encapsulated mgo
Magnesium oxide
CAS: 1309-48-4
Molecular Formula: MgO
encapsulated mgo - Names and Identifiers
encapsulated mgo - Physico-chemical Properties
| Molecular Formula | MgO |
| Molar Mass | 40.3 |
| Density | 3.58 |
| Melting Point | 2852 °C (lit.) |
| Boling Point | 3600 °C |
| Flash Point | 3600°C |
| Water Solubility | 6.2 mg/L (20 ºC), reacts |
| Solubility | 5 M HCl: 0.1M at20°C, clear, colorless |
| Appearance | White powder |
| Specific Gravity | 3.58 |
| Color | White |
| Exposure Limit | ACGIH: TWA 10 mg/m3OSHA: TWA 15 mg/m3NIOSH: IDLH 750 mg/m3 |
| Maximum wavelength(λmax) | λ: 260 nm Amax: ≤0.040λ: 280 nm Amax: ≤0.025 |
| Merck | 14,5677 |
| PH | 10.3 (H2O, 20℃)(saturated solution) |
| Storage Condition | no restrictions. |
| Stability | Stable. Incompatible with bromine trifluoride, bromine trichloride, phosphorus pentachloride. |
| Sensitive | Air Sensitive |
| Refractive Index | 1.736 |
| MDL | MFCD00011109 |
| Physical and Chemical Properties | density 3.58 |
| Use | Used for refractory, enamel, polishing agent, adhesive, paint, etc |
encapsulated mgo - Risk and Safety
| Safety Description | S24/25 - Avoid contact with skin and eyes. |
| UN IDs | UN 1418 |
| HS Code | 25199099 |
| Toxicity | TCLo inhalation in human: 400mg/m3 |
encapsulated mgo - Upstream Downstream Industry
| Raw Materials | Dolomite Sulfuric acid Magnesium Carbonate |
| Downstream Products | Nitric acid Magnesium Hydroxide Magnesium nitrate Magnesium hexafluorosilicate Magnesium peroxide |
encapsulated mgo - Nature
Open Data Verified Data
White fine crystals. The relative density is 3. 19~3. 71; The melting point is 2800 ℃; The magnetization coefficient is -0.008 × 10-6. Almost insoluble in water, soluble in dilute acid. Moisture and carbon dioxide are readily absorbed in the air.
Last Update：2024-01-02 23:10:35
encapsulated mgo - Preparation Method
Open Data Verified Data
The waste from the production of heavy Magnesium oxide is sent to the reactor, and hydrochloric acid is added to react to generate hexachloride, and then sodium carbonate is added to generate basic magnesium carbonate. After washing, it is calcined at high temperature, cooled and crushed, magnetic magnesium oxide was prepared.
Last Update：2022-01-01 08:59:28
encapsulated mgo - Standard
Authoritative Data Verified Data
This product shall be calculated by burning to constant weight, and the content of MgO shall not be less than 96.5%.
Last Update：2024-01-02 23:10:35
encapsulated mgo - Trait
Authoritative Data Verified Data
- This product is white or off-white powder; Odorless, tasteless; Can slowly absorb carbon dioxide in the air.
- This product is almost insoluble in water or ethanol; Dissolved in dilute acid.
Last Update：2022-01-01 11:23:58
encapsulated mgo - Introduction
It is divided into light and heavy. Lightweight volume fluffy, odorless, tasteless and non-toxic. It is difficult to dissolve in pure water and organic solvents, and its solubility in water increases due to the presence of carbon dioxide. Soluble in acid and ammonium salt solutions. In case of carbon dioxide in the air, magnesium carbonate double salt is generated. The heavy mass is compact in volume, easy to combine with water, and easy to absorb moisture and carbon dioxide in the exposed air. It is easy to gel and harden when mixed with magnesium chloride solution.
Last Update：2022-10-16 17:13:11
encapsulated mgo - Use
Open Data Verified Data
for Radio high frequency magnetic rod antenna, instead of ferrite. Can also be used for the manufacture of refractory fibers and other refractory materials.
Last Update：2022-01-01 08:59:29
encapsulated mgo - Differential diagnosis
Authoritative Data Verified Data
This product of dilute hydrochloric acid solution of magnesium salt identification reaction (General 0301).
Last Update：2022-01-01 11:23:58
encapsulated mgo - Safety
Open Data Verified Data
The material of the product packaging bag is required to be wear-resistant and not easy to break, and the bag mouth should be sealed when packaging. It is packed in double-layer bags, with plastic bags on the inner layer and woven bags on the outer layer. The weight of each bag can be 25kg, 30kg, 40kg or 80kg. The finished product must be stored in a warehouse free from moisture. Transport equipment must be kept clean, and have rain-and snow-proof facilities. Humidity and contamination must be prevented during transport.
