31255-57-9
3-[2-(3-Chlorophenyl)ethyl]-2-pyridinecarbonitrile
CAS: 31255-57-9
Molecular Formula: C14H11ClN2
31255-57-9 - Names and Identifiers
31255-57-9 - Physico-chemical Properties
| Molecular Formula | C14H11ClN2 |
| Molar Mass | 242.7 |
| Density | 1.23±0.1 g/cm3(Predicted) |
| Melting Point | 71-72°C |
| Boling Point | 375.7±32.0 °C(Predicted) |
| Flash Point | 181°C |
| Vapor Presure | 7.65E-06mmHg at 25°C |
| pKa | -0.15±0.10(Predicted) |
| Storage Condition | Refrigerator |
| Refractive Index | 1.605 |
31255-57-9 - Introduction
3-[2-(3-Chlorophenyl)ethyl]-2-pyridinecarbonitrile is an organic compound with the chemical formula C15H12ClN.
Nature:
-Appearance: colorless crystal or white solid
-Melting point: 78-80 ° C
-Boiling point: 377.6 ° C
-Density: 1.22g/cm³
-Solubility: Soluble in some organic solvents, such as ethanol and chloroform, insoluble in water
Use:
3-[2-(3-Chlorophenyl)ethyl]-2-pyridinecarbonitrile has a wide range of applications, mainly used in the following aspects:
-Chemical intermediate: It can be used as an intermediate for the synthesis of other organic compounds, such as drugs and pesticides.
-Drug research: In the field of drug research, it can be used to synthesize biologically active compounds, such as anti-tumor drugs and antibacterial drugs.
-Pesticide manufacturing: As an intermediate, it can be used to synthesize various types of pesticides.
Method:
The synthesis method of 3-[2-(3-Chlorophenyl)ethyl]-2-pyridinecarbonitrile is more complicated. A common preparation method is to react with acyl chloride and pyridine. The specific steps are as follows:
1. Pyridine is added to the acid chloride and heated to react.
2. Under appropriate conditions, 3-chlorophenyl ethanol is gradually added to the reaction mixture.
3. Continue heating the reaction until product is formed.
4. Filtration and crystallization to obtain pure product.
Safety Information:
3-[2-(3-Chlorophenyl)ethyl]-2-pyridinecarbonitrile has high safety under correct use and storage conditions. However, as an organic compound, it may cause certain harm to the human body and the environment. Therefore, the following safety precautions must be observed when using:
-Avoid direct contact with skin and eyes, and take protective measures if necessary, such as wearing gloves and goggles.
-Use in a well-ventilated place to avoid inhaling its vapor or dust.
-Store away from ignition and oxidizing agents.
-Comply with relevant regulations and safety procedures.
Please note that when using this compound, you should follow accurate operating methods and laboratory safety guidelines, and refer to the correct chemical data sheet and related literature.
Nature:
-Appearance: colorless crystal or white solid
-Melting point: 78-80 ° C
-Boiling point: 377.6 ° C
-Density: 1.22g/cm³
-Solubility: Soluble in some organic solvents, such as ethanol and chloroform, insoluble in water
Use:
3-[2-(3-Chlorophenyl)ethyl]-2-pyridinecarbonitrile has a wide range of applications, mainly used in the following aspects:
-Chemical intermediate: It can be used as an intermediate for the synthesis of other organic compounds, such as drugs and pesticides.
-Drug research: In the field of drug research, it can be used to synthesize biologically active compounds, such as anti-tumor drugs and antibacterial drugs.
-Pesticide manufacturing: As an intermediate, it can be used to synthesize various types of pesticides.
Method:
The synthesis method of 3-[2-(3-Chlorophenyl)ethyl]-2-pyridinecarbonitrile is more complicated. A common preparation method is to react with acyl chloride and pyridine. The specific steps are as follows:
1. Pyridine is added to the acid chloride and heated to react.
2. Under appropriate conditions, 3-chlorophenyl ethanol is gradually added to the reaction mixture.
3. Continue heating the reaction until product is formed.
4. Filtration and crystallization to obtain pure product.
Safety Information:
3-[2-(3-Chlorophenyl)ethyl]-2-pyridinecarbonitrile has high safety under correct use and storage conditions. However, as an organic compound, it may cause certain harm to the human body and the environment. Therefore, the following safety precautions must be observed when using:
-Avoid direct contact with skin and eyes, and take protective measures if necessary, such as wearing gloves and goggles.
-Use in a well-ventilated place to avoid inhaling its vapor or dust.
-Store away from ignition and oxidizing agents.
-Comply with relevant regulations and safety procedures.
Please note that when using this compound, you should follow accurate operating methods and laboratory safety guidelines, and refer to the correct chemical data sheet and related literature.
Last Update：2024-04-09 20:48:19
Supplier List
Featured ProductsSpot supply
Product Name: 3-(3-Chlorophenethyl)picolinonitrile Visit Supplier Webpage Request for quotationCAS: 31255-57-9
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Spot supply
Product Name: 3-(3-Chlorophenethyl)picolinonitrile Request for quotationCAS: 31255-57-9
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365
Wechat: 18916960931
Featured ProductsSpot supply
Product Name: 3-(3-Chlorophenethyl)picolinonitrile Visit Supplier Webpage Request for quotationCAS: 31255-57-9
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Spot supply
Product Name: 3-(3-Chlorophenethyl)picolinonitrile Request for quotationCAS: 31255-57-9
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365
Wechat: 18916960931
View History