1-Bromo-2-chloro-4-methylbenzene - Names and Identifiers
1-Bromo-2-chloro-4-methylbenzene - Physico-chemical Properties
Molecular Formula | C7H6BrCl
|
Molar Mass | 205.48 |
Density | 1.54 |
Boling Point | 100 °C |
Flash Point | 106℃ |
Vapor Presure | 0.091mmHg at 25°C |
Specific Gravity | 1.54 |
Storage Condition | Sealed in dry,Room Temperature |
Refractive Index | 1.566 |
1-Bromo-2-chloro-4-methylbenzene - Risk and Safety
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin.
R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R22 - Harmful if swallowed
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S61 - Avoid release to the environment. Refer to special instructions / safety data sheets.
|
UN IDs | UN2811 |
Hazard Class | IRRITANT |
1-Bromo-2-chloro-4-methylbenzene - Introduction
4-Bromo-3-chrootoluene (4-Bromo-3-chrootoluene) is an organic compound with the chemical formula C7H6BrCl. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: 4-Bromo-3-chrootoluene is a colorless to light yellow solid with a special smell.
-Melting point: about -3 ℃.
-Boiling point: about 243 ℃.
-Density: about 1.54g/cm³.
-Solubility: Soluble in hydrocarbon solvents, slightly soluble in alcohol solvents.
Use:
- 4-Bromo-3-chlorotoluene can be used in the field of organic synthesis, as an important intermediate compound, for the synthesis of other organic compounds.
-It can be used in the fields of pesticides, medicines, dyes and chemicals, and is used as a reaction reagent in the synthesis and production process in these fields.
Preparation Method:
The preparation method of-4-Bromo-3-chlorotoluene can be achieved by substituting toluene. A common synthetic method is to react toluene with bromine gas to produce 3-bromotoluene, which is then reacted with chlorine gas to produce the final product 4-Bromo-3-chlorotoluene.
Safety Information:
-4-Bromo-3-chrootoluene is an organic compound, which needs to be handled safely.
-It may be irritating to the eyes, skin and respiratory tract, so direct contact with skin and eyes should be avoided during contact, and good ventilation should be ensured.
-Wear appropriate personal protective equipment such as goggles, gloves and respiratory protection when used.
-When handling 4-Bromo-3-chorotoluene, follow safe operating procedures and adopt correct waste disposal methods in accordance with local regulations.
Last Update:2024-04-09 20:49:11