(4-bromo-2-fluoro-phenyl)-iodo-zinc
(4-bromo-2-fluoro-phenyl)-iodo-zinc
CAS: 352530-44-0
Molecular Formula: C6H3BrFIZn
(4-bromo-2-fluoro-phenyl)-iodo-zinc - Names and Identifiers
| Name | (4-bromo-2-fluoro-phenyl)-iodo-zinc |
| Synonyms | 2-Fluoro-4-bromophenylzinc iodide 4-BROMO-2-FLUOROPHENYLZINC IODIDE (4-bromo-2-fluoro-phenyl)-iodo-zinc 4-BROMO-2-FLUOROPHENYLZINC IODIDE, 0.5M 4-bromo-2-fluorophenylzinc iodide solution 4-Bromo-2-fluorophenylzinc iodide solution 0.5 in THF 4-BroMo-2-fluorophenylzinc iodide solution 0.5 M in THF 4-BroMo-2-fluorophenylzinc iodide, 0.5 M solution in THF, SpcSeal |
| CAS | 352530-44-0 |
| InChI | InChI=1/C6H3BrF.HI.Zn/c7-5-2-1-3-6(8)4-5;;/h1-2,4H;1H;/q;;+1/p-1/rC6H3BrFIZn/c7-4-1-2-6(10-9)5(8)3-4/h1-3H |
(4-bromo-2-fluoro-phenyl)-iodo-zinc - Physico-chemical Properties
| Molecular Formula | C6H3BrFIZn |
| Molar Mass | 366.28 |
| Density | 1.016g/mLat 25°C |
| Boling Point | 65°C |
| Flash Point | 1°F |
| Exposure Limit | ACGIH: TWA 50 ppm; STEL 100 ppm (Skin)OSHA: TWA 200 ppm(590 mg/m3)NIOSH: IDLH 2000 ppm; TWA 200 ppm(590 mg/m3); STEL 250 ppm(735 mg/m3) |
| Storage Condition | 2-8°C |
(4-bromo-2-fluoro-phenyl)-iodo-zinc - Risk and Safety
| Risk Codes | R11 - Highly Flammable R19 - May form explosive peroxides R23/24/25 - Toxic by inhalation, in contact with skin and if swallowed. R36/37/38 - Irritating to eyes, respiratory system and skin. R40 - Limited evidence of a carcinogenic effect R36/37 - Irritating to eyes and respiratory system. |
| Safety Description | S16 - Keep away from sources of ignition. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 - After contact with skin, wash immediately with plenty of soap-suds. S33 - Take precautionary measures against static discharges. S36/37 - Wear suitable protective clothing and gloves. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| UN IDs | UN 2056 3/PG 2 |
| WGK Germany | 1 |
| Hazard Note | Flammable |
(4-bromo-2-fluoro-phenyl)-iodo-zinc - Introduction
(4-bromo-2-fluoro-phenyl)-iodo-zinc is an organic compound whose chemical formula is C6H4BrFIZn. The following is a description of the properties, uses, preparation and safety information of the compound:
Nature:
-Appearance:(4-bromo-2-fluoro-phenyl)-The iodo-zinc is a colorless to pale yellow solid.
-Melting point: The melting point of the compound is 60-62 degrees Celsius.
-Solubility: It can be dissolved in organic solvents (such as dichloromethane, dimethyl sulfoxide).
Use:
- (4-bromo-2-fluoro-phenyl)-iodo-zinc is often used as a reagent in organic synthesis, especially in catalytic reactions.
-It can be used to synthesize compounds with specific structures, such as pyrazole, hydrazine and thiazine.
Preparation Method:
-can be prepared by reacting zinc iodide with 4-bromo-2-fluorophenylboronic acid or other 4-bromo-2-fluorophenyl compounds.
Safety Information:
- (4-bromo-2-fluoro-phenyl)-iodo-zinc is relatively safe under correct use. However, because it is an organic compound, conventional laboratory safety measures should be followed when handling.
-Avoid contact with skin, eyes, mouth and nose, and other mucous membranes, and avoid inhaling dust or gas.
-Wear appropriate personal protective equipment such as lab gloves, goggles, and lab coats when using or handling the compound.
-If ingested by mistake or contact occurs, seek medical attention immediately and provide the compound's safety data sheet (MSDS) to your doctor for reference.
The above information is for reference only. When using this compound, please carefully read and follow the recommendations and warnings in its safety data sheet.
Nature:
-Appearance:(4-bromo-2-fluoro-phenyl)-The iodo-zinc is a colorless to pale yellow solid.
-Melting point: The melting point of the compound is 60-62 degrees Celsius.
-Solubility: It can be dissolved in organic solvents (such as dichloromethane, dimethyl sulfoxide).
Use:
- (4-bromo-2-fluoro-phenyl)-iodo-zinc is often used as a reagent in organic synthesis, especially in catalytic reactions.
-It can be used to synthesize compounds with specific structures, such as pyrazole, hydrazine and thiazine.
Preparation Method:
-can be prepared by reacting zinc iodide with 4-bromo-2-fluorophenylboronic acid or other 4-bromo-2-fluorophenyl compounds.
Safety Information:
- (4-bromo-2-fluoro-phenyl)-iodo-zinc is relatively safe under correct use. However, because it is an organic compound, conventional laboratory safety measures should be followed when handling.
-Avoid contact with skin, eyes, mouth and nose, and other mucous membranes, and avoid inhaling dust or gas.
-Wear appropriate personal protective equipment such as lab gloves, goggles, and lab coats when using or handling the compound.
-If ingested by mistake or contact occurs, seek medical attention immediately and provide the compound's safety data sheet (MSDS) to your doctor for reference.
The above information is for reference only. When using this compound, please carefully read and follow the recommendations and warnings in its safety data sheet.
Last Update：2024-04-10 22:29:15
