1-methoxy-3-(trimethylsiloxy)butadiene
1-Methoxy-3-(trimethylsiloxy)-butadiene
CAS: 54125-02-9;59414-23-2
Molecular Formula: C8H16O2Si
1-methoxy-3-(trimethylsiloxy)butadiene - Names and Identifiers
1-methoxy-3-(trimethylsiloxy)butadiene - Physico-chemical Properties
| Molecular Formula | C8H16O2Si |
| Molar Mass | 172.3 |
| Density | 0.885 g/mL at 25 °C (lit.) |
| Boling Point | 68-69 °C/14 mmHg (lit.) |
| Flash Point | 113°F |
| Water Solubility | Miscible with most organic solvents. Immiscible with water. |
| Specific Gravity | 0.89 |
| Merck | 14,6001 |
| BRN | 1616761 |
| Storage Condition | 2-8°C |
| Sensitive | 8: reacts rapidly with moisture, water, protic solvents |
| Refractive Index | n20/D 1.454(lit.) |
| MDL | MFCD00008498 |
1-methoxy-3-(trimethylsiloxy)butadiene - Risk and Safety
| Risk Codes | 10 - Flammable |
| Safety Description | S23 - Do not breathe vapour. S24/25 - Avoid contact with skin and eyes. |
| UN IDs | UN 1993 3/PG 3 |
| WGK Germany | 3 |
| FLUKA BRAND F CODES | 10-21 |
| TSCA | No |
| Hazard Class | 3 |
| Packing Group | III |
1-methoxy-3-(trimethylsiloxy)butadiene - Introduction
1-Methoxy-3-(trimethylsiloxy)-butadiene is an organic compound with the chemical formula C9H18O2Si. The following is a description of the properties, uses, preparation and safety information of the compound:
Nature:
-Appearance: Common colorless liquid
-Density: approx. 0.86g/cm³
-Boiling point: about 118-121°C
-Flash Point: approx. 16°C
-flammability: it is combustible, need to pay attention to fire prevention measures
Use:
- 1-Methoxy-3-(trimethylsiloxy)-butadiene is an organic reagent commonly used as a crosslinking agent in chemical synthesis or as a synthetic intermediate.
-It can be used to synthesize a variety of organic compounds, such as polymers, natural product synthesis, etc.
Preparation Method:
- 1-Methoxy-3-(trimethylsiloxy)-butadiene can be obtained by chemical synthesis.
-A commonly used synthesis method is to react 1-bromopropene with trimethylsilanol under base catalysis to generate 1-Methoxy-3-(trimethylsiloxy)-butadiene.
Safety Information:
- 1-Methoxy-3-(trimethylsiloxy)-butadiene is a chemical and should be handled with care.
-It is irritating and should be rinsed with water immediately when in contact with skin and eyes.
-Avoid contact with fire or high temperature during use or storage to prevent fire or explosion.
-use should pay attention to good ventilation, avoid inhalation of gas or solution.
-When handling the compound, follow relevant safety procedures and wear appropriate protective equipment (e. g. gloves, goggles, protective clothing, etc.).
Please note that the information provided above is for informational purposes only, laboratory procedures are to be followed for use, and refer to the supplier of the compound for more detailed and accurate safety data.
Nature:
-Appearance: Common colorless liquid
-Density: approx. 0.86g/cm³
-Boiling point: about 118-121°C
-Flash Point: approx. 16°C
-flammability: it is combustible, need to pay attention to fire prevention measures
Use:
- 1-Methoxy-3-(trimethylsiloxy)-butadiene is an organic reagent commonly used as a crosslinking agent in chemical synthesis or as a synthetic intermediate.
-It can be used to synthesize a variety of organic compounds, such as polymers, natural product synthesis, etc.
Preparation Method:
- 1-Methoxy-3-(trimethylsiloxy)-butadiene can be obtained by chemical synthesis.
-A commonly used synthesis method is to react 1-bromopropene with trimethylsilanol under base catalysis to generate 1-Methoxy-3-(trimethylsiloxy)-butadiene.
Safety Information:
- 1-Methoxy-3-(trimethylsiloxy)-butadiene is a chemical and should be handled with care.
-It is irritating and should be rinsed with water immediately when in contact with skin and eyes.
-Avoid contact with fire or high temperature during use or storage to prevent fire or explosion.
-use should pay attention to good ventilation, avoid inhalation of gas or solution.
-When handling the compound, follow relevant safety procedures and wear appropriate protective equipment (e. g. gloves, goggles, protective clothing, etc.).
Please note that the information provided above is for informational purposes only, laboratory procedures are to be followed for use, and refer to the supplier of the compound for more detailed and accurate safety data.
Last Update：2024-04-10 22:29:15
Supplier List
Multiple Specifications
Product Name: Danishefskys Diene Visit Supplier Webpage Request for quotationCAS: 59414-23-2
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Multiple Specifications
Product Name: Danishefskys Diene Visit Supplier Webpage Request for quotationCAS: 59414-23-2
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History