2-Benzaldehyde
Trimethylsilyloxybenzaldehyde
CAS: 1078-31-5
Molecular Formula: C10H14O2Si
2-Benzaldehyde - Names and Identifiers
| Name | Trimethylsilyloxybenzaldehyde |
| Synonyms | 2-Benzaldehyde 2-trimethylsiloxybenzaldehyde Trimethylsilyloxybenzaldehyde 2-(Trimethylsiloxy)benzaldehyde 2-(TRIMETHYLSILOXY)BENZALDEHYDE 2-Trimethylsilyloxy-benzaldehyde 2-(TRIMETHYLSILYLOXY)BENZALDEHYDE o-[(trimethylsilyl)oxy]benzaldehyde 2-[(Trimethylsilyl)-oxy]-benzaldehyde Benzaldehyde, 2-[(trimethylsilyl)oxy]- |
| CAS | 1078-31-5 |
| EINECS | 214-081-7 |
| InChI | InChI=1/C10H14O2Si/c1-13(2,3)12-10-7-5-4-6-9(10)8-11/h4-8H,1-3H3 |
2-Benzaldehyde - Physico-chemical Properties
| Molecular Formula | C10H14O2Si |
| Molar Mass | 194.3 |
| Density | 1,013 g/cm3 |
| Boling Point | 116 °C |
| Flash Point | 142°C/25mm |
| Vapor Presure | 0.0729mmHg at 25°C |
| Specific Gravity | 1.013 |
| BRN | 1939281 |
| Storage Condition | Room Temprature |
| Sensitive | 7: reacts slowly with moisture/water |
| Refractive Index | 1.5095 |
| MDL | MFCD00040721 |
2-Benzaldehyde - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/38 - Irritating to eyes and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. |
| TSCA | No |
| Hazard Note | Irritant |
2-Benzaldehyde - Introduction
2-(Trimethylsiloxy) benzaldehyde (abbreviated TMSPA) is an organosilicon compound. The following is a description of the nature, use, method and safety information of TMSPA:
Nature:
-Appearance: Colorless liquid.
-Molecular formula: C11H16O2Si.
-Molecular weight: 212.33g/mol.
-Melting point:-38°C.
-Boiling point: 240-243°C.
-Density: about 0.97 g/mL.
-Solubility: Soluble in organic solvents, such as ethanol and dichloromethane.
Use:
- TMSPA is often used as a reagent in organic synthesis, especially in the preparation of photocrosslinking agents and silicone polymers.
-It is also used in other reactions in organic synthesis, such as the imidazole salt reaction of barker to obtain acid.
- TMSPA has important applications in the synthesis and modification of organosilicon compounds.
Preparation Method:
-The preparation of TMSPA can be obtained by reacting dimethylsilane with oxygen in the presence of a catalyst. The reaction may be carried out in an inert atmosphere, such as nitrogen.
Safety Information:
- TMSPA generally does not cause acute toxicity. However, due to the lack of sufficient toxicity data for reference, it is still necessary to pay attention to safety when using.
-Wear appropriate personal protective equipment such as gloves, glasses and lab coats when in use.
-Avoid contact with skin, eyes and respiratory system. IF YOU CAREFUSE, IMMEDIATELY FLUSH THE AFFECTED AREA WITH LARGE QUANTITY OF WATER.
- TMSPA should be stored in a dry, cool, well-ventilated place, avoiding contact with oxygen and humidity.
Please note that TMSPA is a chemical reagent and must be used under professional guidance and laboratory conditions.
Nature:
-Appearance: Colorless liquid.
-Molecular formula: C11H16O2Si.
-Molecular weight: 212.33g/mol.
-Melting point:-38°C.
-Boiling point: 240-243°C.
-Density: about 0.97 g/mL.
-Solubility: Soluble in organic solvents, such as ethanol and dichloromethane.
Use:
- TMSPA is often used as a reagent in organic synthesis, especially in the preparation of photocrosslinking agents and silicone polymers.
-It is also used in other reactions in organic synthesis, such as the imidazole salt reaction of barker to obtain acid.
- TMSPA has important applications in the synthesis and modification of organosilicon compounds.
Preparation Method:
-The preparation of TMSPA can be obtained by reacting dimethylsilane with oxygen in the presence of a catalyst. The reaction may be carried out in an inert atmosphere, such as nitrogen.
Safety Information:
- TMSPA generally does not cause acute toxicity. However, due to the lack of sufficient toxicity data for reference, it is still necessary to pay attention to safety when using.
-Wear appropriate personal protective equipment such as gloves, glasses and lab coats when in use.
-Avoid contact with skin, eyes and respiratory system. IF YOU CAREFUSE, IMMEDIATELY FLUSH THE AFFECTED AREA WITH LARGE QUANTITY OF WATER.
- TMSPA should be stored in a dry, cool, well-ventilated place, avoiding contact with oxygen and humidity.
Please note that TMSPA is a chemical reagent and must be used under professional guidance and laboratory conditions.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: 2-((Trimethylsilyl)oxy)benzaldehyde Request for quotationCAS: 1078-31-5
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365
Wechat: 18916960931
Product Name: 2-(Trimethylsiloxy)Benzaldehyde Visit Supplier Webpage Request for quotation
CAS: 1078-31-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
CAS: 1078-31-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Spot supply
Product Name: 2-((Trimethylsilyl)oxy)benzaldehyde Request for quotationCAS: 1078-31-5
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365
Wechat: 18916960931
Product Name: 2-(Trimethylsiloxy)Benzaldehyde Visit Supplier Webpage Request for quotation
CAS: 1078-31-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
CAS: 1078-31-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
View History