101923-26-6 - Names and Identifiers
101923-26-6 - Physico-chemical Properties
Molecular Formula | C14H18Mn10*
|
Molar Mass | 241.23 |
Boling Point | ~80°C(lit.) |
Flash Point | 230°F |
Appearance | liquid |
Color | dark red |
Storage Condition | Room Temprature |
Sensitive | air sensitive, moisture sensitive |
101923-26-6 - Risk and Safety
Risk Codes | R17 - Spontaneously flammable in air
R36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | 26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
|
UN IDs | UN 3392 4.2/PG 1 |
WGK Germany | 3 |
Hazard Class | 4.2 |
101923-26-6 - Introduction
Bis(ethylcyclopentadienyl)manganese, chemical formula C12H16Mn, is an organic manganese compound. It has the following properties:
1. Appearance: It is a gray or brown solid.
2. Melting point and boiling point: Its melting point is about 80-90 ° C, and its boiling point is about 230-250 ° C.
3. Solubility: It can be dissolved in organic solvents such as benzene, ether and dichloromethane.
Bis(ethylcyclopentadienyl)manganese is mainly used as follows:
1. Catalyst: It can be used as a catalyst for asymmetric catalytic reactions, such as asymmetric hydrogenation and asymmetric carbonylation reactions in organic synthesis.
2. Electronic materials: It can be used as a precursor of organic metal compound electronic materials for the preparation of graphene, metal organic framework and other materials.
The method of preparing Bis(ethylcyclopentadienyl)manganese is usually through the following steps:
1. Cyclopentadiene was heated to 130°C, and ethyl bromide was added thereto.
2. Subsequently, ammonium dichloride (manganate) oxide is added to the reaction system in the next step.
3. After completion of the reaction, Bis(ethylcyclopentadienyl)manganese was obtained by filtration.
Regarding safety information, Bis(ethylcyclopentadienyl)manganese is an organometallic compound with certain toxicity and irritation. During operation and use, the following safety measures should be observed:
1. Avoid contact with skin, eyes and respiratory tract. Wear protective gloves, goggles and masks when using.
2. Operate in a well-ventilated place to avoid inhaling the generated gas or vapor.
3. Storage should be sealed and stored in a dry, cool place, away from fire and flammable materials.
Last Update:2024-04-10 22:29:15