(2-Chlorophenyl)(pyridin-3-yl)methanone
(2-Chlorophenyl)(pyridin-3-yl)methanone
CAS: 42374-49-2
Molecular Formula: C12H8ClNO
(2-Chlorophenyl)(pyridin-3-yl)methanone - Names and Identifiers
(2-Chlorophenyl)(pyridin-3-yl)methanone - Physico-chemical Properties
| Molecular Formula | C12H8ClNO |
| Molar Mass | 217.65 |
| Density | 1.260±0.06 g/cm3(Predicted) |
| Boling Point | 354.9±17.0 °C(Predicted) |
| pKa | 2.67±0.10(Predicted) |
| Storage Condition | Room Temprature |
| Sensitive | IRRITANT |
| MDL | MFCD07023033 |
(2-Chlorophenyl)(pyridin-3-yl)methanone - Risk and Safety
| Hazard Class | IRRITANT |
(2-Chlorophenyl)(pyridin-3-yl)methanone - Introduction
(2-Chlorophenyl)(pyridin-3-yl)methanone, also known as 2-chlorophenyl-3-pyridinone, is an organic compound.
Its chemical formula is C13H9ClNO and its molecular weight is 229.67g/mol. This compound exists in the form of white crystals.
The following are some of the properties of (2-Chlorophenyl)(pyridin-3-yl)methanone:
1. Melting point: The melting point of this compound is 108-110 degrees Celsius.
2. Solubility: It is soluble in common organic solvents (such as ethanol and dichloromethane).
3. Stability: This compound is relatively stable under conventional storage conditions, but should avoid excessive temperature and direct sunlight exposure.
For the use of the compound, it can be used as a reaction intermediate or reagent in organic synthesis. It may have anti-tumor, anti-bacterial, anti-inflammatory and anti-viral properties in the field of medicine, but the specific use needs further research.
The method for preparing (2-Chlorophenyl)(pyridin-3-yl)methanone can be obtained by reacting 2-chlorophenyl-3-pyridinecarbonyl chloride with an appropriate acylating agent or acylating reagent under basic conditions.
When using or handling (2-Chlorophenyl)(pyridin-3-yl)methanone, you need to pay attention to the following safety information:
1. Pay attention to personal protective measures: wear chemical protective gloves, goggles and protective clothing during operation. Avoid inhalation, ingestion or contact with skin.
2. Ensure good ventilation: During operation, ensure good ventilation conditions or use exhaust equipment in the laboratory.
3. Avoid fire and high temperature: This compound may be flammable and should be kept away from fire and high temperature areas.
4. Storage conditions: The compound should be stored in a dry, cool place, away from oxidants and acids.
5. Waste disposal: When disposing of waste, local regulations should be observed and appropriate protective measures should be taken.
Please note that the use of any chemical substance requires caution and compliance with relevant safety guidelines. Before using or handling the compound, make sure you have relevant chemical knowledge or consult with a professional.
Its chemical formula is C13H9ClNO and its molecular weight is 229.67g/mol. This compound exists in the form of white crystals.
The following are some of the properties of (2-Chlorophenyl)(pyridin-3-yl)methanone:
1. Melting point: The melting point of this compound is 108-110 degrees Celsius.
2. Solubility: It is soluble in common organic solvents (such as ethanol and dichloromethane).
3. Stability: This compound is relatively stable under conventional storage conditions, but should avoid excessive temperature and direct sunlight exposure.
For the use of the compound, it can be used as a reaction intermediate or reagent in organic synthesis. It may have anti-tumor, anti-bacterial, anti-inflammatory and anti-viral properties in the field of medicine, but the specific use needs further research.
The method for preparing (2-Chlorophenyl)(pyridin-3-yl)methanone can be obtained by reacting 2-chlorophenyl-3-pyridinecarbonyl chloride with an appropriate acylating agent or acylating reagent under basic conditions.
When using or handling (2-Chlorophenyl)(pyridin-3-yl)methanone, you need to pay attention to the following safety information:
1. Pay attention to personal protective measures: wear chemical protective gloves, goggles and protective clothing during operation. Avoid inhalation, ingestion or contact with skin.
2. Ensure good ventilation: During operation, ensure good ventilation conditions or use exhaust equipment in the laboratory.
3. Avoid fire and high temperature: This compound may be flammable and should be kept away from fire and high temperature areas.
4. Storage conditions: The compound should be stored in a dry, cool place, away from oxidants and acids.
5. Waste disposal: When disposing of waste, local regulations should be observed and appropriate protective measures should be taken.
Please note that the use of any chemical substance requires caution and compliance with relevant safety guidelines. Before using or handling the compound, make sure you have relevant chemical knowledge or consult with a professional.
Last Update：2024-04-09 21:21:28
