1,3-Dichloro-2-Methoxy-5-Nitro
1,3-dichloro-2-methoxy-5-nitrobenzene
CAS: 17742-69-7
Molecular Formula: C7H5Cl2NO3
1,3-Dichloro-2-Methoxy-5-Nitro - Names and Identifiers
| Name | 1,3-dichloro-2-methoxy-5-nitrobenzene |
| Synonyms | 4-Nitro-2,6-dichloroanisole 2,6-DICHLORO-4-NITROANISOLE 2,6-dichloro-4-nitroanisole 1,3-Dichloro-2-Methoxy-5-Nitro 3,5-Dichloro-4-methoxynitrobenzene 1,3-dichloro-2-methoxy-5-nitrobenzene 1,3-DICHLORO-2-METHOXY-5-NITROBENZENE Methyl-(2.6-dichlor-4-nitro-phenyl)-aether |
| CAS | 17742-69-7 |
| EINECS | 403-350-6 |
| InChI | InChI=1/C7H5Cl2NO3/c1-13-7-5(8)2-4(10(11)12)3-6(7)9/h2-3H,1H3 |
1,3-Dichloro-2-Methoxy-5-Nitro - Physico-chemical Properties
| Molecular Formula | C7H5Cl2NO3 |
| Molar Mass | 222.03 |
| Density | 1.5223 (rough estimate) |
| Melting Point | 97-100 °C |
| Boling Point | 305.6±37.0 °C(Predicted) |
| Flash Point | 160 °C |
| Water Solubility | 26 mg l-1 (e) |
| Solubility | DMSO (Sparingly), Chloroform (Slightly) |
| Vapor Presure | 0.00147mmHg at 25°C |
| Appearance | Solid |
| Color | Pale Yellow to Yellow |
| Storage Condition | Sealed in dry,Room Temperature |
| Refractive Index | 1.6140 (estimate) |
1,3-Dichloro-2-Methoxy-5-Nitro - Risk and Safety
| Hazard Symbols | N - Dangerous for the environment T,T,N - |
| Risk Codes | R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R25 - Toxic if swallowed |
| Safety Description | S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S36/37 - Wear suitable protective clothing and gloves. |
| UN IDs | 2811 |
| HS Code | 29049095 |
| Hazard Note | Toxic |
| Hazard Class | IRRITANT |
| Packing Group | III |
1,3-Dichloro-2-Methoxy-5-Nitro - Introduction
1, is an organic compound whose chemical formula is C8H5Cl2NO3. The following is an introduction to its nature, use, preparation and safety information:
Nature:
- 1, colorless crystal or light yellow solid.
-Its melting point is 86-87°C.
-The compound is insoluble in water, but soluble in organic solvents such as alcohols and ethers.
-It is a flammable substance and should avoid fire and high temperature.
Use:
- 1, widely used in the manufacture of pesticides and insecticides. It has antibacterial and insecticidal properties, and has a good control effect on different types of pests and pathogens.
Method:
- 1, the preparation method of aniseed ether can be obtained by reacting aniseed ether with thionyl chloride (SO2Cl2) in the presence of potassium carbonate (K2CO3). The reaction conditions are generally carried out at room temperature.
Safety Information:
- 1, is a toxic substance that may be harmful to human health by contact or inhalation.
-After contact, rinse the affected skin area immediately with plenty of water. Do not contact the eyes and mucous membranes.
-Wear protective gloves, goggles and respiratory protection to ensure adequate ventilation when using or handling the substance.
-The substance should be stored in a cool, dry, ventilated place, away from fire and flammable substances.
-Personnel working with the substance should be regularly monitored for health and follow relevant safety procedures.
Nature:
- 1, colorless crystal or light yellow solid.
-Its melting point is 86-87°C.
-The compound is insoluble in water, but soluble in organic solvents such as alcohols and ethers.
-It is a flammable substance and should avoid fire and high temperature.
Use:
- 1, widely used in the manufacture of pesticides and insecticides. It has antibacterial and insecticidal properties, and has a good control effect on different types of pests and pathogens.
Method:
- 1, the preparation method of aniseed ether can be obtained by reacting aniseed ether with thionyl chloride (SO2Cl2) in the presence of potassium carbonate (K2CO3). The reaction conditions are generally carried out at room temperature.
Safety Information:
- 1, is a toxic substance that may be harmful to human health by contact or inhalation.
-After contact, rinse the affected skin area immediately with plenty of water. Do not contact the eyes and mucous membranes.
-Wear protective gloves, goggles and respiratory protection to ensure adequate ventilation when using or handling the substance.
-The substance should be stored in a cool, dry, ventilated place, away from fire and flammable substances.
-Personnel working with the substance should be regularly monitored for health and follow relevant safety procedures.
Last Update：2024-04-10 22:29:15