Last Update：2022-01-01 11:01:41
encapsulated mgo - Exam
Authoritative Data Verified Data
apparent volume
take 15.0g of this product, add a simple amount, without vibration, the volume of not less than 100ml.
alkalinity
take this product l.O g, add 50ml of water, boil for 5 minutes, take advantage of heat filtration, filter residue is washed with appropriate amount of water, wash and human filtrate, add several drops of Methyl red indicator solution and sulfuric acid titration solution (0.05mol/L)2.0, the solution should change from yellow to red.
color of solution
take this product l.O g, add 15ml acetic acid and 5ml water, boil for 2 minutes, cool, add water to make 20 m l, if turbid, filter, the solution should be colorless; If color, shall not be deeper than the yellow-green No. 2 Standard Colorimetric solution (General rule 0901 first method).
chloride
take 1.0 of the test solution under the calcium oxide item, dilute it with water to 2 5 m l, and check it according to law (General Rule 0 8 0 1 ) , and standard sodium chloride solution 5. Compared with the control solution made of 0M l, it should not be more concentrated (0 .1%).
sulfate
take the test solution under the item of calcium oxide 2. 0ML, diluted to 20 m l with water, checked according to law (General 0802), and standard potassium sulfate solution 3. Compared with the control solution made of 0 M l, it should not be more concentrated (0 .3%).
carbonate
take 0.10g of this product, add 5ml of water, boil, cool, add acetic acid 5 m l, do not bubble boiling.
insolubles in acid
take 2.0g of this product, add 25ml of hydrochloric acid, heat it in a water bath to dissolve it, add 105 ml of water, and filter it through a No. 4 vertical melting crucible dried to constant weight at °C, the filter residue was washed with water until the washing solution showed no reaction of the vaporized product. At 105X, it was dried to constant weight, and the residual residue should not exceed 2.0mg(0.10%).
soluble substances
take this product l.O g, add 100ml of water, boil for 5 minutes, filter while hot, filter residue is washed with a small amount of water, combine the filtrate and wash, put it in an evaporating dish dried to constant weight by 105X, and put it on a water bath to evaporate, in 105X: dry to constant weight, the remaining residue should not pass 2 .0%.
ignition weight loss
take 0.50g of this product, burn to constant weight, and lose no more than 5 .0% of weight.
calcium chloride
take the new burning cold of this product 5. Add water 3 0 m l and acetic acid 7 0 m l and mix well, boil for 2 minutes, let cool, filter, filter residue is washed with dilute acetic acid, combine filtrate and wash, in a 10 0 m l measuring flask, dilute to the scale with dilute acetic acid, and shake well to serve as a test solution. Accurately measure 1 0 m l, add water 3 0 m l, add triethanolamine solution (3- lo n o m l and 45% potassium hydroxide solution 1 0 m l, place for 5 minutes, add calcium red indicator 0. l g, with ethylene diamine four sodium acetate titration solution (0. O lm o l/L) The titration was carried out until the solution turned from magenta to blue and the results of the titration were corrected with a blank test. Each lm l of ethylene diamine tetraacetic acid disodium titration solution (O .O lm o l/L) is equivalent to 0.5 6 0 8 m g of CaO, this product contains no more than 0. 50% calcium oxide.
Iron Salt
take 50mg of this product, add 2M l of dilute hydrochloric acid and 23ml of water to dissolve, check according to law (General rule 0807), and standard iron solution 2. 5M l of the control solution should not be deeper (0.05%).
manganese salt
take this product l .O g, add 20ml of water, 5ml of nitric acid, 5ml of sulfuric acid and lm l of phosphoric acid, heat and boil for 2 minutes, let it cool, and add potassium palmitate 2. Og, then boil for 5 minutes, cool, move into 50 M l colorimetric tube, with non-reducing water (3M l nitric acid and Potassium periodate 5g per 1000ml of water, boil for 2 minutes, cool) dilute to the scale, shake; With standard manganese solution (take anhydrous manganese sulfate that is burned to constant weight at 400-500°C. 275g, put in 1000ml measuring flask, add appropriate amount of water to dissolve and dilute to the scale, shake. Each lm l is equivalent to O. 10 mg of M n )0 .3 0M l compared with the control solution prepared by the same method, no deeper (0. 003%).
Heavy metals
take this product 0.50g, Add 10ml of dilute hydrochloric acid and 5ml of water, heat and dissolve, boil for 1 min, let it cool, filter, add 1 drop of phenolphthalein indicator solution to the filtrate, add appropriate amount of ammonia test solution Dropwise until the solution is light red, add acetate buffer (pH 3.5) 2M l and water to make 25ml, add ascorbic acid 0. 5 g after dissolution, check according to law (General Principles 0821 The first law), placed for 5 minutes colorimetric, heavy metals should not exceed 20 parts per million.
arsenic salt
take this product 0.5 0G, add hydrochloric acid 5 m l and water 2 3 m l to dissolve, check according to law (General Rule 0 8 2 2 2 first law), should comply with the regulations (0. 0 0 0 4).
