1-金刚烷溴化锌
bromozinc(1+) tricyclo[3.3.1.1~3,7~]decan-1-ide
CAS: 312624-15-0
Molecular Formula: C10H15BrZn
1-金刚烷溴化锌 - Names and Identifiers
| Name | bromozinc(1+) tricyclo[3.3.1.1~3,7~]decan-1-ide |
| Synonyms | 1-ADAMANTYLZINC BROMIDE 1-adamantylzinc bromide solution 1-Adamantylzinc bromide solution 0.5 in THF 1-Adamantylzinc bromide solution 0.5 M in THF bromozinc(1+) tricyclo[3.3.1.1~3,7~]decan-1-ide 1-ADAMANTYLZINC BROMIDE, 0.5M SOLUTION I N TETRAHYDROFURAN 1-Adamantylzinc bromide, Packaged under Argon in resealable ChemSeal? bottles |
| CAS | 312624-15-0 |
| InChI | InChI=1/C10H15.BrH.Zn/c1-7-2-9-4-8(1)5-10(3-7)6-9;;/h7-9H,1-6H2;1H;/q-1;;+2/p-1/rC10H15.BrZn/c1-7-2-9-4-8(1)5-10(3-7)6-9;1-2/h7-9H,1-6H2;/q-1;+1 |
1-金刚烷溴化锌 - Physico-chemical Properties
| Molecular Formula | C10H15BrZn |
| Molar Mass | 280.52 |
| Density | 0.97g/mLat 25°C |
| Boling Point | 187.1°C at 760 mmHg |
| Flash Point | 1°F |
| Water Solubility | Reacts with water. |
| Vapor Presure | 0.881mmHg at 25°C |
| Exposure Limit | ACGIH: TWA 50 ppm; STEL 100 ppm (Skin)OSHA: TWA 200 ppm(590 mg/m3)NIOSH: IDLH 2000 ppm; TWA 200 ppm(590 mg/m3); STEL 250 ppm(735 mg/m3) |
| Storage Condition | 2-8°C |
| Sensitive | Air Sensitive |
1-金刚烷溴化锌 - Risk and Safety
| Risk Codes | R14 - Reacts violently with water R19 - May form explosive peroxides R22 - Harmful if swallowed R36/37/38 - Irritating to eyes, respiratory system and skin. R40 - Limited evidence of a carcinogenic effect R37 - Irritating to the respiratory system R34 - Causes burns R17 - Spontaneously flammable in air R11 - Highly Flammable |
| Safety Description | S16 - Keep away from sources of ignition. S23 - Do not breathe vapour. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. |
| UN IDs | UN 2056 3/PG 2 |
| WGK Germany | 1 |
| Hazard Class | 4.3 |
1-金刚烷溴化锌 - Introduction
bromozinc(1 ) tricyclo[3.3.1.1~3,7 ~]decan-1-ide is an organic compound with the chemical formula [bromozinc(1 ) tricyclo [3.3.3.1.1~3,7 ~]decan-1-ide]. It is a colorless crystal or white solid, soluble in organic solvents.
This compound has a number of important properties and uses. First, it has good electron donor properties and can be used as a precursor for metal organic compounds. Secondly, it has a catalytic effect on some organic reactions, such as hydrogenation reaction and conjugate addition reaction of acetylene and pyridine. In addition, it can also be used for other catalytic reactions in organic synthesis.
The preparation of bromozinc(1 ) tricyclo[3.3.1.1~3,7 ~]decan-1-ide can be carried out by the following method: the product can be obtained by reacting adamantane and zinc bromide in an organic solvent. Typically, adamantane and zinc bromide are reacted in a stoichiometric ratio of 1:1 and at an appropriate temperature and reaction time.
Regarding safety information, bromozine (1 ) tricyclo[3.3.1.1~3,7 ~]decan-1-ide is an organic compound that requires safety during use and storage. It may cause irritation to the skin, eyes and respiratory system, so it is necessary to wear appropriate protective equipment, such as gloves, glasses and masks. In addition, it should be kept away from any combustible materials and stored in a dry, well-ventilated place. Follow safe practices when using and handling this compound. If you come into contact with this compound, rinse immediately with plenty of water and seek medical help.
This compound has a number of important properties and uses. First, it has good electron donor properties and can be used as a precursor for metal organic compounds. Secondly, it has a catalytic effect on some organic reactions, such as hydrogenation reaction and conjugate addition reaction of acetylene and pyridine. In addition, it can also be used for other catalytic reactions in organic synthesis.
The preparation of bromozinc(1 ) tricyclo[3.3.1.1~3,7 ~]decan-1-ide can be carried out by the following method: the product can be obtained by reacting adamantane and zinc bromide in an organic solvent. Typically, adamantane and zinc bromide are reacted in a stoichiometric ratio of 1:1 and at an appropriate temperature and reaction time.
Regarding safety information, bromozine (1 ) tricyclo[3.3.1.1~3,7 ~]decan-1-ide is an organic compound that requires safety during use and storage. It may cause irritation to the skin, eyes and respiratory system, so it is necessary to wear appropriate protective equipment, such as gloves, glasses and masks. In addition, it should be kept away from any combustible materials and stored in a dry, well-ventilated place. Follow safe practices when using and handling this compound. If you come into contact with this compound, rinse immediately with plenty of water and seek medical help.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: 1-ADAMANTYLZINC BROMIDE Visit Supplier Webpage Request for quotationCAS: 312624-15-0
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Spot supply
Product Name: 1-ADAMANTYLZINC BROMIDE Visit Supplier Webpage Request for quotationCAS: 312624-15-0
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
View History
1-金刚烷溴化锌
3-(Diethoxyphosphinyl)benzoic acid
2-(2-甲基-3-硝基苯基)乙酰氯
双酚A双(二苯基磷酸酯)
乙二胺二邻羟苯基大乙酸钠EDDHA-NA
Cobalt disulfamate
3-乙基-1-甲基吡唑-5-羧酸乙酯
2-(4-羟苯基)苯并[B]噻吩-6-醇
1-亚硝基-2-萘酚-3,6-二磺酸二钠盐 水合物
2-[[(2,6-DICHLOROPHENYL)SULFONYL]AMINO]-3-METHYLBUTANOIC ACID
3-(Diethoxyphosphinyl)benzoic acid
2-(2-甲基-3-硝基苯基)乙酰氯
双酚A双(二苯基磷酸酯)
乙二胺二邻羟苯基大乙酸钠EDDHA-NA
Cobalt disulfamate
3-乙基-1-甲基吡唑-5-羧酸乙酯
2-(4-羟苯基)苯并[B]噻吩-6-醇
1-亚硝基-2-萘酚-3,6-二磺酸二钠盐 水合物
2-[[(2,6-DICHLOROPHENYL)SULFONYL]AMINO]-3-METHYLBUTANOIC ACID