1,3-BIS(3-METHACRYLOXYPROPYL)TETRAKIS(TRIMETHYLSILOXY)DISILOXANE
3-(5,5,5-trimethyl-3-{3-[(2-methylacryloyl)oxy]propyl}-1,1,3-tris[(trimethylsilyl)oxy]trisiloxanyl)propyl 2-methylprop-2-enoate (non-preferred name)
CAS: 80722-63-0
Molecular Formula: C26H58O9Si6
1,3-BIS(3-METHACRYLOXYPROPYL)TETRAKIS(TRIMETHYLSILOXY)DISILOXANE - Names and Identifiers
1,3-BIS(3-METHACRYLOXYPROPYL)TETRAKIS(TRIMETHYLSILOXY)DISILOXANE - Physico-chemical Properties
| Molecular Formula | C26H58O9Si6 |
| Molar Mass | 683.25 |
| Density | 0.99 |
| Boling Point | >150°C 1mm |
| Flash Point | >100°C |
| Vapor Presure | 1.34E-11mmHg at 25°C |
| Specific Gravity | 0.99 |
| Storage Condition | Sealed in dry,2-8°C |
| Sensitive | 3: reacts with aqueous base |
| Refractive Index | 1.4320 |
1,3-BIS(3-METHACRYLOXYPROPYL)TETRAKIS(TRIMETHYLSILOXY)DISILOXANE - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 - After contact with skin, wash immediately with plenty of soap-suds. S37/39 - Wear suitable gloves and eye/face protection S36 - Wear suitable protective clothing. |
| TSCA | No |
1,3-BIS(3-METHACRYLOXYPROPYL)TETRAKIS(TRIMETHYLSILOXY)DISILOXANE - Introduction
3-(5,5, 5-trimethy1-3-{3-[(2-methylacryloyl)oxy] proxy} -1,3-tris[(trimethylsilyl)oxy]trisiloxanyl) proxy 2-methylprop-2-enoate (non-preferred name) (3-(5,5, 5-trimethyloyl, 2-xy1] {3-[(acyloyl)}, 3-tris[(trimethylsilyl)oxy]trisiloxanyl)propyl 2-methylprop-2-enoate) is an organosilicon compound. The following is a description of its nature, use, preparation and safety information:
Nature:
3-(5,5,5-trimethyl-3-{3-[(2-methylacryloyl)oxy]propyl}-1,1,3-tris[(trimethylsilyl)oxy]trisiloxanyl)propyl 2-methylprop-2-enoate (non-preferred name) is a colorless, transparent liquid with low viscosity and low surface tension. It is soluble in most organic solvents at room temperature, but insoluble in water.
Use:
This compound is usually used as an additive in applications such as crosslinking agents, coatings, adhesives, sealants and modifiers. It has excellent heat resistance, chemical resistance and excellent electrical insulation properties, so it has a wide range of applications in the fields of electronics, aerospace, automotive and construction.
Preparation Method:
The preparation of 3-(5,5,5-trimethyl-3-{3-[(2-methylacryloyl)oxy] proxy}-1,1,3-tris[(trimethylsilyl)oxy]trisiloxanyl) proxy 2-methylprop-2-enoate (non-preferred name) can be carried out by an organic synthesis method. The specific preparation process can be optimized as needed, but usually involves a series of chemical reactions, combinations and purification steps.
Safety Information:
Due to the lack of specific safety information, specific safety measures need to be formulated according to actual usage and relevant regulations. Wear appropriate protective equipment such as gloves, goggles, and protective clothing when handling the compound. Avoid contact with skin and eyes, and make sure to operate in a well-ventilated area. When it is necessary to dispose of waste, the relevant waste disposal regulations should be observed.
Nature:
3-(5,5,5-trimethyl-3-{3-[(2-methylacryloyl)oxy]propyl}-1,1,3-tris[(trimethylsilyl)oxy]trisiloxanyl)propyl 2-methylprop-2-enoate (non-preferred name) is a colorless, transparent liquid with low viscosity and low surface tension. It is soluble in most organic solvents at room temperature, but insoluble in water.
Use:
This compound is usually used as an additive in applications such as crosslinking agents, coatings, adhesives, sealants and modifiers. It has excellent heat resistance, chemical resistance and excellent electrical insulation properties, so it has a wide range of applications in the fields of electronics, aerospace, automotive and construction.
Preparation Method:
The preparation of 3-(5,5,5-trimethyl-3-{3-[(2-methylacryloyl)oxy] proxy}-1,1,3-tris[(trimethylsilyl)oxy]trisiloxanyl) proxy 2-methylprop-2-enoate (non-preferred name) can be carried out by an organic synthesis method. The specific preparation process can be optimized as needed, but usually involves a series of chemical reactions, combinations and purification steps.
Safety Information:
Due to the lack of specific safety information, specific safety measures need to be formulated according to actual usage and relevant regulations. Wear appropriate protective equipment such as gloves, goggles, and protective clothing when handling the compound. Avoid contact with skin and eyes, and make sure to operate in a well-ventilated area. When it is necessary to dispose of waste, the relevant waste disposal regulations should be observed.
Last Update：2024-04-09 20:49:11
Supplier List
Product Name: 1,3-BIS(3-METHACRYLOXYPROPYL)TETRAKIS(TRIMETHYLSILOXY)DISILOXANE Visit Supplier Webpage Request for quotation
CAS: 80722-63-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 80722-63-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: 1,3-BIS(3-METHACRYLOXYPROPYL)TETRAKIS(TRIMETHYLSILOXY)DISILOXANE Visit Supplier Webpage Request for quotation
CAS: 80722-63-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 80722-63-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History