1,2-dichloro-3,3,4,4,5,5-hexafluorocyclopentene - Names and Identifiers
Name | 4-(trifluoromethoxy)toluene
|
Synonyms | 4-Trifluoromethoxytoluene P-(TRIFLUOROMETHOXY)TOLUENE 4-(trifluoromethoxy)toluene 4-(TRIFLUOROMETHOXY)TOLUENE Trifluoromethoxytoluene 4()- 4-TOLUENE TRIFLUOROMETHYL ETHER 1-METHYL-4-(TRIFLUOROMETHOXY)BENZENE 1-methyl-4-(trifluoromethoxy)benzene 4-methyl-alpha,alpha,alpha-trifluoroanisole 1,2-dichloro-3,3,4,4,5,5-hexafluorocyclopentene
|
CAS | 706-27-4
|
EINECS | 211-895-4 |
InChI | InChI=1/C8H7F3O/c1-6-2-4-7(5-3-6)12-8(9,10)11/h2-5H,1H3 |
1,2-dichloro-3,3,4,4,5,5-hexafluorocyclopentene - Physico-chemical Properties
Molecular Formula | C8H7F3O
|
Molar Mass | 176.14 |
Density | 1.179g/mLat 25°C(lit.) |
Boling Point | 134-135°C(lit.) |
Flash Point | 87°F |
Vapor Presure | 10.1mmHg at 25°C |
Appearance | clear liquid |
Specific Gravity | 1.179 |
Color | Colorless to Almost colorless |
Storage Condition | Sealed in dry,Room Temperature |
Refractive Index | n20/D 1.416(lit.) |
MDL | MFCD00042413 |
1,2-dichloro-3,3,4,4,5,5-hexafluorocyclopentene - Risk and Safety
Hazard Symbols | Xi - Irritant
|
Risk Codes | R10 - Flammable
R36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S16 - Keep away from sources of ignition.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 - Wear suitable protective clothing.
|
UN IDs | UN 1993 3/PG 3 |
WGK Germany | 3 |
HS Code | 29093090 |
Hazard Note | Irritant |
Hazard Class | 3 |
Packing Group | III |
1,2-dichloro-3,3,4,4,5,5-hexafluorocyclopentene - Introduction
4-(trifluoromethoxy)toluene(4-(trifluoromethoxy)toluene) is an organic compound with the following properties and uses:
Nature:
-Appearance: colorless liquid
-Molecular formula: C8H7F3O
-Molecular weight: 188.14g/mol
-Melting point:-30°C
-Boiling Point: 164-165°C
-Density: 1.29g/cm3
Use:
- 4-(trifluoromethoxy)toluene are often used as reagents and intermediates in organic synthesis, and can be used in the synthesis of drugs, pesticides and special chemicals.
-It can also be used as a synthetic raw material for dyes and fragrances.
Preparation Method:
- 4-(trifluoromethoxy)toluene is prepared by many methods. A common method is to react toluene and fluorine methyl ether under the catalysis of ferric chloride.
Safety Information:
- 4-(trifluoromethoxy)toluene has an irritating effect on the skin, and should be rinsed with plenty of water immediately after contact. Wear appropriate personal protective equipment such as goggles, gloves and protective clothing during use.
-It is combustible, should avoid contact with open flame and high temperature, and stored in a cool, ventilated place.
-Please carefully read and follow the safety instructions on the relevant Material Safety Data Sheet (MSDS) when using.
Last Update:2024-04-09 02:00:47