(2S)-2-bromo-2,3-dihydroinden-1-one - Names and Identifiers
(2S)-2-bromo-2,3-dihydroinden-1-one - Physico-chemical Properties
Molecular Formula | C9H7BrO
|
Molar Mass | 211.06 |
Density | 1.4270 (rough estimate) |
Melting Point | 33-38 °C (lit.) |
Boling Point | 110-112 °C/0.4 mmHg (lit.) |
Flash Point | 110-112°C/0.4mm |
Vapor Presure | 0.00308mmHg at 25°C |
BRN | 637789 |
Refractive Index | 1.5720 (estimate) |
(2S)-2-bromo-2,3-dihydroinden-1-one - Risk and Safety
Hazard Symbols | C - Corrosive
|
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin.
R34 - Causes burns
|
Safety Description | S24/25 - Avoid contact with skin and eyes.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S27 - Take off immediately all contaminated clothing.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
|
UN IDs | UN 1759 |
WGK Germany | 3 |
HS Code | 29147000 |
(2S)-2-bromo-2,3-dihydroinden-1-one - Introduction
2-Bromo-1-indanone(2-Bromanthraquinone) is an organic compound with the chemical formula C14H7BrO2. The following is a description of the properties, uses, formulation and safety information of 2-Bromo-1-indanone:
Nature:
2-Bromo-1-indanone is a yellow solid with a special smell. It is less soluble and can be dissolved in organic solvents. It is a hygroscopic compound and should be kept under dry conditions.
Use:
2-Bromo-1-indanone is mainly used as an oxidant in organic synthesis. It can be used to synthesize chemicals such as dyes, pigments and pharmaceutical intermediates. It is also used in certain areas of photosensitive materials and electronic devices.
Method:
The preparation of 2-Bromo-1-indanone can usually be achieved by the reaction of indanone and bromine. The reaction conditions include a suitable solvent and a suitable reaction temperature. The synthesis method can be adapted to specific needs.
Safety Information:
2-Bromo-1-indanone needs to be safe during operation and storage. It is an irritating compound that may cause irritation to the eyes, skin and respiratory system. Avoid direct contact during use and wear protective gloves, goggles and respiratory protection if necessary. Avoid inhaling the dust or vapor of the solution during handling. In addition, 2-Bromo-1-indanone should be stored properly, protected from light, dry and well ventilated conditions.
Last Update:2024-04-09 20:52:54