Last Update：2022-01-01 11:23:59
encapsulated mgo - Content determination
Authoritative Data Verified Data
take this product 0.4g/precision weighing, precision plus sulfuric acid titration solution (0 .5M o l/L)25ml dissolved, add methyl orange indicator solution 1 drop, with sodium hydroxide titration solution (lm o l/L) titration, and the titration results with blank test correction. According to the amount of sulfuric acid consumed, the amount of sulfuric acid that should be consumed by the mixed calcium oxide (CaO) is subtracted, that is, the amount of sulfuric acid consumed by M gO in the Test amount. Each lm l of sulfuric acid titrant (0.5 m o l/L) corresponds to 20.15mg of MgO or 28.04 mg of CaO.
Last Update：2022-01-01 11:24:00
encapsulated mgo - Category
Authoritative Data Verified Data
pharmaceutical excipients, fillers and p H value regulator.
Last Update：2022-01-01 11:24:00
encapsulated mgo - Storage
Authoritative Data Verified Data
sealed storage.
Last Update：2022-01-01 11:24:00
encapsulated mgo - Introduction
Magnesium oxide is a white solid with the chemical formula MgO. It has high melting point, high thermal stability and corrosion resistance. The following is a description of the nature, use, formulation and safety information of Magnesium oxide:
Nature:
1. Magnesium oxide is non-toxic, but inhalation of high concentrations of dust may cause respiratory irritation.
2. It is a kind of insoluble in water material, almost no reaction in water.
3. Magnesium oxide has high hardness and high melting point, and is an excellent refractory material.
4. It has excellent thermal conductivity and electrical insulation properties.
Use:
1. Magnesium oxide is mainly used as a refractory material for industrial fields such as high-temperature furnaces, glass kilns and steel smelting.
2. It is also used as an electrical insulating material for the manufacture of electronic products such as wires and cables, televisions and computer monitors.
3. Magnesium oxide can be used as a pharmaceutical additive in the field of biomedicine, with analgesic, antidiarrheal and anti-acid properties.
Preparation Method:
1. Magnesium oxide can be prepared by calcining Magnesium salts (such as Magnesium chloride and Magnesium sulfate). At high temperatures, Magnesium salts decompose to form Magnesium oxide and gaseous by-products.
2. Another method for preparing Magnesium oxide is to react Magnesium metal with oxygen to produce a corresponding oxidation reaction.
Safety Information:
1. Magnesium oxide is a relatively safe chemical, but it may cause skin dryness and irritation under prolonged or heavy exposure.
2. In the operation of Magnesium oxide, should avoid inhalation of dust, if necessary, wear appropriate protective equipment.
3. If Magnesium oxide is swallowed, seek medical attention immediately.
In General, Magnesium oxide is an important refractory material with a wide range of uses in many industries and application fields. Safety precautions need to be taken when using and handling Magnesium oxide.
Nature:
1. Magnesium oxide is non-toxic, but inhalation of high concentrations of dust may cause respiratory irritation.
2. It is a kind of insoluble in water material, almost no reaction in water.
3. Magnesium oxide has high hardness and high melting point, and is an excellent refractory material.
4. It has excellent thermal conductivity and electrical insulation properties.
Use:
1. Magnesium oxide is mainly used as a refractory material for industrial fields such as high-temperature furnaces, glass kilns and steel smelting.
2. It is also used as an electrical insulating material for the manufacture of electronic products such as wires and cables, televisions and computer monitors.
3. Magnesium oxide can be used as a pharmaceutical additive in the field of biomedicine, with analgesic, antidiarrheal and anti-acid properties.
Preparation Method:
1. Magnesium oxide can be prepared by calcining Magnesium salts (such as Magnesium chloride and Magnesium sulfate). At high temperatures, Magnesium salts decompose to form Magnesium oxide and gaseous by-products.
2. Another method for preparing Magnesium oxide is to react Magnesium metal with oxygen to produce a corresponding oxidation reaction.
Safety Information:
1. Magnesium oxide is a relatively safe chemical, but it may cause skin dryness and irritation under prolonged or heavy exposure.
2. In the operation of Magnesium oxide, should avoid inhalation of dust, if necessary, wear appropriate protective equipment.
3. If Magnesium oxide is swallowed, seek medical attention immediately.
In General, Magnesium oxide is an important refractory material with a wide range of uses in many industries and application fields. Safety precautions need to be taken when using and handling Magnesium oxide.
