benzoic acid, 2-amino-5-nitro-, methyl ester - Names and Identifiers
benzoic acid, 2-amino-5-nitro-, methyl ester - Physico-chemical Properties
Molecular Formula | C8H8N2O4
|
Molar Mass | 196.16 |
Density | 1.386±0.06 g/cm3(Predicted) |
Melting Point | 167-169 °C |
Boling Point | 377.9±22.0 °C(Predicted) |
Flash Point | 182.3°C |
Vapor Presure | 6.54E-06mmHg at 25°C |
pKa | -1.53±0.10(Predicted) |
Storage Condition | Keep in dark place,Inert atmosphere,Room temperature |
Refractive Index | 1.606 |
benzoic acid, 2-amino-5-nitro-, methyl ester - Risk and Safety
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
Hazard Note | Harmful |
benzoic acid, 2-amino-5-nitro-, methyl ester - Introduction
Methyl 2-amino-5-nitrobenzoate, chemical formula C8H8N2O4, is an organic compound. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: Methyl 2-amino-5-nitrobenzoate is a pale yellow crystalline or solid.
-Solubility: It is soluble in organic solvents such as alcohol, dimethyl sulfoxide and dichloromethane, and insoluble in water.
-Melting point: Its melting point is about 118-119°C.
-Specific gravity: Its density is about 1.43g/cm³.
Use:
- Methyl 2-amino-5-nitrobenzoate is commonly used as an intermediate compound in organic synthesis.
-It can also be used as a raw material for the synthesis of dyes, fluorescent dyes and drugs.
Preparation Method:
The preparation method of Methyl 2-amino-5-nitrobenzoate can be carried out by the following steps:
1.2-amino -5-nitrobenzoic acid was obtained by reacting methyl 2-nitrobenzoate with ammonia under acidic conditions.
2. react 2-amino-5-nitrobenzoic acid with formic acid to generate Methyl 2-amino-5-nitrobenzoate.
Safety Information:
- Methyl 2-amino-5-nitrobenzoate is irritating and damaging to the eyes, skin and respiratory tract.
-Wear appropriate protective equipment such as gloves, safety goggles and face shields during use.
-Avoid inhalation or contact with skin and eyes, and ensure that the operating area is well ventilated.
-Correct laboratory safety procedures should be followed when handling this compound.
Last Update:2024-04-09 02:00:45