1,4-Difluoro-2-isothiocyanatobenzene - Names and Identifiers
1,4-Difluoro-2-isothiocyanatobenzene - Physico-chemical Properties
Molecular Formula | C7H5BrClF
|
Molar Mass | 223.47 |
Density | 1.654±0.06 g/cm3(Predicted) |
Melting Point | 30-33℃ |
Boling Point | 227.1±25.0 °C(Predicted) |
Flash Point | 91.1°C |
Solubility | soluble in Methanol |
Vapor Presure | 0.119mmHg at 25°C |
Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
Sensitive | Lachrymatory |
Refractive Index | 1.561 |
1,4-Difluoro-2-isothiocyanatobenzene - Risk and Safety
Hazard Symbols | C - Corrosive
|
Risk Codes | 34 - Causes burns
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
|
UN IDs | 3261 |
HS Code | 29039990 |
Hazard Note | Corrosive/Lachrymatory |
Hazard Class | CORROSIVE |
Packing Group | Ⅱ |
1,4-Difluoro-2-isothiocyanatobenzene - Introduction
3-fluoro-4-chorobenzyl bromide, chemical formula C7H4ClFBr, is an organic compound. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance: colorless liquid or crystal.
-Solubility: Soluble in organic solvents such as ethanol and dimethylformamide.
-Melting point: About 50-60 degrees Celsius.
-Boiling point: About 220-230 degrees Celsius.
Use:
-3-fluoro-4-chloride bromide is an important raw material in organic synthesis. It can be used as a ligand of metal catalyst and participate in organic synthesis reaction.
-It can also be used for research and development in the pharmaceutical field, for the synthesis of drugs or pharmaceutical intermediates.
Method:
-A common preparation method is to react 3-fluorobenzyl alcohol with hydrogen oxide to prepare 3-fluorobenzaldehyde, the 3-fluorobenzaldehyde is then reacted with dibromomethane to give 3-fluoro-4-bromobenzaldehyde. Finally, 3-fluoro-4-bromobenzaldehyde was converted to 3-Fluoro-4-chlorobenzyl bromide by chlorination.
Safety Information:
- 3-Fluoro-4-chlorobenzyl bromide should be operated in a well-ventilated place to avoid inhalation or contact.
-Wear protective gloves, goggles and protective clothing when using.
-Avoid contact with skin and eyes. In case of accidental contact, rinse immediately with plenty of water and seek medical help.
-Avoid contact with oxidants and high-temperature substances during use and storage to avoid chemical reactions and fires.
-Please store, transport and handle in accordance with relevant laws and regulations.
Last Update:2024-04-09 21:00:56