Molecular Formula | C2N2Zn |
Molar Mass | 117.444 |
Density | 1.852 |
Melting Point | 800° dec. |
Boling Point | 25.7°C at 760 mmHg |
Water Solubility | 4.7mg/L at 20℃ |
Solubility | Soluble in alkalies, potassium cyanide and ammonia. Insoluble in water and most solvents. |
Vapor Presure | 0Pa at 25℃ |
Appearance | Crystalline |
Physical and Chemical Properties | Character white glossy orthorhombic columnar crystal, or amorphous powder, or block. relative density 1.852 solubility insoluble in cold water, hydrocyanic acid, ethanol and ether, slightly soluble in hot water, soluble in liquid alkali, ammonia, glacial zinc acetate solution, soluble in sodium cyanide, the potassium cyanide solution forms a double salt. Insoluble in organic acids. |
Use | For electroplating, organic synthesis, pharmaceuticals and pesticides |
Hazard Symbols | T+ - Very toxic N - Dangerous for the environment |
Risk Codes | R26/27/28 - Very toxic by inhalation, in contact with skin and if swallowed. R32 - Contact with acids liberates very toxic gas R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
Safety Description | S28 - After contact with skin, wash immediately with plenty of soap-suds. S29 - Do not empty into drains. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S60 - This material and its container must be disposed of as hazardous waste. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. S7 - Keep container tightly closed. |
Raw Materials | Zinc sulphate Sodium cyanide |
white glossy orthorhombic columnar crystal, or amorphous powder, or block. The relative density was 1. 852. Insoluble in cold water, hydrocyanic acid, ethanol and ether, slightly soluble in hot water, soluble in liquid alkali, ammonia, glacial zinc acetate solution, soluble in sodium cyanide, potassium cyanide solution
Into double salt. Insoluble in organic acids, in dilute inorganic acid decomposition. Decomposition in air at 800 deg C, the release of hydrogen cyanide. Highly toxic!
synthetic sodium cyanide is dissolved in water, and barium chloride is added to remove sodium carbonate impurities; Zinc chloride is dissolved in water, if the solution is turbid, hydrochloric acid is added, and the pH value of 5~6 is adjusted to convert Zn0 into ZIICl2 in the solution. Place the settled zinc chloride clear solution in the reactor and add Cyanogen
The sodium chloride solution causes the reaction to produce a zinc cyanide precipitate. In order to prevent the formation of Na2 Zn( CN)4 double salt solution by dissolving the generated zinc cyanide in excess sodium cyanide solution, the addition amount of sodium cyanide solution should be controlled. The precipitate is rinsed with water to remove sodium chloride, then centrifuged and dried to obtain a finished zinc cyanide.
used in electroplating, organic synthesis, pharmaceutical and pesticide manufacturing.
packed in an iron drum lined with a polyethylene plastic bag with a net weight of 50kg per drum. The package should be marked with "highly toxic drugs. Risk code: toxic and hazardous products. GB6.1 class 61001. Highly toxic GA 58-93 A1013,UN NO. 1713; IMDG CODE (2004 Edition Volume 2)78 pages, category 6.1. See potassium cyanide for the rest.
LogP | -2.31 at 25℃ |