Its concentrated solution can cause ulcers on the skin. Long-term contact with this product will occur dermatitis. Production workers should wear work clothes, protective masks, latex gloves and other labor protection articles to protect the skin and respiratory organs. Production equipment should be closed, ventilation should be good. Take a hot shower after work. |
Application | mainly used for zinc plating of machine and bicycle parts, mordant for textile dyeing, etc. is used for zinc plating of machine and bicycle parts. Preparation of steel phosphating agent, fabric dyeing used as mordant, dye synthetic preservation agent, used as latex coagulant. used as an analytical reagent, and also used in the pharmaceutical industry analytical reagent to determine the turbidity of sulfur in blood. |
production method | zinc oxide method a certain amount of water is added to the reactor, slowly add nitric acid and zinc oxide to the reaction to pH 1.6~4 with stirring according to the ingredient ratio of 100%: 1 (based on the content of 3.5), stand for 24h, filter, dilute the filtrate with water to 30~36 ° Bé, adjust to Ph 3 with nitric acid, add zinc powder, stir for several minutes to replace Cu2 +, Pb2 + plasma, and then clarify, the clear liquid obtained by Suction filtration is acidified, concentrated to 60-63 ° Bé by evaporation, and then cooled to below 50 ° C. With stirring to obtain a finished zinc nitrate product. If the ZnO +2HNO3 → Zn(NO3)2 + H2O uses more than 98% zinc oxide as the raw material, the impurity removal process can be saved. |
colorless crystals. Tasteless. Melting point approximately 36 °c; d 2.065. Soluble in about 0.5 parts of water, the aqueous solution is acidic, 5% aqueous solution pH 5.1. Deliquescence. Soluble in ethanol. It was dissolved in crystallization water by heating to 37 °c. All water of crystallization was lost at 105-131 °c. Decomposition at high temperature produces a gas of nitrogen oxides that is irritating and highly toxic, causing poisoning by inhalation. When combustible materials are on fire, they can contribute to the fire. With sulfur, phosphorus, carbon, copper, metal sulfide and organic contact intense reaction.
The Nitric acid aqueous solution was heated, the zinc particles were added to the solution in several times, dissolved, filtered, and the filtrate was evaporated to a relative density of 1. 61 pairs, and cooled and suction filtered.
determination of sulfur in Analytical reagents, such as blood. Also used in latex coagulant, Catalyst, printing and dyeing mordant, zinc plating, steel phosphating agent.
store in a cool, ventilated warehouse. Keep away from fire and heat source. Packaging must be completely sealed to prevent moisture absorption. It should be stored separately from combustible materials, combustible materials, reducing agents, active metal powders, etc., and should not be mixed.