(6-Bromohexyloxy)-tert-butyldimethylsilane
(6-Bromohexyloxy)-tert-butyldimethylsilane
CAS: 129368-70-3
Molecular Formula: C12H27BrOSi
(6-Bromohexyloxy)-tert-butyldimethylsilane - Names and Identifiers
(6-Bromohexyloxy)-tert-butyldimethylsilane - Physico-chemical Properties
| Molecular Formula | C12H27BrOSi |
| Molar Mass | 295.33 |
| Density | 1.053 g/mL at 25 °C (lit.) |
| Boling Point | 276 °C (lit.) |
| Flash Point | >230°F |
| Appearance | Liquid |
| Color | Colorless |
| Refractive Index | n20/D 1.4565(lit.) |
(6-Bromohexyloxy)-tert-butyldimethylsilane - Risk and Safety
| WGK Germany | 3 |
(6-Bromohexyloxy)-tert-butyldimethylsilane - Introduction
(6-Bromohexyloxy)-tert-butyldimethylsilane is an organosilicon compound with the chemical formula C10H23BrOSi. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance: colorless liquid
-Boiling point: about 190-192 degrees Celsius
-Density: about 1.00g/cm³
-Solubility: Soluble in organic solvents, such as ether and toluene, insoluble in water.
Use:
- (6-Bromohexyloxy)-tert-butyldimethylsilane can be used as a reagent in organic synthesis.
-It can be used as a silicon-based reagent in organic synthesis reactions to introduce silicon-based functional groups.
-In coordination chemistry, it can be used as a ligand.
Preparation Method:
(6-Bromohexyloxy)-The preparation of tert-butyldimethylsilane is usually carried out by the following steps:
1. Reaction of hexanol and hydrochloric acid to obtain hexyloxy chloride.
2. (6-bromohexyloxy)-hexane is obtained by reacting hexyloxy chloride with stannous bromide.
3. (6-Bromohexyloxy)-hexane is reacted with dimethyl tert-butylchlorosilane to obtain (6-Bromohexyloxy)-tert-butyldimethylsilane.
Safety Information:
- (6-Bromohexyloxy)-tert-butyldimethylsilane are organic compounds and must be used in accordance with general laboratory safety procedures.
-It may cause irritation and damage to the eyes, skin and respiratory system, so use protective gloves, goggles and protective masks.
-avoid inhalation of its steam and dust, try to operate in a well-ventilated place.
-If exposed or inhaled, rinse immediately with plenty of water and seek medical help.
-in storage, it should be kept in a cool, dry place away from heat and fire sources, avoid contact with oxidants and acids.
-Detailed safety information can be found in the substance's Safety Data Sheet (MSDS).
Nature:
-Appearance: colorless liquid
-Boiling point: about 190-192 degrees Celsius
-Density: about 1.00g/cm³
-Solubility: Soluble in organic solvents, such as ether and toluene, insoluble in water.
Use:
- (6-Bromohexyloxy)-tert-butyldimethylsilane can be used as a reagent in organic synthesis.
-It can be used as a silicon-based reagent in organic synthesis reactions to introduce silicon-based functional groups.
-In coordination chemistry, it can be used as a ligand.
Preparation Method:
(6-Bromohexyloxy)-The preparation of tert-butyldimethylsilane is usually carried out by the following steps:
1. Reaction of hexanol and hydrochloric acid to obtain hexyloxy chloride.
2. (6-bromohexyloxy)-hexane is obtained by reacting hexyloxy chloride with stannous bromide.
3. (6-Bromohexyloxy)-hexane is reacted with dimethyl tert-butylchlorosilane to obtain (6-Bromohexyloxy)-tert-butyldimethylsilane.
Safety Information:
- (6-Bromohexyloxy)-tert-butyldimethylsilane are organic compounds and must be used in accordance with general laboratory safety procedures.
-It may cause irritation and damage to the eyes, skin and respiratory system, so use protective gloves, goggles and protective masks.
-avoid inhalation of its steam and dust, try to operate in a well-ventilated place.
-If exposed or inhaled, rinse immediately with plenty of water and seek medical help.
-in storage, it should be kept in a cool, dry place away from heat and fire sources, avoid contact with oxidants and acids.
-Detailed safety information can be found in the substance's Safety Data Sheet (MSDS).
Last Update：2024-04-10 22:29:15
