152897-19-3
1,1,3,3-tetramethoxycyclobutane
CAS: 152897-19-3
Molecular Formula: C8H16O4
152897-19-3 - Names and Identifiers
| Name | 1,1,3,3-tetramethoxycyclobutane |
| Synonyms | Butanoicacid,4-chloro-5-oxo- 1,1,3,3-tetramethoxycyclobutane 1,1,3,3-TETRAMETHOXYCYCLOBUTANE Cyclobutane, 1,1,3,3-tetramethoxy- 1,3-Cyclobutanedione bis(dimethyl acetal) |
| CAS | 152897-19-3 |
| InChI | InChI=1/C8H16O4/c1-9-7(10-2)5-8(6-7,11-3)12-4/h5-6H2,1-4H3 |
152897-19-3 - Physico-chemical Properties
| Molecular Formula | C8H16O4 |
| Molar Mass | 176.21 |
| Density | 1.032g/mLat 25°C(lit.) |
| Melting Point | 157-161°C |
| Boling Point | 49°C0.75mm Hg(lit.) |
| Flash Point | 100°F |
| Vapor Presure | 1.36mmHg at 25°C |
| Refractive Index | n20/D 1.425(lit.) |
152897-19-3 - Risk and Safety
| Risk Codes | 10 - Flammable |
| Safety Description | 16 - Keep away from sources of ignition. |
| UN IDs | UN 1993 3/PG 3 |
| WGK Germany | 3 |
152897-19-3 - Introduction
1,1,3,3-tetramethoxycycloutane is an organic compound with the chemical formula C8H18O4.
Nature:
1,1,3,3-tetramethoxycyclobutane is a colorless liquid with a low boiling point and melting point. It is insoluble and soluble in many organic solvents such as ethanol, chlorides, ethers, etc. It has stability and corrosion resistance, and is not prone to chemical reactions at room temperature.
Use:
1,1,3,3-tetramethoxycyclobutane has a wide range of uses in the field of chemistry. It can be used as a solvent for dissolving organic compounds such as polymers, dyes and paints. In addition, it can also be used as a catalyst and intermediate for certain chemical reactions.
Method:
The preparation of 1,1,3,3-tetramethoxycycloutane can be obtained by carrying out methanol substitution reaction on cyclobutane. In particular, Cyclobutane is reacted with an excess of methanol under acidic conditions to produce 1,1, 3,3-tetramethoxycycloutane. The reaction is usually carried out at an appropriate temperature and with some specific catalysts and solvents.
Safety Information:
1,1,3,3-tetramethoxycyclobutane has low toxicity and volatility under normal use conditions. However, during the operation, care should be taken to avoid contact with the skin and eyes to prevent irritation and damage. At the same time, care should be taken to use it under ventilated conditions to avoid its vapor accumulation. If necessary, it should be used under appropriate equipment, such as Cryogenic condensers or explosion-proof equipment. During handling and storage, it should be operated in accordance with safe operating procedures to avoid contact with flammable substances, oxidants and strong acids. In the event of accidental leakage, appropriate methods should be taken to clean up and dispose. It should be noted that this is only general safety information, and the specific use and handling of the situation should refer to the relevant safety data sheet and operating guide.
Nature:
1,1,3,3-tetramethoxycyclobutane is a colorless liquid with a low boiling point and melting point. It is insoluble and soluble in many organic solvents such as ethanol, chlorides, ethers, etc. It has stability and corrosion resistance, and is not prone to chemical reactions at room temperature.
Use:
1,1,3,3-tetramethoxycyclobutane has a wide range of uses in the field of chemistry. It can be used as a solvent for dissolving organic compounds such as polymers, dyes and paints. In addition, it can also be used as a catalyst and intermediate for certain chemical reactions.
Method:
The preparation of 1,1,3,3-tetramethoxycycloutane can be obtained by carrying out methanol substitution reaction on cyclobutane. In particular, Cyclobutane is reacted with an excess of methanol under acidic conditions to produce 1,1, 3,3-tetramethoxycycloutane. The reaction is usually carried out at an appropriate temperature and with some specific catalysts and solvents.
Safety Information:
1,1,3,3-tetramethoxycyclobutane has low toxicity and volatility under normal use conditions. However, during the operation, care should be taken to avoid contact with the skin and eyes to prevent irritation and damage. At the same time, care should be taken to use it under ventilated conditions to avoid its vapor accumulation. If necessary, it should be used under appropriate equipment, such as Cryogenic condensers or explosion-proof equipment. During handling and storage, it should be operated in accordance with safe operating procedures to avoid contact with flammable substances, oxidants and strong acids. In the event of accidental leakage, appropriate methods should be taken to clean up and dispose. It should be noted that this is only general safety information, and the specific use and handling of the situation should refer to the relevant safety data sheet and operating guide.
Last Update：2024-04-10 22:29:15
