(silanetetrayltetraethane-2,1-diyl)tetrakis(trichlorosilane) - Names and Identifiers
(silanetetrayltetraethane-2,1-diyl)tetrakis(trichlorosilane) - Physico-chemical Properties
Molecular Formula | C8H16Cl12Si5
|
Molar Mass | 678.08 |
Density | 1.425g/cm3 |
Melting Point | 49-51°C |
Boling Point | 165-195°C 0,2mm |
Flash Point | >65°C |
Vapor Presure | 0mmHg at 25°C |
Sensitive | 8: reacts rapidly with moisture, water, protic solvents |
Refractive Index | 1.504 |
(silanetetrayltetraethane-2,1-diyl)tetrakis(trichlorosilane) - Risk and Safety
Risk Codes | 34 - Causes burns
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
UN IDs | 2987 |
TSCA | No |
(silanetetrayltetraethane-2,1-diyl)tetrakis(trichlorosilane) - Introduction
(silanetetrayltetraethane-2,1-diyl)tetrakis(trichlorosilane)((silanetetrayltetraethane-2,1-diyl)tetrakis(trichlorosilane)) is an organosilicon compound. Its chemical formula is C8H16Cl12Si4.
The properties of this compound are as follows:
-Appearance: colorless liquid
-Boiling point: about 160-180 ℃
-Density: about 1.48 g/mL
-Melting point: about -55 ℃
-Thermal stability: it can decompose at high temperature to produce corrosive gas
(silanetetrayltetraethane-2,1-diyl)tetrakis(trichlorosilane) is mainly used for the synthesis of organosilicon compounds and surface modification of materials. It can be used as a silane coupling agent to improve the bonding properties of certain materials, such as rubber products and coatings.
The compound can be obtained by the following synthetic methods:
First, methyltrioxysilane ((CH3) 3Si-O−) and 2-trichloromethylethylsilane chloride (ClSi(CH2CH3)SiCl3) are reacted to produce (silanetetrayltetraethane-2,1-diyl)tetrakis(trichlorosilane).
Regarding safety information,(silanetetrayltetraethane-2,1-diyl)tetrakis(trichlorosilane) is an irritating compound that may irritate the eyes and skin. Wear appropriate protective equipment such as protective gloves and goggles during use. At the same time, make sure to operate in a well-ventilated environment to avoid its vapor inhalation. If you come into contact with this substance, rinse immediately with plenty of water and seek medical help. When stored, it should be kept away from ignition sources and other combustible materials.
Last Update:2024-04-10 22:29:15