Last Update：2024-04-17 15:19:18
Supplier List
Featured ProductsSpot supply
Product Name: Monodisperse nano MgO dispersion Visit Supplier Webpage Request for quotationCAS: 1309-48-4
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Featured ProductsMultiple SpecificationsSpot supply
Product Name: Magnesium oxide Request for quotationCAS: 1309-48-4
Tel: +86 19849939632
Email: 2470479589@qq.com
Mobile: +86 19849939632
QQ: 2470479589
Featured ProductsSpot supply
Product Name: Magnesium oxide Visit Supplier Webpage Request for quotationCAS: 1309-48-4
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922
Wechat: 18621343501
WhatsApp: +86-18621343501
Spot supply
Product Name: Magnesium oxide Request for quotationCAS: 1309-48-4
Tel: +86-18721521379
Email: 18721521379@163.com
Mobile: +86-18721521379
Wechat: 18721521379
Spot supply
Product Name: Magnesium oxide Request for quotationCAS: 1309-48-4
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3787852685
Wechat: chemical6666
Spot supply
Product Name: Magnesium oxide Request for quotationCAS: 1309-48-4
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865
Wechat: chemical6666
Product Name: Magnesium oxide Request for quotation
CAS: 1309-48-4
Tel: 17505222756
Email: pules.cn@gmail.com
Mobile: +86-17551318830
CAS: 1309-48-4
Tel: 17505222756
Email: pules.cn@gmail.com
Mobile: +86-17551318830
Spot supply
Product Name: Magnesium oxide Visit Supplier Webpage Request for quotationCAS: 1309-48-4
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185
Wechat: chinaskyrun
Product Name: Magnesium oxide Request for quotation
CAS: 1309-48-4
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
CAS: 1309-48-4
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
Multiple SpecificationsSpot supply
Product Name: Magnesium oxide Visit Supplier Webpage Request for quotationCAS: 1309-48-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Featured ProductsSpot supply
Product Name: Monodisperse nano MgO dispersion Visit Supplier Webpage Request for quotationCAS: 1309-48-4
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Featured ProductsMultiple SpecificationsSpot supply
Product Name: Magnesium oxide Request for quotationCAS: 1309-48-4
Tel: +86 19849939632
Email: 2470479589@qq.com
Mobile: +86 19849939632
QQ: 2470479589
Featured ProductsSpot supply
Product Name: Magnesium oxide Visit Supplier Webpage Request for quotationCAS: 1309-48-4
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922
Wechat: 18621343501
WhatsApp: +86-18621343501
Spot supply
Product Name: Magnesium oxide Request for quotationCAS: 1309-48-4
Tel: +86-18721521379
Email: 18721521379@163.com
Mobile: +86-18721521379
Wechat: 18721521379
Spot supply
Product Name: Magnesium oxide Request for quotationCAS: 1309-48-4
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3787852685
Wechat: chemical6666
Spot supply
Product Name: Magnesium oxide Request for quotationCAS: 1309-48-4
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865
Wechat: chemical6666
Product Name: Magnesium oxide Request for quotation
CAS: 1309-48-4
Tel: 17505222756
Email: pules.cn@gmail.com
Mobile: +86-17551318830
CAS: 1309-48-4
Tel: 17505222756
Email: pules.cn@gmail.com
Mobile: +86-17551318830
Spot supply
Product Name: Magnesium oxide Visit Supplier Webpage Request for quotationCAS: 1309-48-4
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185
Wechat: chinaskyrun
Product Name: Magnesium oxide Request for quotation
CAS: 1309-48-4
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
CAS: 1309-48-4
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
Multiple SpecificationsSpot supply
Product Name: Magnesium oxide Visit Supplier Webpage Request for quotationCAS: 1309-48-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
View History
encapsulated mgo
2-氨基-3-硝基-6-苯基吡啶
2-丁氧基-4-羟基-5-硝基-6-氨基嘧啶
ARCOSOLV(R) DPNP
3-氨基-2-羟基-6-苯基吡啶
5-硝基-6-氨基-4-羟基嘧啶
2-氯-5-硝基-吡啶-4-醇
3-甲基-1-戊烯基-4-炔基-3-醇
2-羟基-5-碘-3-硝基吡啶
3-碘-2-羟基-5-硝基吡啶
2-氨基-3-硝基-6-苯基吡啶
2-丁氧基-4-羟基-5-硝基-6-氨基嘧啶
ARCOSOLV(R) DPNP
3-氨基-2-羟基-6-苯基吡啶
5-硝基-6-氨基-4-羟基嘧啶
2-氯-5-硝基-吡啶-4-醇
3-甲基-1-戊烯基-4-炔基-3-醇
2-羟基-5-碘-3-硝基吡啶
3-碘-2-羟基-5-硝基吡啶
Raw Materials for encapsulated mgo
Downstream Products for encapsulated mgo