101238-01-1
2,2,6,6-Tetramethylpiperidin-4-yl dodecanoate
CAS: 101238-01-1
Molecular Formula: C21H41NO2
101238-01-1 - Names and Identifiers
| Name | 2,2,6,6-Tetramethylpiperidin-4-yl dodecanoate |
| Synonyms | 2,2,6,6-Tetramethylpiperidin-4-yl dodecanoate |
| CAS | 101238-01-1 |
| EINECS | 700-503-1 |
101238-01-1 - Physico-chemical Properties
| Molecular Formula | C21H41NO2 |
| Molar Mass | 339.55574 |
| Density | 0.903g/cm3 at 20℃ |
| Vapor Presure | 97.4Pa at 160℃ |
| Appearance | Liquid |
101238-01-1 - Introduction
Tetramethylpiperidinol laurate is a chemical compound with the molecular formula C16H30N2O2 and the structural formula (CH3)3N(CH2)11OCOCH3.
Its nature includes the following aspects:
1. Appearance: Tetramethylpiperidinol laurate is a colorless to light yellow liquid.
2. Solubility: it can be dissolved in common organic solvents, such as ethyl acetate, acetone and so on.
3. Stability: The compound is stable to light, humidity and heat, but will be affected by strong oxidizing substances.
The primary use of tetramethylpiperidinol laurate is as a solvent, lubricant and co-solvent. It is commonly used in paint, dyes, cleaning agents and other industrial fields, can also be used in pesticides, medicine and other fields.
The preparation of tetramethylpiperidine laurate can usually be prepared by the reaction of butyl lithium with tetramethylpiperidine ether. First, tetramethylpiperidine ether reacts with butyl lithium to form lithium salt at low temperature, then lauric acid is added to ethyl acetate and other solvents, and finally tetramethylpiperidine laurate product is obtained by dehydration reaction.
When using tetramethylpiperidine laurate, you need to pay attention to its safety information:
1. Irritating to skin and eyes, avoid contact with skin and eyes. For accidental contact, rinse immediately with plenty of water.
2. Avoid inhalation of its vapor, need to operate in a well-ventilated environment.
3. Store away from fire and oxidant, keep the container airtight, and avoid contact with water and humidity in the air.
4. It is strictly prohibited to discharge the compound into the environment and comply with relevant environmental protection regulations.
Its nature includes the following aspects:
1. Appearance: Tetramethylpiperidinol laurate is a colorless to light yellow liquid.
2. Solubility: it can be dissolved in common organic solvents, such as ethyl acetate, acetone and so on.
3. Stability: The compound is stable to light, humidity and heat, but will be affected by strong oxidizing substances.
The primary use of tetramethylpiperidinol laurate is as a solvent, lubricant and co-solvent. It is commonly used in paint, dyes, cleaning agents and other industrial fields, can also be used in pesticides, medicine and other fields.
The preparation of tetramethylpiperidine laurate can usually be prepared by the reaction of butyl lithium with tetramethylpiperidine ether. First, tetramethylpiperidine ether reacts with butyl lithium to form lithium salt at low temperature, then lauric acid is added to ethyl acetate and other solvents, and finally tetramethylpiperidine laurate product is obtained by dehydration reaction.
When using tetramethylpiperidine laurate, you need to pay attention to its safety information:
1. Irritating to skin and eyes, avoid contact with skin and eyes. For accidental contact, rinse immediately with plenty of water.
2. Avoid inhalation of its vapor, need to operate in a well-ventilated environment.
3. Store away from fire and oxidant, keep the container airtight, and avoid contact with water and humidity in the air.
4. It is strictly prohibited to discharge the compound into the environment and comply with relevant environmental protection regulations.
Last Update：2024-04-10 22:41:03
