Introduction | 1,1,2, 2-tetrafluoroethyl-2, 2,3, 3-tetrafluoropropyl ether (HFE-458) is a hydrofluoroether. Hydrofluoroethers are a new alternative to chlorofluorocarbons (CFCs), with Zero ODP, low GWP and short atmospheric residence time, and are considered to be one of the ideal alternatives to CFCs. |
preparation | a 10L autoclave was evacuated, replaced with monomer once, and evacuated to-0.1MPa, then 2kg of tetrafluoropropanol was added, 4kg of sodium tetrafluoropropanol solution (the mass fraction of sodium tetrafluoropropanol is 25%), then add the monomer to 0.4MPa, stir and raise the temperature to about 85 ℃, start adding the monomer to the storage tank pressure of 0.75MPa, at the same time, the temperature of the kettle was controlled at about 85 °c. When the pressure in the kettle drops to 0.5MPa, the monomer is added again to the tank pressure for 2 hours, then the monomer is continuously added, and the reaction is continued for 5 hours, cooling, discharging and weighing, A total of 3.75 of monomer was added. The discharged material is added to the rectification kettle for rectification, and the material with the top temperature of 93~94 ° C is 1,1,2, 2-tetrafluoroethyl-2, 2,3, the purity of the product was 98.5% and the yield of the product was 80.5%. |